<div>Strange that your USB modules are loading in a different order than mine. On my board, first the EHCI controller is detected and loaded, afterwards the OHCI controller. I'm no expert, but I don't believe that this would be related to the problem.</div>
<div> </div>
<div>What do you have as base addresses for your eth0 & eth1? Is it possible to include a lspci -vv listing?<br></div>
<div>Does anyone know who would be able to lay his technical expert-eye on this matter perhaps?</div>
<div> </div>
<div>Thanks & regards,</div>
<div> </div>
<div>Jarl<br></div>
<div class="gmail_quote">2010/3/18 Teco Boot <span dir="ltr"><<a href="mailto:teco@inf-net.nl" target="_blank">teco@inf-net.nl</a>></span><br>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">I can report similar results, with Sierra MC8700 and Alix6e2 running Voyage 0.6.5.<br>I see it often 5 hours after reboot.<br>
I do not relate this to eth0 (in my case).<br><br>Is the starting order of uhci_hcd and ohci_hcd important?<br>And USB interface number?<br><br>Currently, I use a watchdog script checking ttyUSB0 to ttyUSB3. When mismatch, the box is rebooted.<br>
<br>Regards, Teco<br><br><br><br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.848539] usbcore: registered new interface driver usbfs<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.848884] usbcore: registered new interface driver hub<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.849872] usbcore: registered new device driver usb<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.868521] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.921315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.921764] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after<br>==> Teco: not sure if this is important<br><br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.734496] ohci_hcd 0000:00:0f.4: OHCI Host Controller<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.734910] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.735808] ohci_hcd 0000:00:0f.4: irq 12, io mem 0xefffe000<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.822249] usb usb1: configuration #1 chosen from 1 choice<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.822952] hub 1-0:1.0: USB hub found<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.823794] hub 1-0:1.0: 4 ports detected<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.825827] ehci_hcd 0000:00:0f.5: EHCI Host Controller<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.826884] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 2<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.848873] ehci_hcd 0000:00:0f.5: irq 12, io mem 0xefffd000<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.855783] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.857367] usb usb2: configuration #1 chosen from 1 choice<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.857960] hub 2-0:1.0: USB hub found<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.858795] hub 2-0:1.0: 4 ports detected<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.264802] usb 2-2: new high speed USB device using ehci_hcd and address 3<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.380795] usb 2-2: config 1 has an invalid interface number: 7 but max is 4<br>
==> Teco: not sure if this is important<br><br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.381767] usb 2-2: config 1 has no interface number 2<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.384881] usb 2-2: configuration #1 chosen from 1 choice<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.611789] usb 1-1: new full speed USB device using ohci_hcd and address 2<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.750334] usb 1-1: configuration #1 chosen from 1 choice<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 10.485081] udevd version 125 started<br>
<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.248557] cdc_acm 1-1:1.0: ttyACM0: USB ACM device<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.279579] usbcore: registered new interface driver cdc_acm<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.279781] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters<br>
<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.329245] usbcore: registered new interface driver usbserial<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.329834] USB Serial support registered for generic<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.330982] usbcore: registered new interface driver usbserial_generic<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.331764] usbserial: USB Serial Driver core<br><br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.526539] USB Serial support registered for Sierra USB modem<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.527818] sierra 2-2:1.0: Sierra USB modem converter detected<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.530945] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.532458] usb 2-2: Sierra USB modem converter now attached to ttyUSB0<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.533739] sierra 2-2:1.1: Sierra USB modem converter detected<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.534414] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.535436] usb 2-2: Sierra USB modem converter now attached to ttyUSB1<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.536807] sierra 2-2:1.3: Sierra USB modem converter detected<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.538802] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.540345] usb 2-2: Sierra USB modem converter now attached to ttyUSB2<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.541816] sierra 2-2:1.4: Sierra USB modem converter detected<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.544293] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.545451] usb 2-2: Sierra USB modem converter now attached to ttyUSB3<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.547158] usbcore: registered new interface driver sierra<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.547766] sierra: v.1.7.30:USB Driver for Sierra Wireless USB modems<br><br><br>Jan 1 00:01:35 hgm-57-22 pppd[3378]: pppd 2.4.4 started by root, uid 0<br>Jan 1 00:01:37 hgm-57-22 pppd[3378]: Serial connection established.<br>
Jan 1 00:01:38 hgm-57-22 pppd[3378]: Using interface ppp0<br>Jan 1 00:01:38 hgm-57-22 pppd[3378]: Connect: ppp0 <--> /dev/ttyUSB3<br>Jan 1 00:01:39 hgm-57-22 pppd[3378]: CHAP authentication succeeded<br>Jan 1 00:01:39 hgm-57-22 pppd[3378]: CHAP authentication succeeded<br>
Jan 1 00:01:39 hgm-57-22 vmunix: [ 70.839919] PPP Deflate Compression module registered<br>Jan 1 00:01:42 hgm-57-22 pppd[3378]: Could not determine remote IP address: defaulting to 10.64.64.64<br>Jan 1 00:01:42 hgm-57-22 pppd[3378]: local IP address 89.200.94.41<br>
Jan 1 00:01:42 hgm-57-22 pppd[3378]: remote IP address 10.64.64.64<br>Jan 1 00:01:42 hgm-57-22 pppd[3378]: primary DNS address 62.133.126.28<br>Jan 1 00:01:42 hgm-57-22 pppd[3378]: secondary DNS address 62.133.126.29<br>
<br>==> Teco: Here and messages below, the usb device is resetted, reason unknown<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.735878] usb 2-2: USB disconnect, address 3<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.740222] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0<br>
Jan 1 04:55:33 hgm-57-22 vmunix: [17704.740969] sierra 2-2:1.0: device disconnected<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.743106] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.743916] sierra 2-2:1.1: device disconnected<br>
Jan 1 04:55:33 hgm-57-22 vmunix: [17704.756382] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.756883] sierra 2-2:1.3: device disconnected<br>Jan 1 04:55:33 hgm-57-22 pppd[3378]: Hangup (SIGHUP)<br>
Jan 1 04:55:33 hgm-57-22 pppd[3378]: Modem hangup<br>Jan 1 04:55:33 hgm-57-22 pppd[3378]: Connect time 293.9 minutes.<br>Jan 1 04:55:33 hgm-57-22 pppd[3378]: Sent 1248626 bytes, received 741702 bytes.<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.772457] sierra ttyUSB3: Sierra USB modem converter now disconnected from ttyUSB3<br>
Jan 1 04:55:33 hgm-57-22 vmunix: [17704.772922] sierra 2-2:1.4: device disconnected<br>Jan 1 04:55:33 hgm-57-22 pppd[3378]: Connection terminated.<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17704.982285] usb 2-2: new high speed USB device using ehci_hcd and address 4<br>
Jan 1 04:55:34 hgm-57-22 vmunix: [17705.099394] usb 2-2: config 1 has an invalid interface number: 7 but max is 4<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.100033] usb 2-2: config 1 has no interface number 2<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.103276] usb 2-2: configuration #1 chosen from 1 choice<br>
Jan 1 04:55:34 hgm-57-22 vmunix: [17705.108907] sierra 2-2:1.0: Sierra USB modem converter detected<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.112007] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.113454] usb 2-2: Sierra USB modem converter now attached to ttyUSB0<br>
Jan 1 04:55:34 hgm-57-22 vmunix: [17705.115519] sierra 2-2:1.1: Sierra USB modem converter detected<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.116684] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.117483] usb 2-2: Sierra USB modem converter now attached to ttyUSB1<br>
Jan 1 04:55:34 hgm-57-22 vmunix: [17705.122972] sierra 2-2:1.3: Sierra USB modem converter detected<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.125491] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.126598] usb 2-2: Sierra USB modem converter now attached to ttyUSB4<br>
Jan 1 04:55:34 hgm-57-22 vmunix: [17705.129315] sierra 2-2:1.4: Sierra USB modem converter detected<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.130819] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.132893] usb 2-2: Sierra USB modem converter now attached to ttyUSB5<br>
<br><br>Op 17 mrt 2010, om 23:01 heeft jarl het volgende geschreven:<br>
<div>
<div></div>
<div><br>> Hi all,<br>><br>> I hope that this question hasn't been answered already 10 times, but haven't found any such reference, so I take my chance.<br>><br>> When using Sierra Wireless miniPCI express modules on the Alix board with voyage 0.6.2 or 0.6.5, and only when eth0 is both up and connected, there are constant USB disconnects and reconnects from that module, as in (this is 0.6.5):<br>
><br>> [ 1740.985847] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1<br>> [ 1740.986735] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready<br>> [ 1741.455468] usb 2-2: USB disconnect, address 2<br>> [ 1741.459013] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0<br>
> [ 1741.459925] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1<br>> [ 1741.460938] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2<br>> [ 1741.461478] sierra 2-2:1.0: device disconnected<br>
> [ 1764.881421] usb 2-2: new full speed USB device using ohci_hcd and address 3<br>> [ 1765.020598] usb 2-2: configuration #1 chosen from 1 choice<br>> [ 1765.024616] sierra 2-2:1.0: Sierra USB modem converter detected<br>
> [ 1765.027124] usb 2-2: Sierra USB modem converter now attached to ttyUSB0<br>> [ 1765.028032] usb 2-2: Sierra USB modem converter now attached to ttyUSB1<br>> [ 1765.028945] usb 2-2: Sierra USB modem converter now attached to ttyUSB2<br>
><br>> This is repeated until infinity (or at least that's what I suppose).<br>><br>> I had contact with mr. Dornier from PCEngines, and we concluded that the Ethernet drivers possibly were to be suspected of this behaviour. The reason is that (for 0.6.2 at least), the base addresses found in ifconfig were conflicting with the addresses of other devices on the board. I can provide some documentation, but I'm not aware if it is accepted to attach files here.<br>
><br>> Anyone else having seen such things? I've seen this happening with MC8775 and MC8780 and MC8792V modules, so both voice and non-voice modules.<br>><br>> Thanks for any ideas.<br>><br>> Jarl<br>
</div></div>> _______________________________________________<br>> Voyage-linux mailing list<br>> <a href="mailto:Voyage-linux@list.voyage.hk" target="_blank">Voyage-linux@list.voyage.hk</a><br>> <a href="http://list.voyage.hk/mailman/listinfo/voyage-linux" target="_blank">http://list.voyage.hk/mailman/listinfo/voyage-linux</a><br>
<br></blockquote></div><br>