<html><head></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">Here the ifconfig -a output.<div>Regards, Teco</div><div><br></div><div><div>ath0 Link encap:Ethernet HWaddr 00:15:6d:65:f8:0c </div><div> inet addr:172.31.57.2 Bcast:255.255.255.255 Mask:255.255.0.0</div><div> inet6 addr: fe80::215:6dff:fe65:f80c/64 Scope:Link</div><div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div><div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:5026 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:0 </div><div> RX bytes:0 (0.0 B) TX bytes:452568 (441.9 KiB)</div><div><br></div><div>eth0 Link encap:Ethernet HWaddr 00:0d:b9:1b:54:60 </div><div> inet addr:10.57.2.1 Bcast:255.255.255.255 Mask:255.255.255.128</div><div> inet6 addr: fe80::20d:b9ff:fe1b:5460/64 Scope:Link</div><div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div><div> RX packets:49183 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:40368 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:1000 </div><div> RX bytes:5193050 (4.9 MiB) TX bytes:5089893 (4.8 MiB)</div><div> Interrupt:10 Base address:0xc000 </div><div><br></div><div>eth1 Link encap:Ethernet HWaddr 00:0d:b9:1b:54:61 </div><div> UP BROADCAST MULTICAST MTU:1500 Metric:1</div><div> RX packets:0 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:1000 </div><div> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)</div><div> Interrupt:11 </div><div><br></div><div>lo Link encap:Local Loopback </div><div> inet addr:127.0.0.1 Mask:255.0.0.0</div><div> inet6 addr: ::1/128 Scope:Host</div><div> UP LOOPBACK RUNNING MTU:16436 Metric:1</div><div> RX packets:284 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:284 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:0 </div><div> RX bytes:22215 (21.6 KiB) TX bytes:22215 (21.6 KiB)</div><div><br></div><div>ppp0 Link encap:Point-to-Point Protocol </div><div> inet addr: skipped P-t-P:10.64.64.64 Mask:255.255.255.255</div><div> UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1</div><div> RX packets:14973 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:24825 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:3 </div><div> RX bytes:2048832 (1.9 MiB) TX bytes:2930188 (2.7 MiB)</div><div><br></div><div>wifi0 Link encap:UNSPEC HWaddr 00-15-6D-65-F8-0C-61-74-00-00-00-00-00-00-00-00 </div><div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div><div> RX packets:537883 errors:0 dropped:0 overruns:0 frame:215826</div><div> TX packets:5026 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:199 </div><div> RX bytes:55696911 (53.1 MiB) TX bytes:563140 (549.9 KiB)</div><div> Interrupt:9 </div></div><div><br></div><div><br></div><div><br><div><div>Op 20 mrt 2010, om 14:03 heeft jarl het volgende geschreven:</div><br class="Apple-interchange-newline"><blockquote type="cite">Hi,<br><br>Could you also send a dump of your ifconfig -a ?<br>Kind regards,<br><br>Jarl<br><br><div class="gmail_quote">2010/3/19 Teco Boot <span dir="ltr"><<a href="mailto:teco@inf-net.nl">teco@inf-net.nl</a>></span><br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;"><div style="word-wrap: break-word;">Here my lspci output<div>Regards, Teco</div><div><br></div>
<div><div>hgm-57-11:~# lspci -vv</div><div>00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 33)</div><div><span style="white-space: pre;"> </span>Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge</div>
<div><span style="white-space: pre;"> </span>Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-</div><div><span style="white-space: pre;"> </span>Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-</div>
<div><span style="white-space: pre;"> </span>Latency: 248, Cache Line Size: 32 bytes</div><div><span style="white-space: pre;"> </span>Region 0: I/O ports at ac1c [size=4]</div><div><br></div><div>00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block</div>
<div><span style="white-space: pre;"> </span>Subsystem: Advanced Micro Devices [AMD] Geode LX AES Security Block</div><div><span style="white-space: pre;"> </span>Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-</div>
<div><span style="white-space: pre;"> </span>Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-</div><div><span style="white-space: pre;"> </span>Latency: 0, Cache Line Size: 32 bytes</div>
<div><span style="white-space: pre;"> </span>Interrupt: pin A routed to IRQ 9</div><div><span style="white-space: pre;"> </span>Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K]</div><div><span style="white-space: pre;"> </span>Kernel driver in use: Geode LX AES</div>
<div><span style="white-space: pre;"> </span>Kernel modules: geode-rng, geode-aes</div><div><br></div><div>00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)</div><div><span style="white-space: pre;"> </span>Subsystem: VIA Technologies, Inc. Device 0106</div>
<div><span style="white-space: pre;"> </span>Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-</div><div><span style="white-space: pre;"> </span>Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-</div>
<div><span style="white-space: pre;"> </span>Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes</div><div><span style="white-space: pre;"> </span>Interrupt: pin A routed to IRQ 10</div><div><span style="white-space: pre;"> </span>Region 0: I/O ports at 1000 [size=256]</div>
<div><span style="white-space: pre;"> </span>Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=256]</div><div><span style="white-space: pre;"> </span>Capabilities: [40] Power Management version 2</div><div><span style="white-space: pre;"> </span>Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)</div>
<div><span style="white-space: pre;"> </span>Status: D0 PME-Enable- DSel=0 DScale=0 PME-</div><div><span style="white-space: pre;"> </span>Kernel driver in use: via-rhine</div><div><span style="white-space: pre;"> </span>Kernel modules: via-rhine</div>
<div><br></div><div>00:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)</div><div><span style="white-space: pre;"> </span>Subsystem: VIA Technologies, Inc. Device 0106</div><div><span style="white-space: pre;"> </span>Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-</div>
<div><span style="white-space: pre;"> </span>Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-</div><div><span style="white-space: pre;"> </span>Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes</div>
<div><span style="white-space: pre;"> </span>Interrupt: pin A routed to IRQ 11</div><div><span style="white-space: pre;"> </span>Region 0: I/O ports at 1400 [size=256]</div><div><span style="white-space: pre;"> </span>Region 1: Memory at e0040000 (32-bit, non-prefetchable) [size=256]</div>
<div><span style="white-space: pre;"> </span>Capabilities: [40] Power Management version 2</div><div><span style="white-space: pre;"> </span>Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)</div>
<div><span style="white-space: pre;"> </span>Status: D0 PME-Enable- DSel=0 DScale=0 PME-</div><div><span style="white-space: pre;"> </span>Kernel driver in use: via-rhine</div><div><span style="white-space: pre;"> </span>Kernel modules: via-rhine</div>
<div><br></div><div>00:0c.0 Ethernet controller: Atheros Communications Inc. AR5413 802.11abg NIC (rev 01)</div><div><span style="white-space: pre;"> </span>Subsystem: Device 0777:3002</div><div><span style="white-space: pre;"> </span>Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-</div>
<div><span style="white-space: pre;"> </span>Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-</div><div><span style="white-space: pre;"> </span>Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes</div>
<div><span style="white-space: pre;"> </span>Interrupt: pin A routed to IRQ 9</div><div><span style="white-space: pre;"> </span>Region 0: Memory at e0080000 (32-bit, non-prefetchable) [size=64K]</div><div><span style="white-space: pre;"> </span>Capabilities: [44] Power Management version 2</div>
<div><span style="white-space: pre;"> </span>Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)</div><div><span style="white-space: pre;"> </span>Status: D0 PME-Enable- DSel=0 DScale=2 PME-</div>
<div><span style="white-space: pre;"> </span>Kernel driver in use: ath_pci</div><div><span style="white-space: pre;"> </span>Kernel modules: ath5k, ath_pci</div><div><br></div><div>00:0f.0 ISA bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA (rev 03)</div>
<div><span style="white-space: pre;"> </span>Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA</div><div><span style="white-space: pre;"> </span>Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-</div>
<div><span style="white-space: pre;"> </span>Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-</div><div><span style="white-space: pre;"> </span>Region 0: I/O ports at 6000 [size=8]</div>
<div><span style="white-space: pre;"> </span>Region 1: I/O ports at 6100 [size=256]</div><div><span style="white-space: pre;"> </span>Region 2: I/O ports at 6200 [size=64]</div><div><span style="white-space: pre;"> </span>Region 3: I/O ports at <unassigned></div>
<div><span style="white-space: pre;"> </span>Region 4: I/O ports at 9d00 [size=128]</div><div><span style="white-space: pre;"> </span>Region 5: I/O ports at 9c00 [size=64]</div><div><span style="white-space: pre;"> </span>Kernel modules: cs5535_gpio</div>
<div><br></div><div>00:0f.2 IDE interface: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE (rev 01) (prog-if 80 [Master])</div><div><span style="white-space: pre;"> </span>Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE</div>
<div><span style="white-space: pre;"> </span>Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-</div><div><span style="white-space: pre;"> </span>Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-</div>
<div><span style="white-space: pre;"> </span>Latency: 248, Cache Line Size: 32 bytes</div><div><span style="white-space: pre;"> </span>Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]</div>
<div><span style="white-space: pre;"> </span>Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]</div><div><span style="white-space: pre;"> </span>Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]</div>
<div><span style="white-space: pre;"> </span>Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]</div><div><span style="white-space: pre;"> </span>Region 4: I/O ports at ff00 [size=16]</div>
<div><span style="white-space: pre;"> </span>Kernel driver in use: AMD_IDE</div><div><span style="white-space: pre;"> </span>Kernel modules: amd74xx, cs5536</div><div><br></div><div>00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02) (prog-if 10 [OHCI])</div>
<div><span style="white-space: pre;"> </span>Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC</div><div><span style="white-space: pre;"> </span>Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-</div>
<div><span style="white-space: pre;"> </span>Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-</div><div><span style="white-space: pre;"> </span>Latency: 0, Cache Line Size: 32 bytes</div>
<div><span style="white-space: pre;"> </span>Interrupt: pin D routed to IRQ 12</div><div><span style="white-space: pre;"> </span>Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K]</div><div><span style="white-space: pre;"> </span>Capabilities: [40] Power Management version 2</div>
<div><span style="white-space: pre;"> </span>Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)</div><div><span style="white-space: pre;"> </span>Status: D0 PME-Enable- DSel=0 DScale=0 PME-</div>
<div><span style="white-space: pre;"> </span>Kernel driver in use: ohci_hcd</div><div><span style="white-space: pre;"> </span>Kernel modules: ohci-hcd</div><div><br></div><div>00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02) (prog-if 20 [EHCI])</div>
<div><span style="white-space: pre;"> </span>Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC</div><div><span style="white-space: pre;"> </span>Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-</div>
<div><span style="white-space: pre;"> </span>Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-</div><div><span style="white-space: pre;"> </span>Latency: 0, Cache Line Size: 32 bytes</div>
<div><span style="white-space: pre;"> </span>Interrupt: pin D routed to IRQ 12</div><div><span style="white-space: pre;"> </span>Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K]</div><div><span style="white-space: pre;"> </span>Capabilities: [40] Power Management version 2</div>
<div><span style="white-space: pre;"> </span>Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)</div><div><span style="white-space: pre;"> </span>Status: D0 PME-Enable- DSel=0 DScale=0 PME-</div>
<div><span style="white-space: pre;"> </span>Kernel driver in use: ehci_hcd</div><div><span style="white-space: pre;"> </span>Kernel modules: ehci-hcd</div><div><br></div><div>hgm-57-11:~# </div><div><br></div></div><div>
<br></div><div><br><div><div>Op 18 mrt 2010, om 22:18 heeft jarl het volgende geschreven:</div><div><div></div><div class="h5"><br><blockquote type="cite"><div>Strange that your USB modules are loading in a different order than mine. On my board, first the EHCI controller is detected and loaded, afterwards the OHCI controller. I'm no expert, but I don't believe that this would be related to the problem.</div>
<div> </div>
<div>What do you have as base addresses for your eth0 & eth1? Is it possible to include a lspci -vv listing?<br></div>
<div>Does anyone know who would be able to lay his technical expert-eye on this matter perhaps?</div>
<div> </div>
<div>Thanks & regards,</div>
<div> </div>
<div>Jarl<br></div>
<div class="gmail_quote">2010/3/18 Teco Boot <span dir="ltr"><<a href="mailto:teco@inf-net.nl" target="_blank">teco@inf-net.nl</a>></span><br>
<blockquote class="gmail_quote" style="padding-left: 1ex; margin: 0px 0px 0px 0.8ex; border-left: 1px solid rgb(204, 204, 204);">I can report similar results, with Sierra MC8700 and Alix6e2 running Voyage 0.6.5.<br>I see it often 5 hours after reboot.<br>
I do not relate this to eth0 (in my case).<br><br>Is the starting order of uhci_hcd and ohci_hcd important?<br>And USB interface number?<br><br>Currently, I use a watchdog script checking ttyUSB0 to ttyUSB3. When mismatch, the box is rebooted.<br>
<br>Regards, Teco<br><br><br><br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.848539] usbcore: registered new interface driver usbfs<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.848884] usbcore: registered new interface driver hub<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.849872] usbcore: registered new device driver usb<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.868521] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.921315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 6.921764] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after<br>==> Teco: not sure if this is important<br><br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.734496] ohci_hcd 0000:00:0f.4: OHCI Host Controller<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.734910] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.735808] ohci_hcd 0000:00:0f.4: irq 12, io mem 0xefffe000<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.822249] usb usb1: configuration #1 chosen from 1 choice<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.822952] hub 1-0:1.0: USB hub found<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.823794] hub 1-0:1.0: 4 ports detected<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.825827] ehci_hcd 0000:00:0f.5: EHCI Host Controller<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.826884] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 2<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.848873] ehci_hcd 0000:00:0f.5: irq 12, io mem 0xefffd000<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.855783] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.857367] usb usb2: configuration #1 chosen from 1 choice<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.857960] hub 2-0:1.0: USB hub found<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 7.858795] hub 2-0:1.0: 4 ports detected<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.264802] usb 2-2: new high speed USB device using ehci_hcd and address 3<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.380795] usb 2-2: config 1 has an invalid interface number: 7 but max is 4<br>
==> Teco: not sure if this is important<br><br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.381767] usb 2-2: config 1 has no interface number 2<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.384881] usb 2-2: configuration #1 chosen from 1 choice<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.611789] usb 1-1: new full speed USB device using ohci_hcd and address 2<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 8.750334] usb 1-1: configuration #1 chosen from 1 choice<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 10.485081] udevd version 125 started<br>
<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.248557] cdc_acm 1-1:1.0: ttyACM0: USB ACM device<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.279579] usbcore: registered new interface driver cdc_acm<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.279781] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters<br>
<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.329245] usbcore: registered new interface driver usbserial<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.329834] USB Serial support registered for generic<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.330982] usbcore: registered new interface driver usbserial_generic<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.331764] usbserial: USB Serial Driver core<br><br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.526539] USB Serial support registered for Sierra USB modem<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.527818] sierra 2-2:1.0: Sierra USB modem converter detected<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.530945] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.532458] usb 2-2: Sierra USB modem converter now attached to ttyUSB0<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.533739] sierra 2-2:1.1: Sierra USB modem converter detected<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.534414] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.535436] usb 2-2: Sierra USB modem converter now attached to ttyUSB1<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.536807] sierra 2-2:1.3: Sierra USB modem converter detected<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.538802] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.540345] usb 2-2: Sierra USB modem converter now attached to ttyUSB2<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.541816] sierra 2-2:1.4: Sierra USB modem converter detected<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.544293] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.545451] usb 2-2: Sierra USB modem converter now attached to ttyUSB3<br>Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.547158] usbcore: registered new interface driver sierra<br>
Jan 1 00:01:28 hgm-57-22 vmunix: [ 18.547766] sierra: v.1.7.30:USB Driver for Sierra Wireless USB modems<br><br><br>Jan 1 00:01:35 hgm-57-22 pppd[3378]: pppd 2.4.4 started by root, uid 0<br>Jan 1 00:01:37 hgm-57-22 pppd[3378]: Serial connection established.<br>
Jan 1 00:01:38 hgm-57-22 pppd[3378]: Using interface ppp0<br>Jan 1 00:01:38 hgm-57-22 pppd[3378]: Connect: ppp0 <--> /dev/ttyUSB3<br>Jan 1 00:01:39 hgm-57-22 pppd[3378]: CHAP authentication succeeded<br>Jan 1 00:01:39 hgm-57-22 pppd[3378]: CHAP authentication succeeded<br>
Jan 1 00:01:39 hgm-57-22 vmunix: [ 70.839919] PPP Deflate Compression module registered<br>Jan 1 00:01:42 hgm-57-22 pppd[3378]: Could not determine remote IP address: defaulting to 10.64.64.64<br>Jan 1 00:01:42 hgm-57-22 pppd[3378]: local IP address 89.200.94.41<br>
Jan 1 00:01:42 hgm-57-22 pppd[3378]: remote IP address 10.64.64.64<br>Jan 1 00:01:42 hgm-57-22 pppd[3378]: primary DNS address 62.133.126.28<br>Jan 1 00:01:42 hgm-57-22 pppd[3378]: secondary DNS address 62.133.126.29<br>
<br>==> Teco: Here and messages below, the usb device is resetted, reason unknown<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.735878] usb 2-2: USB disconnect, address 3<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.740222] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0<br>
Jan 1 04:55:33 hgm-57-22 vmunix: [17704.740969] sierra 2-2:1.0: device disconnected<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.743106] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.743916] sierra 2-2:1.1: device disconnected<br>
Jan 1 04:55:33 hgm-57-22 vmunix: [17704.756382] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.756883] sierra 2-2:1.3: device disconnected<br>Jan 1 04:55:33 hgm-57-22 pppd[3378]: Hangup (SIGHUP)<br>
Jan 1 04:55:33 hgm-57-22 pppd[3378]: Modem hangup<br>Jan 1 04:55:33 hgm-57-22 pppd[3378]: Connect time 293.9 minutes.<br>Jan 1 04:55:33 hgm-57-22 pppd[3378]: Sent 1248626 bytes, received 741702 bytes.<br>Jan 1 04:55:33 hgm-57-22 vmunix: [17704.772457] sierra ttyUSB3: Sierra USB modem converter now disconnected from ttyUSB3<br>
Jan 1 04:55:33 hgm-57-22 vmunix: [17704.772922] sierra 2-2:1.4: device disconnected<br>Jan 1 04:55:33 hgm-57-22 pppd[3378]: Connection terminated.<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17704.982285] usb 2-2: new high speed USB device using ehci_hcd and address 4<br>
Jan 1 04:55:34 hgm-57-22 vmunix: [17705.099394] usb 2-2: config 1 has an invalid interface number: 7 but max is 4<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.100033] usb 2-2: config 1 has no interface number 2<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.103276] usb 2-2: configuration #1 chosen from 1 choice<br>
Jan 1 04:55:34 hgm-57-22 vmunix: [17705.108907] sierra 2-2:1.0: Sierra USB modem converter detected<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.112007] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.113454] usb 2-2: Sierra USB modem converter now attached to ttyUSB0<br>
Jan 1 04:55:34 hgm-57-22 vmunix: [17705.115519] sierra 2-2:1.1: Sierra USB modem converter detected<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.116684] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.117483] usb 2-2: Sierra USB modem converter now attached to ttyUSB1<br>
Jan 1 04:55:34 hgm-57-22 vmunix: [17705.122972] sierra 2-2:1.3: Sierra USB modem converter detected<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.125491] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.126598] usb 2-2: Sierra USB modem converter now attached to ttyUSB4<br>
Jan 1 04:55:34 hgm-57-22 vmunix: [17705.129315] sierra 2-2:1.4: Sierra USB modem converter detected<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.130819] usb 2-2: APM supported, enabling autosuspend.<br>Jan 1 04:55:34 hgm-57-22 vmunix: [17705.132893] usb 2-2: Sierra USB modem converter now attached to ttyUSB5<br>
<br><br>Op 17 mrt 2010, om 23:01 heeft jarl het volgende geschreven:<br>
<div>
<div></div>
<div><br>> Hi all,<br>><br>> I hope that this question hasn't been answered already 10 times, but haven't found any such reference, so I take my chance.<br>><br>> When using Sierra Wireless miniPCI express modules on the Alix board with voyage 0.6.2 or 0.6.5, and only when eth0 is both up and connected, there are constant USB disconnects and reconnects from that module, as in (this is 0.6.5):<br>
><br>> [ 1740.985847] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1<br>> [ 1740.986735] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready<br>> [ 1741.455468] usb 2-2: USB disconnect, address 2<br>> [ 1741.459013] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0<br>
> [ 1741.459925] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1<br>> [ 1741.460938] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2<br>> [ 1741.461478] sierra 2-2:1.0: device disconnected<br>
> [ 1764.881421] usb 2-2: new full speed USB device using ohci_hcd and address 3<br>> [ 1765.020598] usb 2-2: configuration #1 chosen from 1 choice<br>> [ 1765.024616] sierra 2-2:1.0: Sierra USB modem converter detected<br>
> [ 1765.027124] usb 2-2: Sierra USB modem converter now attached to ttyUSB0<br>> [ 1765.028032] usb 2-2: Sierra USB modem converter now attached to ttyUSB1<br>> [ 1765.028945] usb 2-2: Sierra USB modem converter now attached to ttyUSB2<br>
><br>> This is repeated until infinity (or at least that's what I suppose).<br>><br>> I had contact with mr. Dornier from PCEngines, and we concluded that the Ethernet drivers possibly were to be suspected of this behaviour. The reason is that (for 0.6.2 at least), the base addresses found in ifconfig were conflicting with the addresses of other devices on the board. I can provide some documentation, but I'm not aware if it is accepted to attach files here.<br>
><br>> Anyone else having seen such things? I've seen this happening with MC8775 and MC8780 and MC8792V modules, so both voice and non-voice modules.<br>><br>> Thanks for any ideas.<br>><br>> Jarl<br>
</div></div>> _______________________________________________<br>> Voyage-linux mailing list<br>> <a href="mailto:Voyage-linux@list.voyage.hk" target="_blank">Voyage-linux@list.voyage.hk</a><br>> <a href="http://list.voyage.hk/mailman/listinfo/voyage-linux" target="_blank">http://list.voyage.hk/mailman/listinfo/voyage-linux</a><br>
<br></blockquote></div><br>
</blockquote></div></div></div><br></div></div></blockquote></div><br>
</blockquote></div><br></div></body></html>