[Voyage-linux] Mubox and i2s

[Kim-man 'Punky' TSE]

On 2/17/2015 9:33 PM, PSL wrote:
>
> Hello - installed Mubox on a Raspberry Pi B+ to which a Soekris DAM1021 DAC is connected via i2s. What do I need to do 
> to Mubox to get the i2S outputs working?
>
> The Raspi and Soekris works fine with Volumio installed on the B+, so I tried the /etc/modules file from the Volumio 
> install in Mubox but no joy. "aplay -l" says 'No sound cards...'
>
> What else do I need to change?
>
Try, please find out does Soekris DAM1021 DAC supports latest raspberry pi kernel (3.18.x+).  In MuBox for RPi, try to 
remove the device tree overlay that is dedicated for Hifiberry DAC+:

# remove the following line.
device_tree_overlay=overlays/hifiberry-dacplus-overlay.dtb

May also you can check what kernel your Volumio is using (uname -a).

Regards,
Punky

-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
   - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)