[Voyage-linux] usb stick as wan

[atux john]

Hi. Sorry i had a typo.
now i can ping from ALIX itself to 8.8.8.8 and www.google.com
when i try from pc which is in eth1 of ALIX, i cannot get anywhere.





On 23/5/2015 15:57, atux john wrote:
> Dear Kim-man,
>
>
> thanks a lot for the quick reply.
> my */etc/network/interfaces* has
>
> *auto wlan0 **
> **iface wlan0 inet static **
> **        address 192.168.0.49 **
> **        netmask 255.255.255.0 **
> **        broadcast 192.168.0.255 **
> **        wpa-ssid "**Com_SAT_PLUS " **
> **        wpa-psk "**wh at t3v3r123 "**
> **        up nat.sh eth1 wlan0  "192.168.1.0/24" **
>
> auto eth1
>   iface eth1 inet static
>   address 192.168.1.100
>   netmask 255.255.255.0
> **
>
>
>
> *then i rebooted the system. from my pc i get connected to eth1 of 
> ALIX. then i try to access the internet without success.
> ping 8.8.8.8, ping www.google.com failed.
> the thing is that i can access the remote router that serves the wifi 
> (192.168.1.1). Also i can get access from my laptop to the internet 
> with these settings.
> the only settings that i have edited was the 
> */etc/network/interfaces*. do i have to alter any other file?
> what am i doing wrong?
>
>
>
> On 23/5/2015 08:54, Kim-man 'Punky' TSE wrote:
>> John,
>>
>> You are lucky, because I have the similar setup, incl WN722N:
>>
>> in /etc/network/interfaces
>>
>> auto wlan0
>> iface wlan0 inet static
>>         address 192.168.0.49
>>         netmask 255.255.255.0
>>         broadcast 192.168.0.255
>>         wpa-ssid <your SSID>
>>         wpa-psk <your PSK>
>>         up nat.sh eth1 wlan0  "192.168.1.0/24"
>>
>> I leave eth1 settings to you.  Also make sure you have 
>> firmware-atheros (non-free) package installed
>>
>> On 5/22/2015 9:22 PM, tux john wrote:
>>> hello everyone. i do have an ALIX 2d13 which has voyage linux 0.9.2 
>>> and a usb stick (TP LINK TL-WN722N).
>>> i do need to setup the wifi usb to be my WAN for access to the 
>>> Internet. Some help with the config please.
>>> _*WIFI settings:*_
>>> SSID:Com_SAT_PLUS
>>> WPA2+
>>> passphrase:wh at t3v3r123
>>> IP:192.168.0.49/24, gateway 192.168.0.1
>>> _*LAN settings:*_
>>> eth1:192.168.1.100/24
>>> All traffic from eth1 will get NAT to wlan interface and then travel 
>>> to the Internet.
>>
>>
>
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20150523/e099dfe1/attachment.html>