Hi,<br><br>I am trying to setup a serial remote with my voyage mpd running on alix 1c. I have a packard bell remote. It used to work with Voyage 0.6.5. But for some reason I couldn't make it work. <br><br>root@voyage:~# dmesg | grep lirc<br>

[   26.449832] lirc_dev: IR Remote Control driver registered, major 61<br>[   27.320112] lirc_serial: auto-detected active high receiver<br>[   27.320207] lirc_dev: lirc_register_plugin: sample_rate: 0<br><br><br>I see /dev/lirc0 registers<br>

<br>root@voyage:/etc/lirc# ls -l /dev/lirc0<br>crw-rw---- 1 root video 61, 0 Feb 13 12:53 /dev/lirc0<br><br><br>When I run <br><br>root@voyage:~# /usr/sbin/lircd -n -d=/dev/lirc0 /etc/lirc/lircd.conf<br><br>root@voyage:~# irw<br>

<br>on two different ssh session, I see the following message <br><br>lircd-0.8.7-pre3[2326]: accepted new client on /var/run/lirc/lircd<br>lircd-0.8.7-pre3[2326]: could not get file information for =/dev/lirc0<br>lircd-0.8.7-pre3[2326]: default_init(): No such file or directory<br>

lircd-0.8.7-pre3[2326]: Failed to initialize hardware<br><br>Any help will be appreciated....<br clear="all"><br>-- <br>Thanks<br>Navas<br>