[Voyage-linux] Alix3D3 and Voyage 0.8.0: no LEDs? (SOLVED)

[Jim Cromie]

On Sun, Feb 26, 2012 at 3:46 AM, Achim Vollhardt <avollhar at physik.uzh.ch> wrote:
> Thanks to Lee, the problem has been solved:
>
>> Try adding:
>>
>> leds-alix2.force=1

FYI, daily build should be adding that automatically,
via VOYAGE_SYSTEM_MODULES in etc/voyage-profiles/alix.pro

[jimc at groucho voyage-profiles]$ more alix.pro

VOYAGE_PROFILE=ALIX
VOYAGE_SYSTEM_CONSOLE=serial
VOYAGE_SYSTEM_SERIAL=38400
VOYAGE_SYSTEM_PCMCIA=no
VOYAGE_SYSTEM_MODULES="lm90; w83627hf; scx200_acb base=0x810,0x820;
geodewdt; led-class; leds-alix2
 force; ledtrig-heartbeat; ledtrig-timer; ledtrig-netdev"

Is there a need to have alix2d, alix3d etc ??

could you try daily-build, and verify the module parameters ??

>>
>> as a kernel boot parameter and see how it works.
>>
>> If the kernel has the right options compiled in, this should get you
>> going.
>>
>> The problem is that on the 2Dxx it can detect the LED's... on the 3D3
>> (because of the different BIOS), it cannot. This is the short
>> explanation... you can dig on the internet to find why.
>>
>>
>> Cheers!
>>
>>
>> Lee
>
>
> The devices are now listed in the /sys/class/leds folder and can be
> accessed.. Thanks again!
>
> Achim
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux