<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2722" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hello!</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I recently put Voyage on a wrap board which I put
in use as a router (feed) for a wireless network. The wireless interface
(2511mp) was as a client, using an AP1000 as the broadcast. The device was
doing routing not nat, and the performance (speed/bandwidth) was good, and the
stability was good too.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The problems I had was with arp and/or dhcpd.
I know that it comes with 'dnsmask' installed, but in my testing, a client
behind a CB3 wouldnt get an IP using dnsmask, so I used a statically compiled
dhcpd binary which I had been using in several other places (in wisp-dist) with
great success. Well, it worked, at first... after a day or two dhcpd
would crash, and the only way to make things work "correctly" was
to restart the machine, this was a temprorary solution, as by the next day (or
less) the support calls would return.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I believe the problem is arp, in
that 'arp-a' would show the CB3 mac and not the device behind it (im
convinced it had something to do with this). The CB3s were mostly default
settings (I didnt give any special addresses to them, just left them at default
IP address, 192.168.1.1). If I gave a local (192.168.1.13) secondary
address to the wrap, I could NOT ping 192.168.1.1 at all. In all my
other places 192.168.1.1 would respond, and after replacing the wrap with a
wisp-dist device, it would too.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I was really excited about voyage, as it has
the features I have been wanting in a device, and is tuned to the wrap
boards. But alas I cannot use it if it acts this way. Im really not
sure what the problem is directly, but I am convinced it has something to do
with arp (or lack thereof). </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Has anyone else had issues like
this? I could accept the issues better if this was a big pop,
but there was maybe 10 customers at the most, and it couldnt handle that.
:(</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>any ideas?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Jerryf </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>