[Voyage-linux] Loud clicks using digital volume control with Raspbian on a Raspberry pi 3 with a DACPLUS PRO

[Kim-man 'Punky' TSE]

Hi Cor,

I suggest re-direct your question to Hifiberry as I also get into this problem.   BTW, I normally disable volume control 
on the DAC and use the amplifier instead.

There is a command in ALSA (but I can't recall which) to reset the card back to default volume level.

Regards,
Punky

On 9/9/2016 4:48 PM, Cor van Zundert wrote:
>
> Dear all,
>
> The DACPLUS PRO DAC offers the option to use the digital volume control of the DAC itself
> instead of using the raspberry volume control.
>
> As the volume control has to be set higher to produce the same amount of volume,
> it looks to me that the sound resolution is a lot better this way.
>
> But … turning up the volume to about 80% also results in extremely loud clicks
>
> heard when playing songs in different resolutions.
>
> This ONLY happens when the mixer_control is set to Digital.
>
> Do you know a solution for this phenomenon ?
>
> Thanks and regards,
>
> Cor van Zundert (The Netherlands)
>
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux


-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
   - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)