[Voyage-linux] No root device found on Soekris 4511, dropped to initramfs
Klaas DC
(spam-protected)
Wed Mar 5 03:31:51 HKT 2014
I installed Voyage Linux on a 512MB Sandisk CF card, to use on a Soekris
4511. It boots fine, but no root devices are found...
Since 45xx was mentioned in supported devices, I may be missing something?
Below is the output on serial after booting:
--------------
GRUB Loading stage2...
GNU GRUB version 0.97 (639K lower / 64512K upper memory)
+-------------------------------------------------------------------------+
| Voyage Linux 0.9.5 (Build Date 20140303) |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+-------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, or 'c' for a command-line.
Booting 'Voyage Linux 0.9.5 (Build Date 20140303) '
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz root=LABEL=VOYAGE_FS console=ttyS0,38400n8 ide=nodma all_gener
ic_ide
[Linux-bzImage, setup=0x3c00, size=0x1e5640]
initrd /initrd.img
[Linux-initrd @ 0x39c9000, 0x626617 bytes]
[ 0.000000] Linux version 3.12.9-voyage (root at punknix-neptune) (gcc
version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Wed Feb 26 13:49:03 HKT 2014
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI not present or invalid.
[ 0.000000] e820: last_pfn = 0x4000 max_arch_pfn = 0x100000
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x03400000-0x037fffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x033fffff]
[ 0.000000] init_memory_mapping: [mem 0x03800000-0x03ffffff]
[ 0.000000] RAMDISK: [mem 0x039c9000-0x03feffff]
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found
(20130725/tbxfroot-212)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 64MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 04000000
[ 0.000000] low ram: 0 - 04000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x03ffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x03ffffff]
[ 0.000000] Using APIC driver default
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x04000000-0xffefffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @c3ff1000 s25664 r0 d23488 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 16158
[ 0.000000] Kernel command line: root=LABEL=VOYAGE_FS
console=ttyS0,38400n8 ide=nodma all_generic_ide
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 53328K/65144K available (2971K kernel code, 215K
rwdata, 980K rodata, 372K init, 184K bss, 11816K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xc4800000 - 0xff7fe000 ( 943 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
[ 0.000000] .init : 0xc1413000 - 0xc1470000 ( 372 kB)
[ 0.000000] .data : 0xc12e6fda - 0xc1412c40 (1199 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12e6fda (2971 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] WARNING: Persistent clock returned invalid value!
[ 0.000000] Check your CMOS/BIOS settings.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.002000] Calibrating delay loop... 42.24 BogoMIPS (lpj=21120)
[ 0.017000] pid_max: default: 32768 minimum: 301
[ 0.021000] Mount-cache hash table entries: 512
[ 0.037000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.037000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.037000] tlb_flushall_shift: -1
[ 0.084000] Freeing SMP alternatives memory: 20K (c1470000 - c1475000)
[ 0.088000] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.089000] smpboot: SMP motherboard not detected
[ 0.090000] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.091000] smpboot: SMP disabled
[ 0.092000] Performance Events: no PMU driver, software events only.
[ 0.107000] Brought up 1 CPUs
[ 0.108000] smpboot: Total of 1 processors activated (42.24 BogoMIPS)
[ 0.120000] devtmpfs: initialized
[ 0.153000] NET: Registered protocol family 16
[ 0.208000] cpuidle: using governor ladder
[ 0.209000] cpuidle: using governor menu
[ 0.221000] PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=1
[ 0.222000] PCI: Using configuration type 1 for base access
[ 0.705000] bio: create slab <bio-0> at 0
[ 0.720000] ACPI: Interpreter disabled.
[ 0.736000] vgaarb: loaded
[ 0.755000] SCSI subsystem initialized
[ 0.785000] PCI: Probing PCI hardware
[ 0.792000] PCI host bridge to bus 0000:00
[ 0.793000] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.794000] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.795000] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[ 0.873000] Switched to clocksource pit
[ 0.880755] pnp: PnP ACPI: disabled
[ 1.351656] pci 0000:00:13.0: address space collision: [mem
0x3f000000-0x3f00ffff pref] conflicts with 0000:00:12.0 [mem
0x3f000000-0x3f00ffff pref]
[ 1.355653] pci 0000:00:09.0: BAR 9: assigned [mem 0x04000000-0x07ffffff
pref]
[ 1.356740] pci 0000:00:09.0: BAR 10: assigned [mem 0x08000000-0x0bffffff]
[ 1.357787] pci 0000:00:13.0: BAR 6: assigned [mem 0x0c000000-0x0c00ffff
pref]
[ 1.358868] pci 0000:00:09.0: BAR 7: assigned [io 0x1000-0x10ff]
[ 1.360716] pci 0000:00:09.0: BAR 8: assigned [io 0x1400-0x14ff]
[ 1.362579] pci 0000:00:09.0: CardBus bridge to [bus 01-04]
[ 1.364774] pci 0000:00:09.0: bridge window [io 0x1000-0x10ff]
[ 1.366582] pci 0000:00:09.0: bridge window [io 0x1400-0x14ff]
[ 1.368162] pci 0000:00:09.0: bridge window [mem 0x04000000-0x07ffffff
pref]
[ 1.369190] pci 0000:00:09.0: bridge window [mem 0x08000000-0x0bffffff]
[ 1.373745] NET: Registered protocol family 2
[ 1.388674] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 1.389847] TCP bind hash table entries: 512 (order: 0, 4096 bytes)
[ 1.391661] TCP: Hash tables configured (established 512 bind 512)
[ 1.396702] TCP: reno registered
[ 1.398255] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.399166] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.404623] NET: Registered protocol family 1
[ 1.411646] RPC: Registered named UNIX socket transport module.
[ 1.413614] RPC: Registered udp transport module.
[ 1.414970] RPC: Registered tcp transport module.
[ 1.416655] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.421759] Trying to unpack rootfs image as initramfs...
[ 14.117674] Freeing initrd memory: 6300K (c39c9000 - c3ff0000)
[ 14.122728] platform rtc_cmos: registered platform RTC device (no PNP
device found)
[ 14.148817] microcode: AMD CPU family 0x4 not supported
[ 14.232691] NFS: Registering the id_resolver key type
[ 14.234615] Key type id_resolver registered
[ 14.235937] Key type id_legacy registered
[ 14.237634] msgmni has been set to 116
[ 14.269680] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 252)
[ 14.270702] io scheduler noop registered
[ 14.271808] io scheduler deadline registered
[ 14.273710] io scheduler cfq registered (default)
[ 17.266235] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 17.279306] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 17.290399] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
is a 16550A
[ 17.324468] Linux agpgart interface v0.103
[ 17.568301] brd: module loaded
[ 17.598279] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 17.608599] i8042: Can't read CTR while initializing i8042
[ 17.609372] i8042: probe of i8042 failed with error -5
[ 17.634173] mousedev: PS/2 mouse device common for all mice
[ 17.652200] ledtrig-cpu: registered to indicate activity on CPUs
[ 17.662273] hidraw: raw HID events driver (C) Jiri Kosina
[ 17.675141] TCP: cubic registered
[ 17.677140] NET: Registered protocol family 17
[ 17.681160] Key type dns_resolver registered
[ 17.684139] Using IPI No-Shortcut mode
[ 17.709269] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 17.728121] Freeing unused kernel memory: 372K (c1413000 - c1470000)
[ 17.732117] Write protecting the kernel text: 2972k
[ 17.735137] Write protecting the kernel read-only data: 984k
Loading, please wait...
[ 18.765997] udevd[900]: starting version 175
[ 21.589580] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 21.589580] originally by Donald Becker <becker at scyld.com>
[ 21.589580] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 21.736667] natsemi eth0: NatSemi DP8381[56] at 0xa0004000
(0000:00:12.0), 00:00:24:c5:73:30, IRQ 5, port TP.
[ 21.888654] natsemi eth1: NatSemi DP8381[56] at 0xa0005000
(0000:00:13.0), 00:00:24:c5:73:31, IRQ 9, port TP.
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Waiting for root file system ... done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-label/VOYAGE_FS does not exist. Dropping to a shell!
[ 81.197580] usbcore: registered new interface driver usbfs
[ 81.210470] usbcore: registered new interface driver hub
[ 81.222464] usbcore: registered new device driver usb
[ 81.304482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 81.340448] ehci-pci: EHCI PCI platform driver
[ 81.532428] uhci_hcd: USB Universal Host Controller Interface driver
[ 81.668402] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 81.808384] usbcore: registered new interface driver usbhid
[ 81.809824] usbhid: USB HID core driver
BusyBox v1.20.2 (Debian 1:1.20.0-7) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs) cd /dev
(initramfs) ls
block ptys7 tty23 ttyqb
btrfs-control ptys8 tty24 ttyqc
char ptys9 tty25 ttyqd
console ptysa tty26 ttyqe
core ptysb tty27 ttyqf
cpu ptysc tty28 ttyr0
cpu_dma_latency ptysd tty29 ttyr1
fd ptyse tty3 ttyr2
full ptysf tty30 ttyr3
fuse ptyt0 tty31 ttyr4
input ptyt1 tty32 ttyr5
kmem ptyt2 tty33 ttyr6
kmsg ptyt3 tty34 ttyr7
loop-control ptyt4 tty35 ttyr8
mapper ptyt5 tty36 ttyr9
mem ptyt6 tty37 ttyra
network_latency ptyt7 tty38 ttyrb
network_throughput ptyt8 tty39 ttyrc
null ptyt9 tty4 ttyrd
port ptyta tty40 ttyre
ppp ptytb tty41 ttyrf
psaux ptytc tty42 ttys0
ptmx ptytd tty43 ttys1
pts ptyte tty44 ttys2
ptya0 ptytf tty45 ttys3
ptya1 ptyu0 tty46 ttys4
ptya2 ptyu1 tty47 ttys5
ptya3 ptyu2 tty48 ttys6
ptya4 ptyu3 tty49 ttys7
ptya5 ptyu4 tty5 ttys8
ptya6 ptyu5 tty50 ttys9
ptya7 ptyu6 tty51 ttysa
ptya8 ptyu7 tty52 ttysb
ptya9 ptyu8 tty53 ttysc
ptyaa ptyu9 tty54 ttysd
ptyab ptyua tty55 ttyse
ptyac ptyub tty56 ttysf
ptyad ptyuc tty57 ttyt0
ptyae ptyud tty58 ttyt1
ptyaf ptyue tty59 ttyt2
ptyb0 ptyuf tty6 ttyt3
ptyb1 ptyv0 tty60 ttyt4
ptyb2 ptyv1 tty61 ttyt5
ptyb3 ptyv2 tty62 ttyt6
ptyb4 ptyv3 tty63 ttyt7
ptyb5 ptyv4 tty7 ttyt8
ptyb6 ptyv5 tty8 ttyt9
ptyb7 ptyv6 tty9 ttyta
ptyb8 ptyv7 ttyS0 ttytb
ptyb9 ptyv8 ttyS1 ttytc
ptyba ptyv9 ttyS2 ttytd
ptybb ptyva ttyS3 ttyte
ptybc ptyvb ttya0 ttytf
ptybd ptyvc ttya1 ttyu0
ptybe ptyvd ttya2 ttyu1
ptybf ptyve ttya3 ttyu2
ptyc0 ptyvf ttya4 ttyu3
ptyc1 ptyw0 ttya5 ttyu4
ptyc2 ptyw1 ttya6 ttyu5
ptyc3 ptyw2 ttya7 ttyu6
ptyc4 ptyw3 ttya8 ttyu7
ptyc5 ptyw4 ttya9 ttyu8
ptyc6 ptyw5 ttyaa ttyu9
ptyc7 ptyw6 ttyab ttyua
ptyc8 ptyw7 ttyac ttyub
ptyc9 ptyw8 ttyad ttyuc
ptyca ptyw9 ttyae ttyud
ptycb ptywa ttyaf ttyue
ptycc ptywb ttyb0 ttyuf
ptycd ptywc ttyb1 ttyv0
ptyce ptywd ttyb2 ttyv1
ptycf ptywe ttyb3 ttyv2
ptyd0 ptywf ttyb4 ttyv3
ptyd1 ptyx0 ttyb5 ttyv4
ptyd2 ptyx1 ttyb6 ttyv5
ptyd3 ptyx2 ttyb7 ttyv6
ptyd4 ptyx3 ttyb8 ttyv7
ptyd5 ptyx4 ttyb9 ttyv8
ptyd6 ptyx5 ttyba ttyv9
ptyd7 ptyx6 ttybb ttyva
ptyd8 ptyx7 ttybc ttyvb
ptyd9 ptyx8 ttybd ttyvc
ptyda ptyx9 ttybe ttyvd
ptydb ptyxa ttybf ttyve
ptydc ptyxb ttyc0 ttyvf
ptydd ptyxc ttyc1 ttyw0
ptyde ptyxd ttyc2 ttyw1
ptydf ptyxe ttyc3 ttyw2
ptye0 ptyxf ttyc4 ttyw3
ptye1 ptyy0 ttyc5 ttyw4
ptye2 ptyy1 ttyc6 ttyw5
ptye3 ptyy2 ttyc7 ttyw6
ptye4 ptyy3 ttyc8 ttyw7
ptye5 ptyy4 ttyc9 ttyw8
ptye6 ptyy5 ttyca ttyw9
ptye7 ptyy6 ttycb ttywa
ptye8 ptyy7 ttycc ttywb
ptye9 ptyy8 ttycd ttywc
ptyea ptyy9 ttyce ttywd
ptyeb ptyya ttycf ttywe
ptyec ptyyb ttyd0 ttywf
ptyed ptyyc ttyd1 ttyx0
ptyee ptyyd ttyd2 ttyx1
ptyef ptyye ttyd3 ttyx2
ptyp0 ptyyf ttyd4 ttyx3
ptyp1 ptyz0 ttyd5 ttyx4
ptyp2 ptyz1 ttyd6 ttyx5
ptyp3 ptyz2 ttyd7 ttyx6
ptyp4 ptyz3 ttyd8 ttyx7
ptyp5 ptyz4 ttyd9 ttyx8
ptyp6 ptyz5 ttyda ttyx9
ptyp7 ptyz6 ttydb ttyxa
ptyp8 ptyz7 ttydc ttyxb
ptyp9 ptyz8 ttydd ttyxc
ptypa ptyz9 ttyde ttyxd
ptypb ptyza ttydf ttyxe
ptypc ptyzb ttye0 ttyxf
ptypd ptyzc ttye1 ttyy0
ptype ptyzd ttye2 ttyy1
ptypf ptyze ttye3 ttyy2
ptyq0 ptyzf ttye4 ttyy3
ptyq1 ram0 ttye5 ttyy4
ptyq2 ram1 ttye6 ttyy5
ptyq3 ram10 ttye7 ttyy6
ptyq4 ram11 ttye8 ttyy7
ptyq5 ram12 ttye9 ttyy8
ptyq6 ram13 ttyea ttyy9
ptyq7 ram14 ttyeb ttyya
ptyq8 ram15 ttyec ttyyb
ptyq9 ram2 ttyed ttyyc
ptyqa ram3 ttyee ttyyd
ptyqb ram4 ttyef ttyye
ptyqc ram5 ttyp0 ttyyf
ptyqd ram6 ttyp1 ttyz0
ptyqe ram7 ttyp2 ttyz1
ptyqf ram8 ttyp3 ttyz2
ptyr0 ram9 ttyp4 ttyz3
ptyr1 random ttyp5 ttyz4
ptyr2 snapshot ttyp6 ttyz5
ptyr3 stderr ttyp7 ttyz6
ptyr4 stdin ttyp8 ttyz7
ptyr5 stdout ttyp9 ttyz8
ptyr6 tty ttypa ttyz9
ptyr7 tty0 ttypb ttyza
ptyr8 tty1 ttypc ttyzb
ptyr9 tty10 ttypd ttyzc
ptyra tty11 ttype ttyzd
ptyrb tty12 ttypf ttyze
ptyrc tty13 ttyq0 ttyzf
ptyrd tty14 ttyq1 urandom
ptyre tty15 ttyq2 vcs
ptyrf tty16 ttyq3 vcs1
ptys0 tty17 ttyq4 vcsa
ptys1 tty18 ttyq5 vcsa1
ptys2 tty19 ttyq6 vga_arbiter
ptys3 tty2 ttyq7 zero
ptys4 tty20 ttyq8
ptys5 tty21 ttyq9
ptys6 tty22 ttyqa
(initramfs) cat /rpc/partitions
cat: can't open '/rpc/partitions': No such file or directory
(initramfs) cat /proc/partitions
major minor #blocks name
(initramfs)
More information about the Voyage-linux
mailing list