comBIOS ver. 1.33 20070103 Copyright (C) 2000-2007 Soekris Engineering. net5501 CPU Geode LX 500 Mhz 0000 Mbyte Memory 0016 0032 0048 0064 0080 0096 0112 0128 0144 0160 0176 0192 0208 0224 0240 0256 0272 0288 0304 0320 0336 0352 0368 0384 0400 0416 0432 0448 0464 0480 0496 0512 0512 Pri Mas SanDisk SDCFH-004G LBA Xlt 968-128-63 3906 Mbyte Pri Sla LaCie d2Next-Quadra LBA Xlt 1024-255-63 134 Gbyte Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int ------------------------------------------------------------------- 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0005000 00000000 15 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0006000 00000000 15 Seconds to automatic boot. Press Ctrl-P for entering Monitor. 10 9 8 7 6 5 4 3 2 1 GRUB Loading stage2...  GNU GRUB version 0.97 (639K lower / 523264K upper memory) +-------------------------------------------------------------------------+||||||||||||||||||||||||+-------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line.  voyage-linux-31Aug11  voyage-custom  Debian GNU/Linux, kernel 2.6.38-voyage-custom-v1.0b4  Debian GNU/Linux, kernel 2.6.38-voyage-custom-v1.0b4 (single-user mod>  Debian GNU/Linux, kernel 2.6.38-voyage  Debian GNU/Linux, kernel 2.6.38-voyage (single-user mode)         The highlighted entry will be booted automatically in 5 seconds.  The highlighted entry will be booted automatically in 4 seconds.  The highlighted entry will be booted automatically in 3 seconds.  The highlighted entry will be booted automatically in 2 seconds.  The highlighted entry will be booted automatically in 1 seconds.  Booting 'voyage-custom' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz.old root=LABEL=ROOT_FS console=ttyS0,19200n8 [Linux-bzImage, setup=0x3400, size=0x1c4830] initrd /initrd.img.old [Linux-initrd @ 0x1fca6000, 0x349190 bytes] [ 0.000000] Linux version 2.6.38-voyage-custom-v1.0b4 (2.6.38-5) (root@MusLin) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Wed Aug 31 13:12:10 CEST 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x100000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000 [ 0.000000] RAMDISK: 1fca6000 - 1fff0000 [ 0.000000] ACPI Error: A valid RSDP was not found (20110112/tbxfroot-219) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 512MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 20000000 [ 0.000000] low ram: 0 - 20000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00020000 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] Using APIC driver default [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] No local APIC present or hardware disabled [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dff00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @df400000 s24384 r0 d20672 u4194304 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935 [ 0.000000] Kernel command line: root=LABEL=ROOT_FS console=ttyS0,19200n8 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 511600k/524288k available (2653k kernel code, 12236k reserved, 1097k data, 336k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] .init : 0xc13aa000 - 0xc13fe000 ( 336 kB) [ 0.000000] .data : 0xc1297698 - 0xc13a9dc0 (1097 kB) [ 0.000000] .text : 0xc1000000 - 0xc1297698 (2653 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:512 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 499.890 MHz processor. [ 0.003008] Calibrating delay loop (skipped), value calculated using timer frequency.. 999.78 BogoMIPS (lpj=499890) [ 0.005012] pid_max: default: 32768 minimum: 301 [ 0.006378] Mount-cache hash table entries: 512 [ 0.008349] SMP alternatives: switching to UP code [ 0.016708] Freeing SMP alternatives: 16k freed [ 0.018083] weird, boot CPU (#0) not listed by the BIOS. [ 0.019011] SMP motherboard not detected. [ 0.020012] Local APIC not detected. Using dummy APIC emulation. [ 0.021007] SMP disabled [ 0.022010] Performance Events: no PMU driver, software events only. [ 0.027029] Brought up 1 CPUs [ 0.028014] Total of 1 processors activated (999.78 BogoMIPS). [ 0.030272] devtmpfs: initialized [ 0.032918] NET: Registered protocol family 16 [ 0.037163] PCI: PCI BIOS revision 2.01 entry at 0xfac61, last bus=0 [ 0.038017] PCI: Using configuration type 1 for base access [ 0.054689] bio: create slab at 0 [ 0.056427] ACPI: Interpreter disabled. [ 0.058131] vgaarb: loaded [ 0.060338] SCSI subsystem initialized [ 0.062699] PCI: Probing PCI hardware [ 0.068329] pci 0000:00:14.0: CS5536 ISA bridge bug detected (incorrect header); workaround applied. [ 0.078533] Switching to clocksource pit [ 0.079528] pnp: PnP ACPI: disabled [ 0.106077] NET: Registered protocol family 2 [ 0.107755] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.110112] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.111815] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.112860] TCP: Hash tables configured (established 16384 bind 16384) [ 0.112983] TCP reno registered [ 0.114814] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.115828] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.117244] NET: Registered protocol family 1 [ 0.118973] RPC: Registered udp transport module. [ 0.120192] RPC: Registered tcp transport module. [ 0.121394] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.122510] Trying to unpack rootfs image as initramfs... [ 0.865269] Freeing initrd memory: 3368k freed [ 0.870937] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.874509] microcode: microcode: CPU0: AMD CPU family 0x5 not supported [ 0.876134] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.881092] msgmni has been set to 1005 [ 0.883655] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.884036] io scheduler noop registered [ 0.885596] io scheduler deadline registered [ 0.886263] io scheduler cfq registered (default) [ 1.202642] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled ΓΏ[ 1.447987] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.699951] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.714744] Linux agpgart interface v0.103 [ 1.731427] brd: module loaded [ 1.731806] Uniform Multi-Platform E-IDE driver [ 1.733428] ide-gd driver 1.18 [ 1.735223] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.871681] Switching to clocksource tsc [ 1.987970] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.019211] mousedev: PS/2 mouse device common for all mice [ 2.053262] cpuidle: using governor ladder [ 2.077969] cpuidle: using governor menu [ 2.104080] TCP cubic registered [ 2.123464] NET: Registered protocol family 17 [ 2.150184] Registering the dns_resolver key type [ 2.178468] Using IPI No-Shortcut mode [ 2.203942] Freeing unused kernel memory: 336k freed Loading, please wait... [ 2.293927] udev[861]: starting version 164 [ 3.027435] amd74xx 0000:00:14.2: UDMA100 controller [ 3.431450] amd74xx 0000:00:14.2: IDE controller (0x1022:0x209a rev 0x01) [ 3.520477] via-rhine.c:v1.10-LK1.5.0 2010-10-09 Written by Donald Becker [ 3.733420] Clocksource tsc unstable (delta = 78002609 ns) [ 3.767981] Switching to clocksource pit [ 3.999662] amd74xx 0000:00:14.2: IDE port disabled [ 4.314483] amd74xx 0000:00:14.2: not 100% native mode: will probe irqs later [ 4.335877] ide0: BM-DMA at 0xe000-0xe007 [ 4.661482] hda: SanDisk SDCFH-004G, CFA DISK drive [ 4.734985] usbcore: registered new interface driver usbfs [ 4.740141] usbcore: registered new interface driver hub [ 4.745467] usbcore: registered new device driver usb [ 4.823361] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.868302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.968251] hdb: LaCie d2Next-Quadra, ATA DISK drive [ 4.970663] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33 [ 4.971663] hda: UDMA/33 mode selected [ 4.975083] hdb: UDMA/100 mode selected [ 4.976947] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.980279] hda: max request size: 512KiB [ 4.981329] hda: 7813120 sectors (4000 MB) w/1KiB Cache, CHS=7751/255/63 [ 4.984724] hda: cache flushes not supported [ 4.994222] hda: hda1 [ 4.996985] hdb: max request size: 512KiB [ 4.998051] hdb: 3907029168 sectors (2000398 MB), CHS=65535/255/63 [ 5.007521] hdb: cache flushes supported [ 5.027807] hdb: hdb1 [ 5.036516] eth0: VIA Rhine III (Management Adapter) at 0xa0004000, 00:00:24:ce:09:70, IRQ 11. [ 5.044447] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1. [ 5.049468] ehci_hcd 0000:00:15.1: EHCI Host Controller [ 5.051004] ehci_hcd 0000:00:15.1: new USB bus registered, assigned bus number 1 [ 5.075336] ehci_hcd 0000:00:15.1: irq 15, io mem 0xa0006000 [ 5.082245] ehci_hcd 0000:00:15.1: USB 2.0 started, EHCI 1.00 [ 5.085361] hub 1-0:1.0: USB hub found [ 5.086874] hub 1-0:1.0: 4 ports detected [ 5.088849] ohci_hcd 0000:00:15.0: OHCI Host Controller [ 5.090253] ohci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2 [ 5.095107] ohci_hcd 0000:00:15.0: irq 15, io mem 0xa0005000 [ 5.182232] hub 2-0:1.0: USB hub found [ 5.183754] hub 2-0:1.0: 4 ports detected [ 5.190854] eth1: VIA Rhine III (Management Adapter) at 0xa0004100, 00:00:24:ce:09:71, IRQ 5. [ 5.199567] eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 5.224122] eth2: VIA Rhine III (Management Adapter) at 0xa0004200, 00:00:24:ce:09:72, IRQ 9. [ 5.233929] eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 5.244819] eth3: VIA Rhine III (Management Adapter) at 0xa0004300, 00:00:24:ce:09:73, IRQ 12. [ 5.251483] eth3: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 6.727080] udev[1053]: starting version 164 . Synthesizing the initial hotplug events...[ 7.569664] input: PC Speaker as /devices/platform/pcspkr/input/input0 [ 7.571110] AMD Geode RNG detected [ 7.650149] Disabling lock debugging due to kernel taint [ 7.716637] cs5535-mfd 0000:00:14.0: 5 devices registered. [ 8.006854] geode-aes: GEODE AES engine enabled. [ 8.777575] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x6200-0x63ff] [ 8.779663] cs5535-mfgpt cs5535-mfgpt: 8 MFGPT timers available [ 8.808867] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff] [ 8.809909] cs5535-gpio cs5535-gpio: GPIO support successfully loaded. done. Waiting for /dev to be fully populated...[ 9.842888] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered [ 10.485964] Error: Driver 'pcspkr' is already registered, aborting... done. Activating swap...done. [ 10.740291] EXT2-fs (hda1): warning: mounting unchecked fs, running e2fsck is recommended Cleaning up ifupdown.... [ 10.995413] pc87360: Device 0x09 not activated [ 11.092695] gpio: found bridge device 1022:2080 [ 11.093892] gpio: base at 6100 [ 11.098317] gpio: Soekris net5501 GPIO driver Version 1.3.3 (C) 2010 Lieven De Samblanx [ 11.144712] Real Time Clock Driver v1.12b Loading kernel modules...done. Activating lvm and md swap...done. Checking file systems...fsck from util-linux-ng 2.17.2 done. Mounting local filesystems...[ 21.581711] EXT4-fs (hdb1): recovery complete [ 21.583284] EXT4-fs (hdb1): mounted filesystem with ordered data mode. Opts: errors=remount-ro failed. Activating swapfile swap...done. Cleaning up temporary files.... Setting kernel variables ...done. Setting up resolvconf...done. Setting up networking.... Configuring network interfaces...done. Starting portmap daemon.... [ 27.175938] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Starting NFS common utilities: statd. Cleaning up temporary files.... Setting up ALSA...warning: 'alsactl restore' failed with error message 'alsactl: load_state:1610: No soundcards found...'...done. [ 29.363389] fuse init (API version 7.16) Loading the saved-state of the serial devices... voyage-sync: Start tmpfs... voyage-sync: Checking if recovery from a power failure is needed... voyage-sync: Copying /ro to /rw voyage-sync: Setting up tmpfs for changed files... voyage-sync: tmpfs: mount back /lib/init/rw/var/log to /var/log voyage-sync: tmpfs: mount back /lib/init/rw/var/tmp to /var/tmp voyage-sync: tmpfs: mount back /lib/init/rw/var/lib/mpd to /var/lib/mpd voyage-sync: tmpfs: mount back /lib/init/rw/var/lib/alsa to /var/lib/alsa voyage-sync: Start tmpfs completed INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Starting portmap daemon...Already running.. Starting NFS common utilities: statd. Starting watchdog keepalive daemon: wd_keepalive. Starting system log daemon.... Starting system message bus: dbus. Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ 34.070604] NET: Registered protocol family 10 . Starting kernel log daemon.... [ 35.663569] sshd (2068): /proc/2068/oom_adj is deprecated, please use /proc/2068/oom_score_adj instead. Starting OpenBSD Secure Shell server: sshd. Starting web server: lighttpd. Starting DNS forwarder and DHCP server: dnsmasq. Starting periodic command scheduler: cron. Starting Music Player Daemon: mpdlisten: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded) . nocatsplash daemon disabled - read /etc/default/nocatsplash. Remounting / as read-write ... Done. Removing /etc/nologin ... Stopping watchdog keepalive daemon.... Starting watchdog daemon.... Done. Remounting / as read-only ... Done. Debian GNU/Linux 6.0 voyage ttyS0 voyage login: root Password: Last login: Wed Sep 7 22:14:23 CEST 2011 from 192.168.0.105 on pts/1 Linux voyage 2.6.38-voyage-custom-v1.0b4 #1 SMP PREEMPT Wed Aug 31 13:12:10 CEST 2011 i586 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. __ __ \ \/ /___ __ __ ___ ___ ___ Useful Commands: \ // _ \\ \/ /,-_ |/ _ |/ -_) remountrw - mount disk as read-write \/ \___/ \ / \___,\_ |\___| remountro - mount disk as read-only _/_/ _'_| remove.docs - remove all docs and manpages { V o y a g e } - L i n u x < http://linux.voyage.hk > Version: 0.7 (Build Date 20110628) root@voyage:~# ls /mnt lost+found musica root@voyage:~# [ 72.249021] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 72.798298] usbcore: registered new interface driver snd-usb-audio