[Voyage-linux] Testing pre-0.8.0 - hwclock

[Teco Boot]

Op 16 sep 2011, om 16:34 heeft themrorange at gmail.com het volgende geschreven:

> Hi,
> 
> Seems to me that voyage 0.7.5 has the same problem.
Yes. 0.7.0 also. I remember 0.6.x (Lenny) was better.

I check all my 0.7.0 bypasses and check if solution is in 0.8.0
I stepped over 0.7.5. 

Teco

> I'll try your patch on my Alix 2d3 and I'll let you know
> 
> Davide
> 
> 
> On 16 Sep 2011, at 13:43, Teco Boot wrote:
> 
>> Hi Punky,
>> 
>> I started testing 0.8.0. Development: VMware, target Alix6.
>> I'll post my findings.
>> 
>> hwclock
>> =======
>> During shutdown, there is an error:
>> Saving the system clock.
>> Cannot access the Hardware Clock via any known method.
>> I adjusted /etc/init.d/hwclock.sh - hwclockfirst.sh for saving & resoring clock during (soft)reboot:
>> HWCLOCKPARS="--directisa -u --noadjfile"
>> Ref:
>> http://www.pcengines.info/forums/?page=post&id=27136143-ABFC-4447-87DE-2B942342FE71&fid=40251191-FF24-48A8-BB0E-995B04812ADE
>> 
>> 
>> It would be nice to add the parm in a /etc/default/hwclock file, with content:
>> # Defaults for hwclock.sh and hwclockfirst.sh initscripts
>> 
>> # Set this to any options you might need to give to hwclock, such
>> # as machine hardware clock type for Alphas.
>> HWCLOCKPARS="--directisa -u --noadjfile"
>> 
>> 
>> And update the initscripts with:
>> # Include hwclock defaults if available
>> if [ -f /etc/default/hwclock ] ; then
>>   . /etc/default/hwclock
>> fi
>> 
>> 
>> Thanks, Teco
>> 
>> 
>> _______________________________________________
>> Voyage-linux mailing list
>> Voyage-linux at list.voyage.hk
>> http://list.voyage.hk/mailman/listinfo/voyage-linux
> 
> 
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux