[Voyage-linux] Bug reports

[Stanislav Sinyagin]

thanks for the hint, but Voyage doesn't seem to store any persistent network settings, even in remountrw mode:

[75210.009519] usb 1-2: new high speed USB device number 3 using ehci_hcd
[75211.037649] asix 1-2:1.0: eth3: register 'asix' at usb-0000:00:0f.5-2, ASIX AX88772 USB 2.0 Ethernet, 00:80:c8:3c:50:87

ssinyagin at alix102:~$ ls -al   /etc/udev/rules.d/
total 12
drwxr-xr-x 2 root root 4096 Oct 30 21:19 .
drwxr-xr-x 4 root root 4096 Oct 30 21:18 ..
lrwxrwxrwx 1 root root   15 Feb 29 21:48 85-pcmcia.rules -> ../pcmcia.rules
-rw-r--r-- 1 root root  198 Oct 30 21:19 mount-usb.rules
ssinyagin at alix102:~$ 








>________________________________
> From: Gustin Johnson <gustin at meganerd.ca>
>To: Stanislav Sinyagin <ssinyagin at yahoo.com> 
>Cc: Kim-man 'Punky' TSE <punkytse at punknix.com>; "voyage-linux at list.voyage.hk" <voyage-linux at voyage.hk> 
>Sent: Monday, March 12, 2012 7:19 PM
>Subject: Re: [Voyage-linux] Bug reports
> 
>
>I use ddrescue for cloning CF cards.  You sometimes have to be careful about the /etc/udev/rules.d/70-persistent-net.rules file if your interfaces do not get names that you expect.
>
>
>Hth,
>
>
>2012/3/5 Stanislav Sinyagin <ssinyagin at yahoo.com>
>
>I'll have spare CF cards by Thursday, and will be able to reproduce the issue with vmstat. By the way, "top" also showed some strange results, although it did not crash.
>>
>>
>>
>>In regards to cloning, I just realised, I could do 
>>
>>dump -f -  /dev/sda1 | restore -f - /dev/hdc1
>>and then grub install.
>>
>>
>>As Voyage root system is in readonly mode, cloning from a live system is a safe operation. I was just in a hurry, so thinking was in lower priority :)
>>
>>
>>
>>
>>
>>
>>
>>>________________________________
>>> From: Kim-man 'Punky' TSE <punkytse at punknix.com>
>>>
>>>To: Stanislav Sinyagin <ssinyagin at yahoo.com> 
>>>Cc: "voyage-linux at list.voyage.hk" <voyage-linux at voyage.hk> 
>>>Sent: Tuesday, March 6, 2012 2:38 AM
>>>
>>>Subject: Re: [Voyage-linux] Bug reports
>>> 
>>>
>>>Hi Stanislav,
>>>
>>>On 3/6/2012 12:29 AM, Stanislav Sinyagin wrote:
>>>> 
>>>> With the kernel 3.2.x, "vmstat 1" was running for few seconds, and then went off with "floating point error". If some user process is running and consuming some CPU, vmstat was running without problem. So, it looks like a division by zero or something like that.
>>>Show me the vmstat output and at a point that it flows "floating point error".
>>>> 
>>>> for the cloning -- I was trying to clone an ALIX board into an USB-attached CF card, with the idea to use it in another ALIX. It duidn't go well, so I just went the usual installation path.
>>>Copy "itself" didn't work.  At least I know it won't work so I never try.  It is better to take your system offline and do a disk image clone on a 3rd machine.
>>>> I used "voyage.update" script with "/" as source distribution path. When CF was mounted in /tmp/cf, it even finished successfully, but CF was not
 bootable.
>>>> 
>>>> 
>>>
>>>
>>>-- Regards,
>>>Kim-man "Punky" Tse
>>>
>>>* Open Source Embedded Solutions and Systems
>>>  - Voyage Linux (http://linux.voyage.hk)
>>>  - Voyage ONE   (http://linux.voyage.hk/voyage-one)
>>>  - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
>>>* Voyage Store   (http://store.voyage.hk)
>>>
>>>
>>>
>>>
>>>
>>_______________________________________________
>>Voyage-linux mailing list
>>Voyage-linux at list.voyage.hk
>>http://list.voyage.hk/mailman/listinfo/voyage-linux
>>
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20120312/b958547a/attachment.html>