[Voyage-linux] voyage 0.9-rc1 and 0.8.5 boot problem on Alix 3d2

[Markus Engelbrecht]

Hi Russell,

did you solve that issue? I run here into the same issue with a Alix 3d3...

Best Regards
Markus

-----


2012/11/4 Russell Lang <gsview at ghostgum.com.au>

> I have an Alix 3D2 that has been running Voyage 0.6.2 for 3 years.
> A new USB device needs a later kernel, so I'm trying to install Voyage
> 0.9-rc1.
>
> I used voyage 0.9-rc1 LiveCD running under VMware Workstation 9 to write
> voyage linux to a 4GB CF card via a USB card reader.  When I try to boot
> on the
> Alix I get the following:
>
> On the console:
>  GRUB Loading stage 1.5
>  GRUB loading, please wait
>
> On the serial port:
>   Booting 'Voyage Linux 0.9 (Build Date 20120927)'
>
>  root (hd0,0)
>   Filesystem type is ext2fs, partition type 0x83
>  kernel /vmlinuz root=LABEL=ROOT_FS  console=ttyS0,38400n8
>     [Linux-bzImage, setup=0x3400, size=0x1c1f20]
>  initrd /initrd.img
>     [Linux-initrd @ 0xf1fc000, 0x5a3078 bytes]
>
> Then the console changes to blinking cursor only.
> No more output to serial port.
> Boot stalls at this point.
>
>
> With the older 0.6.2 the next step is on the console
>  Decompressing Linux... Parsing ELF... done.
>  Booting the kernel.
>
> Then boot log messages continue on serial port
>
> Any suggestions on why voyage linux won't boot on the Alix 3D2?
>
>
> Russell Lang                   gsview at ghostgum.com.au
> Ghostgum Software Pty Ltd      http://www.ghostgum.com.au/
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20121230/580433ca/attachment.html>