[Voyage-linux] IPv6 problem

[Kim-man 'Punky' TSE]

All voyage linux kernel are compiled with limited ipv6 support.  I would suggest you install debian stock kernel for 
full ipv6 at the moment.

Regards,
Punky

On 2/1/2016 12:04 AM, Henrik Kressner wrote:
>
>
>
> On a ALIX with voyage Version: 0.10.0 I have a IPv6 problem.
>
>
> When I write:
>
>
> auto eth1
> iface eth1 inet6 static
>         address 2001:0db8:0:f101::1/64
>
> to /etc/network/interfaces
>
>
> and reboot ifconfig shows this:
>
> eth1      Link encap:Ethernet  HWaddr x
>              inet6 addr: 2001:db8:0:f101::1/64 Scope:Global
>
>
> But if i try to ping myself
>
>
> # ping6 2001:0db8:0:f101::1
> PING 2001:0db8:0:f101::1(2001:db8:0:f101::1) 56 data bytes
>
>
> It just hangs until I press Ctrl C.
>
> The same goes if I use -I eth1 in ping6, but if i down eth1 and write:
>
> # /sbin/ifconfig eth0 inet6 add 2001:0db8:0:f101::1/64
>
> Then up eth1 again, and ping this way:
>
> ping6 2001:0db8:0:f101::1
> PING 2001:0db8:0:f101::1(2001:db8:0:f101::1) 56 data bytes
> 64 bytes from 2001:db8:0:f101::1: icmp_seq=1 ttl=64 time=0.096 ms
> 64 bytes from 2001:db8:0:f101::1: icmp_seq=2 ttl=64 time=0.103 ms
> 64 bytes from 2001:db8:0:f101::1: icmp_seq=3 ttl=64 time=0.103 ms
>
>
> Everythings in order ?
>
>
> What's going on ?

-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
   - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)