<div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><br><br></blockquote><div><br></div><div>Take a look at /etc/udev/rules.d/70-persistent-net.rules</div>
<div><br></div><div>You will find a couple lines for the old ethernet adapters, just delete them all and reboot.  You will be back to eth0 and eth1.</div><div><br></div><div>Dean </div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">

------------------------------<br>
<br>
Message: 3<br>
Date: Sat, 05 Feb 2011 13:38:02 -0700<br>
From: Mike Galusha <<a href="mailto:mikegalusha@fastmail.fm">mikegalusha@fastmail.fm</a>><br>
Subject: [Voyage-linux] Alix/Voyage ethernet behavior<br>
To: <a href="mailto:voyage-linux@voyage.hk">voyage-linux@voyage.hk</a><br>
Message-ID: <<a href="mailto:4D4DB52A.6050308@fastmail.fm">4D4DB52A.6050308@fastmail.fm</a>><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
I'm pretty new when it comes to using Voyage with an Alix board but I<br>
thought I'd share something that I experienced that perhaps someone can<br>
explain to me as I'm not a Linux guru and know enough to be dangerous. :)<br>
<br>
A friend recently lent me his Alix box running Voyage MPD to try out and<br>
asked that I create a new image on my own CF card so as not to alter his<br>
network settings. This was not a problem and it worked as expected<br>
including mounting an SMB share on a Windows box where my music files<br>
currently live. Everything worked great and I promptly ordered up an<br>
Alix board and case.<br>
<br>
My surprise came when I put my existing CF card in the new board and<br>
powered it up. Logging into the router I didn't see it getting a dhcp<br>
address. Thinking perhaps I'd gotten a bad board I dug through my old<br>
stuff and came up with a couple of 9 pin serial cables and spliced them<br>
together this morning to make a null modem cable so I could see if it<br>
was alive or dead. The good news is that it was booting up just fine but<br>
I noticed in the console messages that it was renaming eth0 to eth3 and<br>
eth1 to eth2 and when it tried to start eth0 and get a dhcp address, it<br>
received a device not found error since eth0 no longer existed. I was<br>
able to edit /etc/network/interfaces and change eth0 to eth3 and it<br>
happily picked up an address which I then reserved in my dhcp server.<br>
Everything works fine but I'm curious as why this happened.<br>
<br>
My guess is that when I used the CF image on the other Alix board it<br>
recorded the MAC addresses of the ports and it's reassigning these so<br>
there is no conflict. This is a total guess as I don't know enough about<br>
Linux to know but it was the only thing I could think of that made sense.<br>
<br>
Any thoughts would be welcome so I can further my understanding.<br>
<br>
Thanks,<br>
<br>
Mike G.<br>
<br><br></blockquote></div>