[Voyage-linux] iptable_nat

[Teco Boot]

nf_nat and nf_nat_ipv4 is missing.

root at host:~# lsmod | grep nf
nf_nat_masquerade_ipv4     1305  1 ipt_MASQUERADE
nf_conntrack_netlink    19580  0 
nfnetlink               3661  1 nf_conntrack_netlink
nf_nat_ipv4             3539  1 iptable_nat
nf_nat                  8532  3 nf_nat_ipv4,xt_nat,nf_nat_masquerade_ipv4
nf_conntrack_ipv4       8810  89 
nf_defrag_ipv4           999  1 nf_conntrack_ipv4
nf_conntrack           52481  7 nf_nat,nf_nat_ipv4,xt_conntrack,nf_nat_masquerade_ipv4,nf_conntrack_netlink,xt_connmark,nf_conntrack_ipv4
root at host:~# 

I have my own build kernel (4.1.something). What is yours?

Teco



> Op 26 mei 2016, om 12:13 heeft Miroslav Misek <miroslav.misek at netgarden.cz> het volgende geschreven:
> 
> Tried, but without success:
> 
> root at office:~# lsmod
> Module                  Size  Used by
> iptable_filter           992  0
> ip_tables              12581  1 iptable_filter
> xt_tcpudp               2064  0
> nf_conntrack_ipv6       5680  0
> nf_defrag_ipv6         21535  1 nf_conntrack_ipv6
> xt_conntrack            2480  0
> ip6table_filter          944  0
> ip6_tables             12969  1 ip6table_filter
> x_tables               12554  6 ip6table_filter,ip_tables,xt_tcpudp,xt_conntrack,iptable_filter,ip6_tables
> ipv6                  240368  34 nf_defrag_ipv6,nf_conntrack_ipv6
> nf_conntrack_ipv4       9054  0
> nf_defrag_ipv4          1230  1 nf_conntrack_ipv4
> nf_conntrack           59728  3 xt_conntrack,nf_conntrack_ipv4,nf_conntrack_ipv6
> ledtrig_netdev          2816  0
> ledtrig_timer           1248  0
> ledtrig_heartbeat       1288  0
> sp5100_tco              4016  0
> fam15h_power            2144  0
> pcspkr                  1504  0
> k10temp                 2408  0
> i2c_piix4               7376  0
> evdev                   7824  0
> acpi_cpufreq            5232  0
> igb                   113529  0
> i2c_algo_bit            4154  1 igb
> ptp                     8039  1 igb
> mmc_block              21057  2
> crc32c_intel            7360  0
> sdhci_pci               9808  0
> ahci                   23784  0
> sdhci                  20216  1 sdhci_pci
> libahci                17003  1 ahci
> xhci_pci                2832  0
> ehci_pci                3296  0
> xhci_hcd               78733  1 xhci_pci
> ehci_hcd               32229  1 ehci_pci
> mmc_core               71105  3 mmc_block,sdhci,sdhci_pci
> libata                137950  2 ahci,libahci
> usbcore               130000  4 ehci_hcd,ehci_pci,xhci_hcd,xhci_pci
> usb_common              1464  1 usbcore
> pps_core                5105  1 ptp
> 
> root at office:~# iptables -t nat -L
> iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
> Perhaps iptables or your kernel needs to be upgraded.
> 
> Miroslav Misek
> 
> On 25.5.2016 19:33, Teco Boot wrote:
>> Try with nf_conntrack_ipv4 in /etc/modules.
>> 
>> Teco
>> 
>> 
>>> Op 25 mei 2016, om 18:37 heeft Miroslav Misek <miroslav.misek at netgarden.cz> het volgende geschreven:
>>> 
>>> Hi,
>>> 
>>> I am using voyage-linux on APU.2C2.
>>> Installed snapshot amd64 version.
>>> 
>>> I am not able configure nat:
>>> root at office:/etc/ferm# iptables -t nat -L
>>> iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
>>> Perhaps iptables or your kernel needs to be upgraded.
>>> 
>>> Probably it is needed to add it to kernel:
>>> root at office:/etc/ferm# modprobe iptable_nat
>>> modprobe: FATAL: Module iptable_nat not found.
>>> 
>>> or is there any other solution to get NAT working please?
>>> 
>>> Thank you very much,
>>> Miroslav
>>> 
>>> _______________________________________________
>>> Voyage-linux mailing list
>>> Voyage-linux at list.voyage.hk
>>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>