[Voyage-linux] Voyage current fails to boot PXE

[Kim-man 'Punky' TSE]

Hi all,

Try adding "ethdevice=eth0" to APPEND lines in /tftpboot/pxelinux.cfg/default

-    APPEND initrd=initrd.img boot=live netboot=nfs nfsroot=192.168.1.200:/live/image live-getty noautologin 
all_generic_ide debug console=ttyS0,9600n8
+    APPEND initrd=initrd.img boot=live netboot=nfs nfsroot=192.168.1.200:/live/image ethdevice=eth0 live-getty 
noautologin all_generic_ide debug console=ttyS0,9600n8


On 12/4/2012 4:33 PM, Roel Huybrechts wrote:
> Hi Christian,
>
> Unfortunately I haven't found a solution to this problem yet. I did some testing however and found that a minimally 
> adjusted Debian live build shows the same issue, so perhaps this is an upstream problem?
>
> I am eager to find a solution though, because I need the PXE installation to install 50+ boards. I'd rather not 
> install them manually. ;) So any input in resolving this is welcome.
>
> Kind regards!
>

-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage ONE   (http://linux.voyage.hk/voyage-one)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
* Voyage Store   (http://store.voyage.hk)