[Voyage-linux] Re: Voyage MPD 7.5 QB9 not recognized at boot, have to replug

[Muffinman]

Howdy all,

I've just tried to find some software workaround for my issue so I don't
have to physically unplug, replug the device. Unfortunately that didn't
go well. I tried to unload and reload the following kernel modules:

ehci_hcd, ohci_hcd, option, usb _wwan, usbserial, usbcore

The command lsusb -v still lists only the usb ports/hubs (until the
unplug, replug action).

Perhaps anyone has another idea to manually restart the soundcard?

Kind regards, Maarten



On 01-02-12 21:22, Muffinman wrote:
> Howdy all,
>
> I've got a Soekris net5501 running Voyage MPD 7.5, a custom kernel and
> the Ayre QB-9. For the most part it is running very well, except for one
> thing that is. The QB9 is not recognized at boot. I have to unplug the
> machine and plug it back in before it is recognized. The strange thing
> is, after a number of boots the problem resolves itself somehow.
> However, at some point I use the machine a couple of sessions without
> the QB9 attached for some experimenting and then the whole things starts
> over again. I had this problem in past also with a Debian Squeeze setup
> running on a HP computer. Then the problem also magically resolved
> itself after a number of boots.
>
> Does anyone recognize this issue or does anyone have a (possible)
> solution? I've attached the output of dmesg in case that helps.
> Unfortunately I don't have this output for the situation where the QB9
> is recognized properly.
>
> Kind regards, Maarten