[Voyage-linux] issue with alix boards

[Rich E Neese]

On 1/7/2012 10:55 AM, Michael Steinmann wrote:
> nothing, just a fresh installation and dd the CF to a file.
> @Rich: what is the problem?
>
> 2012/1/7 Mirco Schmidt <mirco.schmidt at mac.com
> <mailto:mirco.schmidt at mac.com>>
>
>     Thx, but as it's far wasn't there some modification's from the
>     original version?
>
>     Just asking because I'm interested in what the guys at PCe did for
>     better integrating a lix Hardware…
>
>
>     Greetz
>     Mirco
>
>     Am 07.01.2012 um 12:17 schrieb Michael Steinmann:
>
>>     http://www.pcengines.ch/file/voyage_versions.log
>>
>>
>>     2012/1/7 Mirco Schmidt <mirco.schmidt at mac.com
>>     <mailto:mirco.schmidt at mac.com>>
>>
>>         Where's the difference, is there some change log?
>>
>>
>>         Am 07.01.2012 um 11:49 schrieb Michael Steinmann:
>>
>>>         try this image:
>>>         http://www.pcengines.ch/file/voyage_current.rar
>>>
>>>
>>>
>>>         2012/1/7 Mirco Schmidt <mirco.schmidt at mac.com
>>>         <mailto:mirco.schmidt at mac.com>>
>>>
>>>             I've like half a dozen and they all boot fine…
>>>
>>>             Am 07.01.2012 um 04:52 schrieb Rich E Neese:
>>>
>>>             > any one here have a alix 3c2 board. and tried to load up
>>>             > voyage-one-0.8.0 on it . I can not get it to boot...
>>>             >
>>>             >
>>>             > _______________________________________________
>>>             > Voyage-linux mailing list
>>>             > Voyage-linux at list.voyage.hk
>>>             <mailto:Voyage-linux at list.voyage.hk>
>>>             > http://list.voyage.hk/mailman/listinfo/voyage-linux
>>>
>>>
>>>             _______________________________________________
>>>             Voyage-linux mailing list
>>>             Voyage-linux at list.voyage.hk
>>>             <mailto:Voyage-linux at list.voyage.hk>
>>>             http://list.voyage.hk/mailman/listinfo/voyage-linux
>>>
>>>
>>
>>
>
>
well I found the issue and fixed it
it seems some of the connectors on the cf socket came loose
I ran a hot pinpoint iron on each on and now it boots
so I guess setting with out use for so long it had soem small issue
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20120107/55e71f87/attachment.html>