### This was tested on voyage-0.2pre1
### You can loggin over network and do the whole stuff below.
### Upgrading ssl, ssh does not cut your connection (at least not mine :-) )
### Of course everytime something can go wrong so it's wise to have a backup of your system !!!
### And be warned: There are only basic modules for wrap without usb etc. etc.
###
### If you use new madwifi driver i.e. 1314 below you must change
### whatever to add wifi0 like
###   wlanconfig ath0 create wlandev wifi0 wlanmode sta

### Install voyage-0.2pre1 as normal
### Boot voyage, set password
### Configure network etc.
### Upload desired packages to voyage system
###

### The follwing must be done on the running voyage system

mkdir /usr/local/archive
### Upload packages to /usr/local/archive in voyage

### Install kernel
cd /
tar zxvf /usr/local/archive/kernel-2.6.12-2-wrap.tgz
### Install modules
cd /lib/modules/
tar zxvf /usr/local/archive/modules-2.6.12-2-wrap.tgz
tar zxvf /usr/local/archive/modules-madwifi-1314-2.6.12-2-wrap.tgz
### Create modules dependencies
depmod -a -F /boot/System.map-2.6.12-2-wrap 2.6.12-2-wrap

### upgrade modules
cd /usr/local/archive
dpkg -i hostapd-1314-0.4.6_bbm.deb wpa_supplicant-1314-0.4.6_bbm.deb wireless_tools-28.pre10_bbm.deb 
dpkg -P madwifi-tools
dpkg -i madwifi-utils-1314_bbm.deb
dpkg -i iproute2-2.6.11-050330_bbm.deb iptables-1.3.3_bbm.deb ssh-4.0p1_bbm.deb ssl-0.9.7g_bbm.deb
### install ssh as suid root (default of voyage) i.e. <yes>
### start sshd i.e. <yes>

### Edit lilo.conf
change
label=Linux
to
label=Linux-old

### add the following lines (at the end)
### You must remove "=bios" if not
### reboot will not work
image=/boot/vmlinuz-2.6.12-2-wrap
        root=/dev/hda1
        label=Linux
        append="console=ttyS0,9600n8"
        read-only

### run lilo
### WARNING: This will overwrite MBR of /dev/hda
lilo

### edit /etc/modules.conf
### insert the following modules
natsemi
scx200_acb
lm77
wd1100 sysctl_wd_graceful=0 sysctl_wd_timeout=30

### reboot
reboot

### If rebooted to a
uname -a
### I hope it rebooted ...
### if you see "Linux voyage 2.6.12-2-wrap ..."
### than you have my running kernel: 
### If system does not but connect rs232 serial cable 
### and have a look at the messages ...


