[Voyage-linux] Mounting problem

[Adriano Dias]

Today I did some tests and I still have the initial problem... Follows a 
description of the tests I did:

1- I moved the Alix Kit near the AP: No change in problem
2- I plugged the ethernet to the Alix Kit: Everything worked fine
3- I installed MPD 0.16.0 on a notebook running Ubuntu (12.10 64 bit) 
and tested with the same DB config (accessing my Unraid server), 
connecting wireless: Everything worked fine

Maybe the wifi connection is happening too late (only for Voyage MPD) 
and the server volume is available after the boot, so I need to send a 
command to mount the volume manually. Any ideas to solve this?

Regards,

Adriano Dias


On 28-Jan-13 13:44, Adriano Dias wrote:
> On 28-Jan-13 13:33, Punky Tse wrote:
>>
>> On 1/28/2013 11:18 PM, Adriano Dias wrote:
>>> I included this share in the fstab so I can have it mounted after 
>>> the boot but it is not working...
>>> The share is available only after I send a "mount -a" command.
>>> Can anybody help on this?
>>>
>> Probably one of the network interface is not up at boot.  Do you have 
>> a interface enabled but the link is downed at boot?
>>
> Hi, I use the Voyage MPD Wireless Kit (Voyage MPD + ALIX3D2 + 4GB CF + 
> Wireless 11a/b/g/n Atheros) and I leave the server and the wireless 
> network on all the time.
> The box (Alix) is turned on by plugging the power supply (12V) and I 
> check this via SSH after some time (to allow the initialization 
> process end).
>
> Is there any way to check the signal power at the Alix? Or a log were 
> I can check if there was a network signal variation?
>
> I think this is the only thing in the "circuit" that can oscillate... 
> And I can't "feel" this during the ssh session.
>
> Thanks and regards
>
> *
> * 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20130129/0fae892b/attachment.html>