[Voyage-linux] Voyage 0.11.0 and APU2 no LEDs

[Kim-man 'Punky' TSE]

Hi Richard,

Please check if leds_apu2 is loaded?  Use command:

lsmod|grep leds

Regards,
Punky


On 6/16/2017 1:06 PM, Richard Warburton wrote:
> Fresh install of Voyage 0.11.0, alas on startup I see the message:
> /etc/init.d/voyage-util: 76: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:1/trigger: Directory nonexistent
> /etc/init.d/voyage-util: 77: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent
> /etc/init.d/voyage-util: 78: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent
> /etc/init.d/voyage-util: 79: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent
>
> Looking inside /sys/class/leds, there's only one directory called mmc0::
>
> Is there a simple fix for this?  I tried the current release as well, but no dice.
>
> Thanks in advance.
>
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux


-- 
Regards,
Kim-man "Punky" Tse

* Open Source Embedded Solutions and Systems
   - Voyage Linux (http://linux.voyage.hk)
   - Voyage MPD   (http://linux.voyage.hk/voyage-mpd)
   - Voyage MuBox (http://mubox.voyage.hk)
* Voyage Store   (http://store.voyage.hk)