[Voyage-linux] Alix3D3 and Voyage 0.8.0: no LEDs?

[Achim Vollhardt]

Hello fellow Voyagers,

(sorry if this has been already adressed, but I have not found anything 
in the list)

I have a small problem with the otherwise straightfoward and clean 
installation of Voyage 0.8.0 on my Alix 3D3:

I have no control of the LEDs, which was possible with 0.7.5 (e.g. 
heartbeat).

It seems that the following folders are missing:

/sys/class/leds is empty with 0.8.0

It included

alix:1 alix:2 alix:3

in the 0.7.5 image.

Loaded modules:
led_alix2 is listed in /etc/modules

BUT 'modprobe leds_alix2' results in:

root at voyage:~# modprobe leds_alix2
WARNING: All config files need .conf: /etc/modprobe.d/hostap-utils, it 
will be ignored in a future release.
WARNING: /etc/modprobe.d/ALIX.conf line 8: ignoring bad line starting 
with 'options'
WARNING: /etc/modprobe.d/ALIX.conf line 9: ignoring bad line starting 
with 'options'
FATAL: Error inserting leds_alix2 
(/lib/modules/3.0.0-voyage/kernel/drivers/leds/leds-alix2.ko): No such 
device



Any ideas how to solve this?
Thanks!
Achim Vollhardt