<div class="gmail_quote">2011/9/19 Gustin Johnson <span dir="ltr"><<a href="mailto:gustin@meganerd.ca">gustin@meganerd.ca</a>></span><br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
It does not use the whole range because the gateway (it's own) IP has<br>
to be outside that range.  Unless of course the netmask is 255.255.0.0<br>
then perhaps it does use all of 192.168.1.XXX.  It is probably a good<br>
idea to confirm the actual DHCP range as well as the netmask.<br>
<br>
You can also configure the /etc/network/interfaces by pulling the CF<br>
card and mounting it on another machine (likely the one you used to<br>
install to the CF card in the first place).<br>
<br>
Did you say your serial console was crashing?<br>
<div><div></div><div class="h5"><br></div></div></blockquote><div><br><br>consider that my problem of "add route.." was solved by using the correct IP of my gateway, finnally it was a banal typo of mine..<br>then, DHCP space ranges from 192.168.1.2 to 192.168.1.254 , and netmask is 255.255.255.0<br>
<br>i'm not using Alix or similar but a AMD E-350 Mini-ITX MoBo from Asus,<br>no serial here (except considering usb-rs232 converters or keyboard ps/2 input)<br>video console is crashing (i'm talking about in these days on mail list)<br>
<br>tried to "save" eth0 connection while "working" on wlan0,<br>but dramaticaly failed :-( found somehow working solution, solved.. until video consolle wake-up :-)<br><br>regards,<br>marco<br></div></div>