Unfortunately, adding ethdevice=eth0 to the boot parameters didn't change the issue. The problem still occurs.<div><br></div><div>Sorry for double posting by the way; I subscribed to the list and resent my message. Only after which I saw the previous one did go through just fine.</div>
<div><br></div><div>If it can be of any help, here is my PXE boot output:</div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-color:rgb(204,204,204);border-left-style:solid;padding-left:1ex">
<font size="1">PC Engines ALIX.2 v0.99h<br></font><font size="1">640 KB Base Memory<br></font><font size="1">261120 KB Extended Memory</font><font size="1"><br></font><font size="1">01F0 Master 044A TRANSCEND <br>
</font><font size="1">Phys C/H/S 1974/16/63 Log C/H/S 987/32/63</font><font size="1"><br></font><font size="1">Intel UNDI, PXE-2.0 (build 082)<br></font><font size="1">Copyright (C) 1997,1998,1999 Intel Corporation<br></font><font size="1">VIA Rhine III Management Adapter v2.43 (2005/12/15)</font><font size="1"><br>
</font><font size="1">CLIENT MAC ADDR: 00 0D B9 18 2B 50 <br></font><font size="1">CLIENT IP: 192.168.1.12 MASK: 255.255.255.0 DHCP IP: 192.168.1.200 <br></font><font size="1">GATEWAY IP: 192.168.1.1 <br></font><font size="1"> <br>
</font><font size="1">PXELINUX 4.05 20120630 Copyright (C) 1994-2011 H. Peter Anvin et al<br></font><font size="1">==============================================================================<br></font><font size="1"> __ __<br>
</font><font size="1"> \ \/ /___ __ __ ___ ___ ___<br></font><font size="1"> \ // _ \\ \/ /,-_ |/ _ |/ -_)<br></font><font size="1"> \/ \___/ \ / \___,\_ |\___|<br>
</font><font size="1"> _/_/ _'_|<br></font><font size="1"> { V o y a g e } - L i n u x<br></font><font size="1"> < <a href="http://linux.voyage.hk">http://linux.voyage.hk</a> ></font><font size="1"><br>
</font><font size="1"> 1. PXE Boot Voyage Linux with a login shell<br></font><font size="1"> 2. Start automated install for WRAP (/dev/hda and 38400 serial console)<br></font><font size="1"> 3. Start automated install for ALIX (/dev/hda and 38400 serial console)<br>
</font><font size="1"> 4. Start automated install for 45/48xx (/dev/hda and 19200 serial console)<br></font><font size="1"> 5. Start automated install for 55xx (/dev/hda and 19200 serial console)<br></font><font size="1"> 6. Start automated install for gerenic PC (/dev/hda and no serial console)</font><font size="1"><br>
</font><font size="1">==============================================================================<br></font><font size="1">boot: 0<br></font><font size="1">Loading linux....<br></font><font size="1">Loading initrd.img........ready.<br>
</font><font size="1">early console in setup code<br></font><font size="1">[ 0.000000] Linux version 3.4.4-voyage (unknown) (root@punknix-pluto) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREE2<br></font><font size="1">[ 0.000000] KERNEL supported cpus:<br>
</font><font size="1">[ 0.000000] Intel GenuineIntel<br></font><font size="1">[ 0.000000] AMD AuthenticAMD<br></font><font size="1">[ 0.000000] NSC Geode by NSC<br></font><font size="1">[ 0.000000] Cyrix CyrixInstead<br>
</font><font size="1">[ 0.000000] Centaur CentaurHauls<br></font><font size="1">[ 0.000000] Transmeta GenuineTMx86<br></font><font size="1">[ 0.000000] Transmeta TransmetaCPU<br></font><font size="1">[ 0.000000] UMC UMC UMC UMC<br>
</font><font size="1">[ 0.000000] BIOS-provided physical RAM map:<br></font><font size="1">[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)<br></font><font size="1">[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)<br>
</font><font size="1">[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)<br></font><font size="1">[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)<br></font><font size="1">[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!<br>
</font><font size="1">[ 0.000000] DMI not present or invalid.<br></font><font size="1">[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)<br></font><font size="1">[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)<br>
</font><font size="1">[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000<br></font><font size="1">[ 0.000000] initial memory mapped : 0 - 01800000<br></font><font size="1">[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384<br>
</font><font size="1">[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000<br></font><font size="1">[ 0.000000] 0000000000 - 0000400000 page 4k<br></font><font size="1">[ 0.000000] 0000400000 - 0010000000 page 2M<br>
</font><font size="1">[ 0.000000] kernel direct mapping tables up to 10000000 @ 17fc000-1800000<br></font><font size="1">[ 0.000000] RAMDISK: 0fa3b000 - 0ffdf000<br></font><font size="1">[ 0.000000] ACPI Error: A valid RSDP was not found (20120320/tbxfroot-219)<br>
</font><font size="1">[ 0.000000] 0MB HIGHMEM available.<br></font><font size="1">[ 0.000000] 256MB LOWMEM available.<br></font><font size="1">[ 0.000000] mapped low ram: 0 - 10000000<br></font><font size="1">[ 0.000000] low ram: 0 - 10000000<br>
</font><font size="1">[ 0.000000] Zone PFN ranges:<br></font><font size="1">[ 0.000000] DMA 0x00000010 -> 0x00001000<br></font><font size="1">[ 0.000000] Normal 0x00001000 -> 0x00010000<br></font><font size="1">[ 0.000000] HighMem empty<br>
</font><font size="1">[ 0.000000] Movable zone start PFN for each node<br></font><font size="1">[ 0.000000] Early memory PFN ranges<br></font><font size="1">[ 0.000000] 0: 0x00000010 -> 0x000000a0<br></font><font size="1">[ 0.000000] 0: 0x00000100 -> 0x00010000<br>
</font><font size="1">[ 0.000000] On node 0 totalpages: 65424<br></font><font size="1">[ 0.000000] DMA zone: 32 pages used for memmap<br></font><font size="1">[ 0.000000] DMA zone: 0 pages reserved<br></font><font size="1">[ 0.000000] DMA zone: 3952 pages, LIFO batch:0<br>
</font><font size="1">[ 0.000000] Normal zone: 480 pages used for memmap<br></font><font size="1">[ 0.000000] Normal zone: 60960 pages, LIFO batch:15<br></font><font size="1">[ 0.000000] Using APIC driver default<br>
</font><font size="1">[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs<br></font><font size="1">[ 0.000000] No local APIC present or hardware disabled<br></font><font size="1">[ 0.000000] APIC: disable apic facility<br>
</font><font size="1">[ 0.000000] APIC: switched to apic NOOP<br></font><font size="1">[ 0.000000] nr_irqs_gsi: 16<br></font><font size="1">[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000<br>
</font><font size="1">[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000<br></font><font size="1">[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff00000)<br></font><font size="1">[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1<br>
</font><font size="1">[ 0.000000] PERCPU: Embedded 11 pages/cpu @cfff0000 s24256 r0 d20800 u45056<br></font><font size="1">[ 0.000000] pcpu-alloc: s24256 r0 d20800 u45056 alloc=11*4096<br></font><font size="1">[ 0.000000] pcpu-alloc: [0] 0 <br>
</font><font size="1">[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64912<br></font><font size="1">[ 0.000000] Kernel command line: initrd=initrd.img boot=live netboot=nfs nfsroot=192.168.1.200:/live/image/ live-getty <br>
</font><font size="1">[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)<br></font><font size="1">[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)<br></font><font size="1">[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)<br>
</font><font size="1">[ 0.000000] Initializing CPU#0<br></font><font size="1">[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)<br></font><font size="1">[ 0.000000] Memory: 249148k/262144k available (2812k kernel code, 12548k reserved, 1095k data, 344k init, 0k highmem)<br>
</font><font size="1">[ 0.000000] virtual kernel memory layout:<br></font><font size="1">[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)<br></font><font size="1">[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)<br>
</font><font size="1">[ 0.000000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)<br></font><font size="1">[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)<br></font><font size="1">[ 0.000000] .init : 0xc13d1000 - 0xc1427000 ( 344 kB)<br>
</font><font size="1">[ 0.000000] .data : 0xc12bf0a7 - 0xc13d1000 (1095 kB)<br></font><font size="1">[ 0.000000] .text : 0xc1000000 - 0xc12bf0a7 (2812 kB)<br></font><font size="1">[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.<br>
</font><font size="1">[ 0.000000] Preemptible hierarchical RCU implementation.<br></font><font size="1">[ 0.000000] NR_IRQS:2304 nr_irqs:256 16<br></font><font size="1">[ 0.000000] CPU 0 irqstacks, hard=cf406000 soft=cf408000<br>
</font><font size="1">[ 0.000000] Console: colour dummy device 80x25<br></font><font size="1">[ 0.000000] console [ttyS0] enabled<br></font><font size="1">[ 0.000000] Fast TSC calibration using PIT<br></font><font size="1">[ 0.000000] Detected 498.021 MHz processor.<br>
</font><font size="1">[ 0.003008] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.04 BogoMIPS (lpj=498021)<br></font><font size="1">[ 0.005015] pid_max: default: 32768 minimum: 301<br>
</font><font size="1">[ 0.007348] Mount-cache hash table entries: 512<br></font><font size="1">[ 0.010080] SMP alternatives: switching to UP code<br></font><font size="1">[ 0.020081] Freeing SMP alternatives: 16k freed<br>
</font><font size="1">[ 0.021185] weird, boot CPU (#0) not listed by the BIOS.<br></font><font size="1">[ 0.022013] SMP motherboard not detected.<br></font><font size="1">[ 0.023013] Local APIC not detected. Using dummy APIC emulation.<br>
</font><font size="1">[ 0.024010] SMP disabled<br></font><font size="1">[ 0.025012] Performance Events: no PMU driver, software events only.<br></font><font size="1">[ 0.033034] Brought up 1 CPUs<br></font><font size="1">[ 0.034018] Total of 1 processors activated (996.04 BogoMIPS).<br>
</font><font size="1">[ 0.036251] devtmpfs: initialized<br></font><font size="1">[ 0.039282] NET: Registered protocol family 16<br></font><font size="1">[ 0.047127] PCI: PCI BIOS revision 2.10 entry at 0xfced9, last bus=0<br>
</font><font size="1">[ 0.048017] PCI: Using configuration type 1 for base access<br></font><font size="1">[ 0.071736] bio: create slab <bio-0> at 0<br></font><font size="1">[ 0.073638] ACPI: Interpreter disabled.<br>
</font><font size="1">[ 0.074707] vgaarb: loaded<br></font><font size="1">[ 0.076252] SCSI subsystem initialized<br></font><font size="1">[ 0.078488] PCI: Probing PCI hardware<br></font><font size="1">[ 0.079040] PCI: Probing PCI hardware (bus 00)<br>
</font><font size="1">[ 0.080039] PCI: root bus 00: using default resources<br></font><font size="1">[ 0.081281] PCI host bridge to bus 0000:00<br></font><font size="1">[ 0.082031] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]<br>
</font><font size="1">[ 0.083030] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]<br></font><font size="1">[ 0.084062] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000<br></font><font size="1">[ 0.086040] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f]<br>
</font><font size="1">[ 0.087206] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000<br></font><font size="1">[ 0.088062] pci 0000:00:01.2: reg 10: [mem 0xefff4000-0xefff7fff]<br></font><font size="1">[ 0.090101] pci 0000:00:09.0: [1106:3053] type 00 class 0x020000<br>
</font><font size="1">[ 0.091045] pci 0000:00:09.0: reg 10: [io 0x1000-0x10ff]<br></font><font size="1">[ 0.092028] pci 0000:00:09.0: reg 14: [mem 0xe0000000-0xe00000ff]<br></font><font size="1">[ 0.093130] pci 0000:00:09.0: supports D1 D2<br>
</font><font size="1">[ 0.094012] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold<br></font><font size="1">[ 0.095059] pci 0000:00:0b.0: [1106:3053] type 00 class 0x020000<br></font><font size="1">[ 0.096039] pci 0000:00:0b.0: reg 10: [io 0x1400-0x14ff]<br>
</font><font size="1">[ 0.097025] pci 0000:00:0b.0: reg 14: [mem 0xe0040000-0xe00400ff]<br></font><font size="1">[ 0.098127] pci 0000:00:0b.0: supports D1 D2<br></font><font size="1">[ 0.099009] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold<br>
</font><font size="1">[ 0.100063] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100<br></font><font size="1">[ 0.102054] pci 0000:00:0f.0: reg 10: [io 0x6000-0x6007]<br></font><font size="1">[ 0.103098] pci 0000:00:0f.0: reg 14: [io 0x6100-0x61ff]<br>
</font><font size="1">[ 0.104098] pci 0000:00:0f.0: reg 18: [io 0x6200-0x623f]<br></font><font size="1">[ 0.106030] pci 0000:00:0f.0: reg 20: [io 0x9d00-0x9d7f]<br></font><font size="1">[ 0.107098] pci 0000:00:0f.0: reg 24: [io 0x9c00-0x9c3f]<br>
</font><font size="1">[ 0.108150] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180<br></font><font size="1">[ 0.109244] pci 0000:00:0f.2: reg 20: [io 0xff00-0xff0f]<br></font><font size="1">[ 0.110211] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310<br>
</font><font size="1">[ 0.111088] pci 0000:00:0f.4: reg 10: [mem 0xefffe000-0xefffefff]<br></font><font size="1">[ 0.113115] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold<br></font><font size="1">[ 0.114088] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320<br>
</font><font size="1">[ 0.115088] pci 0000:00:0f.5: reg 10: [mem 0xefffd000-0xefffdfff]<br></font><font size="1">[ 0.117212] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold<br></font><font size="1">[ 0.121417] PCI: pci_cache_line_size set to 32 bytes<br>
</font><font size="1">[ 0.124232] Switching to clocksource pit<br></font><font size="1">[ 0.125517] pnp: PnP ACPI: disabled<br></font><font size="1">[ 0.151056] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]<br>
</font><font size="1">[ 0.152856] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]<br></font><font size="1">[ 0.154215] NET: Registered protocol family 2<br></font><font size="1">[ 0.155687] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)<br>
</font><font size="1">[ 0.157325] TCP established hash table entries: 8192 (order: 4, 65536 bytes)<br></font><font size="1">[ 0.158694] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)<br></font><font size="1">[ 0.159231] TCP: Hash tables configured (established 8192 bind 8192)<br>
</font><font size="1">[ 0.160311] TCP: reno registered<br></font><font size="1">[ 0.161036] UDP hash table entries: 128 (order: 0, 4096 bytes)<br></font><font size="1">[ 0.162589] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)<br>
</font><font size="1">[ 0.163824] NET: Registered protocol family 1<br></font><font size="1">[ 0.164435] RPC: Registered named UNIX socket transport module.<br></font><font size="1">[ 0.165229] RPC: Registered udp transport module.<br>
</font><font size="1">[ 0.166389] RPC: Registered tcp transport module.<br></font><font size="1">[ 0.167537] RPC: Registered tcp NFSv4.1 backchannel transport module.<br></font><font size="1">[ 0.169214] PCI: CLS 32 bytes, default 32<br>
</font><font size="1">[ 0.170622] Trying to unpack rootfs image as initramfs...<br></font><font size="1">[ 1.565843] Freeing initrd memory: 5776k freed<br></font><font size="1">[ 1.574073] platform rtc_cmos: registered platform RTC device (no PNP device found)<br>
</font><font size="1">[ 1.576666] microcode: AMD CPU family 0x5 not supported<br></font><font size="1">[ 1.580111] alix: system is recognized as "PC Engines ALIX.2 v0.99h"<br></font><font size="1">[ 1.587063] NFS: Registering the id_resolver key type<br>
</font><font size="1">[ 1.588997] msgmni has been set to 497<br></font><font size="1">[ 1.591988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)<br></font><font size="1">[ 1.593252] io scheduler noop registered<br>
</font><font size="1">[ 1.594078] io scheduler deadline registered<br></font><font size="1">[ 1.595085] io scheduler cfq registered (default)<br></font><font size="1">[ 1.760077] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled<br>
</font><font size="1">[ 1.761328] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A<br></font><font size="1">[ 1.762408] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A<br></font><font size="1">[ 1.765291] Linux agpgart interface v0.103<br>
</font><font size="1">[ 1.781816] brd: module loaded<br></font><font size="1">[ 1.783141] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could not acquire Mutex [0x1] (20120320/utmutex-276)<br></font><font size="1">[ 1.786176] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could not acquire Mutex [0x1] (20120320/utmutex-276)<br>
</font><font size="1">[ 1.789234] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff]<br></font><font size="1">[ 1.790003] gpiochip_add: registered GPIOs 0 to 31 on device: cs5535-gpio<br></font><font size="1">[ 1.791428] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could not acquire Mutex [0x1] (20120320/utmutex-276)<br>
</font><font size="1">[ 1.795519] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could not acquire Mutex [0x1] (20120320/utmutex-276)<br></font><font size="1">[ 1.798544] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could not acquire Mutex [0x1] (20120320/utmutex-276)<br>
</font><font size="1">[ 1.801605] cs5535-mfd 0000:00:0f.0: 5 devices registered.<br></font><font size="1">[ 1.802306] Uniform Multi-Platform E-IDE driver<br></font><font size="1">[ 1.803426] ide-gd driver 1.18<br>
</font><font size="1">[ 1.806315] i8042: PNP: No PS/2 controller found. Probing ports directly.<br></font><font size="1">[ 1.807728] i8042: No controller found<br></font><font size="1">[ 1.809729] mousedev: PS/2 mouse device common for all mice<br>
</font><font size="1">[ 1.812211] cpuidle: using governor ladder<br></font><font size="1">[ 1.813553] cpuidle: using governor menu<br></font><font size="1">[ 1.814791] Registered led device: alix:1<br></font><font size="1">[ 1.816116] Registered led device: alix:2<br>
</font><font size="1">[ 1.817447] Registered led device: alix:3<br></font><font size="1">[ 1.820070] TCP: cubic registered<br></font><font size="1">[ 1.821102] NET: Registered protocol family 17<br></font><font size="1">[ 1.822598] Registering the dns_resolver key type<br>
</font><font size="1">[ 1.823185] Using IPI No-Shortcut mode<br></font><font size="1">[ 1.827429] Freeing unused kernel memory: 344k freed<br></font><font size="1">[ 1.829418] Write protecting the kernel text: 2816k<br>
</font><font size="1">[ 1.830302] Write protecting the kernel read-only data: 908k<br></font><font size="1">Loading, please wait...<br></font><font size="1">[ 1.898152] libata version 3.00 loaded.<br></font><font size="1">[ 1.903372] scsi0 : ata_generic<br>
</font><font size="1">[ 1.904804] scsi1 : ata_generic<br></font><font size="1">[ 1.906927] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14<br></font><font size="1">[ 1.907853] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15<br>
</font><font size="1">[ 2.063028] ata1.00: CFA: TRANSCEND, 20070418, max UDMA/66<br></font><font size="1">[ 2.064535] ata1.00: 1989792 sectors, multi 0: LBA <br></font><font size="1">[ 2.065202] ata1.00: configured for UDMA/66<br>
</font><font size="1">[ 2.077166] scsi 0:0:0:0: Direct-Access ATA TRANSCEND 2007 PQ: 0 ANSI: 5<br></font><font size="1">[ 2.079849] sd 0:0:0:0: [sda] 1989792 512-byte logical blocks: (1.01 GB/971 MiB)<br>
</font><font size="1">[ 2.081379] sd 0:0:0:0: [sda] Write Protect is off<br></font><font size="1">[ 2.081810] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00<br></font><font size="1">[ 2.083169] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA<br>
</font><font size="1">[ 2.575606] Switching to clocksource tsc</font></blockquote><div><br><div class="gmail_quote">On Mon, Oct 22, 2012 at 3:22 AM, Kim-man 'Punky' TSE <span dir="ltr"><<a href="mailto:punkytse@punknix.com" target="_blank">punkytse@punknix.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi Roel,<br>
<br>
I found the problem the PXEboot board cannot get the IP. Try adding ethdevice=eth0 to /tftpboot/pxelinux.cfg/default<div><div class="h5"><br>
<br>
On 10/21/2012 11:01 PM, Roel Huybrechts wrote:<br>
</div></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div class="h5">
Hi all,<br>
<br>
I'm trying to install the current Voyage on an Alix board using the PXE option from the live cd. However the Alix fails to boot the PXE environment, hanging at "Switching clocksource to pit". I don't think the clocksource is the reason it hangs, I suspect it's just the last line that is printed before something else goes wrong -- I tried adding different "clocksource=" settings to the boot parameters without any success.<br>
<br>
The problem has earlier been described in this thread: <a href="http://list.voyage.hk/pipermail/voyage-linux/2012-August/015298.html" target="_blank">http://list.voyage.hk/<u></u>pipermail/voyage-linux/2012-<u></u>August/015298.html</a><br>
Unfortunately I cannot find the solution there ;)<br>
<br>
Any help regarding (debugging of) the issue is greatly appreciated! When needed, I can send the dmesg output from the serial console.<br>
<br>
Kind regards,<br>
Roel<br></div></div>
-- Regards, Kim-man "Punky" Tse * Open Source Embedded Solutions and Systems - Voyage Linux (<a href="http://linux.voyage.hk" target="_blank">http://linux.voyage.hk</a>) - Voyage ONE (<a href="http://linux.voyage.hk/voyage-one" target="_blank">http://linux.voyage.hk/<u></u>voyage-one</a>) - Voyage MPD (<a href="http://linux.voyage.hk/voyage-mpd" target="_blank">http://linux.voyage.hk/<u></u>voyage-mpd</a>) * Voyage Store (<a href="http://store.voyage.hk" target="_blank">http://store.voyage.hk</a>) <br>
</blockquote>
</blockquote></div><br></div>