[Voyage-linux] Can't boot voyage linux 0.8.5
Simon Hafner
(spam-protected)
Fri Aug 17 08:58:29 HKT 2012
2012/8/16 Jim Cromie <jim.cromie at gmail.com>:
> On Tue, Aug 14, 2012 at 11:43 PM, Simon Hafner <reactormonk at gmail.com> wrote:
>> 2012/8/14 Jim Cromie <jim.cromie at gmail.com>:
>>> On Mon, Jul 23, 2012 at 2:54 AM, liquid <liquidee at gmail.com> wrote:
>>> root at voyage:~# dmesg | grep -i -E 'tsc|clocksource'
>>> [ 0.000000] Fast TSC calibration using PIT
>>> [ 0.401200] Switching to clocksource pit
>>> [ 6.431014] Switching to clocksource tsc
>>> [ 8.423737] Clocksource tsc unstable (delta = -103967911 ns)
>>> [ 8.433916] Switching to clocksource pit
>>> [ 47.369942] Switching to clocksource scx200_hrt
>>
>> I don't see any of those.
>
> hmm - thats odd.
> Im running daily-build now, so cant go back and check,
> but those messages have been there as long as I can remember.
>
> Can you confirm that the Alix actually has a Geode ?
> if not, then the clocksource business above isnt relevant.
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 10
model name : Geode(TM) Integrated Processor by AMD PCS
stepping : 2
[...]
> If it is a geode, please try daily-build,
> then we can closely compare your dmesg to mine.
PC Engines ALIX.3 v0.99h
640 KB Base Memory
261120 KB Extended Memory
01F0 Master 044A CF 4GB
Phys C/H/S 7769/16/63 Log C/H/S 971/128/63
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997,1998,1999 Intel Corporation
VIA Rhine III Management Adapter v2.43 (2005/12/15)
CLIENT MAC ADDR: 00 0D B9 15 ED 2C
CLIENT IP: 192.168.1.11 MASK: 255.255.255.0 DHCP IP: 192.168.1.200
GATEWAY IP: 192.168.1.1
PXELINUX 4.05 20120630 Copyright (C) 1994-2011 H. Peter Anvin et al
==============================================================================
__ __
\ \/ /___ __ __ ___ ___ ___
\ // _ \\ \/ /,-_ |/ _ |/ -_)
\/ \___/ \ / \___,\_ |\___|
_/_/ _'_|
{ V o y a g e } - L i n u x
< http://linux.voyage.hk >
1. PXE Boot Voyage Linux with a login shell
2. Start automated install for WRAP (/dev/hda and 38400 serial console)
3. Start automated install for ALIX (/dev/hda and 38400 serial console)
4. Start automated install for 45/48xx (/dev/hda and 19200 serial console)
5. Start automated install for 55xx (/dev/hda and 19200 serial console)
6. Start automated install for gerenic PC (/dev/hda and no serial console)
==============================================================================
boot: 3
Loading linux....
Loading initrd.img........ready.
[ 0.000000] Linux version 3.4.4-voyage (unknown)
(root at punknix-pluto) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP
PREEMPT S
un Aug 12 12:01:41 HKT 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[ 0.000000] RAMDISK: 0fa3b000 - 0ffdf000
[ 0.000000] ACPI Error: A valid RSDP was not found (20120320/tbxfroot-219)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 0 - 10000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010000
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00010000
[ 0.000000] Using APIC driver default
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap:
10000000:eff00000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages/cpu @cfff0000 s24256 r0 d20800 u45056
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 64912
[ 0.000000] Kernel command line: initrd=initrd.img autoinstall=alix
boot=live netboot=nfs nfsroot=192.168.1.200:/live/image
live-getty noautologin all_generic_ide console=ttyS0,38400n8 BOOT_IMAGE=linux
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 249148k/262144k available (2812k kernel code,
12548k reserved, 1095k data, 344k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] .init : 0xc13d1000 - 0xc1427000 ( 344 kB)
[ 0.000000] .data : 0xc12bf0a7 - 0xc13d1000 (1095 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12bf0a7 (2812 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 498.014 MHz processor.
[ 0.003007] Calibrating delay loop (skipped), value calculated
using timer frequency.. 996.02 BogoMIPS (lpj=498014)
[ 0.005015] pid_max: default: 32768 minimum: 301
[ 0.007337] Mount-cache hash table entries: 512
[ 0.010077] SMP alternatives: switching to UP code
[ 0.020087] Freeing SMP alternatives: 16k freed
[ 0.021184] weird, boot CPU (#0) not listed by the BIOS.
[ 0.022014] SMP motherboard not detected.
[ 0.023013] Local APIC not detected. Using dummy APIC emulation.
[ 0.024010] SMP disabled
[ 0.025012] Performance Events: no PMU driver, software events only.
[ 0.033034] Brought up 1 CPUs
[ 0.034018] Total of 1 processors activated (996.02 BogoMIPS).
[ 0.036286] devtmpfs: initialized
[ 0.039260] NET: Registered protocol family 16
[ 0.047097] PCI: PCI BIOS revision 2.10 entry at 0xfced9, last bus=0
[ 0.048018] PCI: Using configuration type 1 for base access
[ 0.071645] bio: create slab <bio-0> at 0
[ 0.073533] ACPI: Interpreter disabled.
[ 0.074704] vgaarb: loaded
[ 0.077150] SCSI subsystem initialized
[ 0.079387] PCI: Probing PCI hardware
[ 0.080357] PCI host bridge to bus 0000:00
[ 0.081046] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.082037] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.091914] Switching to clocksource pit
[ 0.092520] pnp: PnP ACPI: disabled
[ 0.119722] NET: Registered protocol family 2
[ 0.121309] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.123971] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.125413] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.126943] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.128020] TCP: reno registered
[ 0.128753] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.129303] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.131580] NET: Registered protocol family 1
[ 0.133250] RPC: Registered named UNIX socket transport module.
[ 0.135043] RPC: Registered udp transport module.
[ 0.136247] RPC: Registered tcp transport module.
[ 0.137382] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.139379] Trying to unpack rootfs image as initramfs...
[ 1.531171] Freeing initrd memory: 5776k freed
[ 1.539366] platform rtc_cmos: registered platform RTC device (no
PNP device found)
[ 1.541952] microcode: AMD CPU family 0x5 not supported
[ 1.545404] alix: system is recognized as "PC Engines ALIX.3 v0.99h"
[ 1.552348] NFS: Registering the id_resolver key type
[ 1.554286] msgmni has been set to 497
[ 1.557271] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 254)
[ 1.558517] io scheduler noop registered
[ 1.559341] io scheduler deadline registered
[ 1.560345] io scheduler cfq registered (default)
[ 1.725666] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.726903] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 1.728075] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 1.731901] Linux agpgart interface v0.103
[ 1.747356] brd: module loaded
[ 1.748680] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344
could not acquire Mutex [0x1] (20120320/utmutex-276)
[ 1.751753] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344
could not acquire Mutex [0x1] (20120320/utmutex-276)
[ 1.754821] cs5535-gpio cs5535-gpio: reserved resource region [io
0x6100-0x61ff]
[ 1.755591] gpiochip_add: registered GPIOs 0 to 31 on device: cs5535-gpio
[ 1.757079] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344
could not acquire Mutex [0x1] (20120320/utmutex-276)
[ 1.762191] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344
could not acquire Mutex [0x1] (20120320/utmutex-276)
[ 1.766267] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344
could not acquire Mutex [0x1] (20120320/utmutex-276)
[ 1.769293] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[ 1.771080] Uniform Multi-Platform E-IDE driver
[ 1.773270] ide-gd driver 1.18
[ 1.776233] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.778609] i8042: No controller found
[ 1.780580] mousedev: PS/2 mouse device common for all mice
[ 1.782065] cpuidle: using governor ladder
[ 1.783428] cpuidle: using governor menu
[ 1.786702] TCP: cubic registered
[ 1.787730] NET: Registered protocol family 17
[ 1.788190] Registering the dns_resolver key type
[ 1.789732] Using IPI No-Shortcut mode
[ 1.792930] Freeing unused kernel memory: 344k freed
[ 1.794921] Write protecting the kernel text: 2816k
[ 1.795796] Write protecting the kernel read-only data: 908k
Loading, please wait...
[ 1.864421] scsi0 : ata_generic
[ 1.866827] scsi1 : ata_generic
[ 1.867829] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.868770] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.023345] ata1.00: CFA: CF 4GB, 20080116, max UDMA/133
[ 2.024318] ata1.00: 7831152 sectors, multi 0: LBA
[ 2.024986] ata1.00: configured for UDMA/133
[ 2.037480] scsi 0:0:0:0: Direct-Access ATA CF 4GB
2008 PQ: 0 ANSI: 5
[ 2.040166] sd 0:0:0:0: [sda] 7831152 512-byte logical blocks:
(4.00 GB/3.73 GiB)
[ 2.042004] sd 0:0:0:0: [sda] Write Protect is off
[ 2.043616] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.540924] Switching to clocksource tsc
Btw, I tried cs5535-clockevt.irq=5 cs5535-mfgpt.mfgptfix=1 as kernel
line, but that didn't help either.
More information about the Voyage-linux
mailing list