[Voyage-linux] Voyage MPD 7.5 QB9 not recognized at boot, have to replug

[Kim-man 'Punky' TSE]

Hi Maarten,

In QB-9, there is a switch to select USB audio class 1 and 2.  AFAIK, you must select USB audio class 2 all the time.

We have a few users using QB-9 without problem.  They can provide more accurate answer if I am wrong.

Regards,
Punky

On 2/2/2012 4:22 AM, Muffinman wrote:
> Howdy all,
>
> I've got a Soekris net5501 running Voyage MPD 7.5, a custom kernel and
> the Ayre QB-9. For the most part it is running very well, except for one
> thing that is. The QB9 is not recognized at boot. I have to unplug the
> machine and plug it back in before it is recognized. The strange thing
> is, after a number of boots the problem resolves itself somehow.
> However, at some point I use the machine a couple of sessions without
> the QB9 attached for some experimenting and then the whole things starts
> over again. I had this problem in past also with a Debian Squeeze setup
> running on a HP computer. Then the problem also magically resolved
> itself after a number of boots.
>
> Does anyone recognize this issue or does anyone have a (possible)
> solution? I've attached the output of dmesg in case that helps.
> Unfortunately I don't have this output for the situation where the QB9
> is recognized properly.
>
> Kind regards, Maarten
> st.voyage.hk/mailman/listinfo/voyage-linux 


-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage ONE   (http://linux.voyage.hk/voyage-one)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
* Voyage Store   (http://store.voyage.hk)