[Voyage-linux] Getting started

[Kim-man 'Punky' TSE]

Hi Norton,
On 7/16/2013 1:02 AM, Norton Allen wrote:
> 1. When booting from the Live CD, Linux recognizes both ethernet
> interfaces, but after installation, it only sees one. What do I need to
> do to have both recognized?
edit /etc/network/interfaces.  Then, start the interface by "ifup ethX"

> 2. I need to transfer data from a CF card formatted for QNX4. Can I
> update with an appropriate FS module so mount will accept -t qnx4, or do
> I need to do something more drastic, like rebuild the kernel?
You can to install debian stock kernel as QNX module is not included in voyage.
> 3. During boot-up, the console output looks fine until late in the
> process, then it switches to huge block letters with only about 40
> columns. Is there any way to improve that?
What PC hardware you are using?  You can append "nomodeset" to kernel parameters in /boot/grub/menu.lst.

-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
   - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)