[Voyage-linux] USB DAC problems with Voyage 0.8 and new Voyage 0.8.5

[Bruno]

Hi Kim,

let me explain better. I have an Alix board wit a CF card on which I 
have installed Voyage 0.8.5 from an USB stick following your procedure 
as explained in your website. So the O.S. is not the CD Live version, 
but the complete expanded version. After the installation I configured 
mpd and the DAC, connected by USB cable, worked correctly. I then 
rebooted by the command "reboot" and after that the DAC, via USB, does 
not sound. Because the DAC has also a S/PDIF output, I tried to play it 
via S/PDIF, and it sounds correctly. I have music files both standard 
and high sample rates (e.g. 44,1 - 96 and 192 kHz) but none of them play 
via USB output but only via S/PDIF output. I now will try to leave the 
O.S. on the USB stick (the CD live version) and configure it to see if 
in this way it sounds via USB also after reboot. I will let you know.

Thanks for your support!

Ciao
Bruno

Nella citazione in data martedì 29 maggio 2012 03:18:39, Kim-man 'Punky' 
TSE ha scritto:
>
>
> On 5/29/2012 4:27 AM, Bruno wrote:
>>
>> Hi Kim,
>>
>> it seems that configuration is the same, but how do you explain that
>> after the very first reboot after installation USB does not sound
>> anymore?
>
> It depends how you "reboot" the board. If replug the power supply
> everything could be lost.
>>
>>
>> If the DAC output is S/PDIF (I have also a Juli@ soundcard) it sound
>> correctly..
>
> So what not working now?
>>
>>
>> mps play output:
>>
>> The Alan Parsons Project - Silence And I
>> [playing] #2/2 0:10/7:23 (2%)
>> volume: 74% repeat: off random: off single: off consume: off
>
> I seems mpd is playing the music! And what is the bit rate/sample rate
> of your music files?
>>
>>
>> Thanks
>> Bruno
>>
>