After upgrading to a new kernel I'm not able to do a modprobe ath_pci
anymore, even though this driver is successfully loaded at boot time. I
have understood that this is because ath_pci is missing in
/lib/modules/2.6.14_my_kernel/modules.pcimap. it is present in
2.6.8-486-voyage/modules.pcimap.<br>
<br>
Have I missed something when upgrading the kernel?<br>
I need to fix this to be able to change country code.<br>
<br>
Thanks in advance<br>
<br>
Nicklas Blidmo<br>
<br>
****** boot messages below ****<br>
<br>
ath_hal: <a href="http://0.9.14.9">0.9.14.9</a> (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413)
<br>
ath_rate_sample:
1.2
<br>
ath_pci: <a href="http://0.9.6.0">0.9.6.0</a>
(EXPERIMENTAL)
<br>
Build date: Dec <br>
Debugging version
(IEEE80211)
<br>
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
54Mbps
<br>
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps
11Mbps
<br>
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps
36M
<br>
bps 48Mbps 54Mbps <br>
ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
54Mbps
<br>
ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
54Mbps
<br>
ath0: H/W encryption support: WEP AES AES_CCM
TKIP
<br>
ath0: mac 5.9 phy 4.3 radio
3.6
<br>
ath0: Use hw queue 1 for WME_AC_BE
traffic
<br>
ath0: Use hw queue 0 for WME_AC_BK
traffic
<br>
ath0: Use hw queue 2 for WME_AC_VI
traffic
<br>
ath0: Use hw queue 3 for WME_AC_VO
traffic
<br>
ath0: Use hw queue 8 for CAB
traffic
<br>
ath0: Use hw queue 9 for
beacons
<br>
Debugging version
(ATH)
<br>
ath0: Atheros 5212: mem=0x80080000,
irq=9
<br>
wlan: <a href="http://0.8.6.0">0.8.6.0</a>
(EXPERIMENTAL)
<br>
wlan: mac acl policy registered <br>