Hi Christian,<div><br></div><div>Unfortunately I haven't found a solution to this problem yet. I did some testing however and found that a minimally adjusted Debian live build shows the same issue, so perhaps this is an upstream problem?</div>
<div><br></div><div>I am eager to find a solution though, because I need the PXE installation to install 50+ boards. I'd rather not install them manually. ;) So any input in resolving this is welcome.</div><div><br></div>
<div>Kind regards!</div>
<div class="gmail_extra"><br><br><div class="gmail_quote">On Sun, Dec 2, 2012 at 2:36 PM, Christian H. <span dir="ltr"><<a href="mailto:chrrrr@gmail.com" target="_blank">chrrrr@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Hi,<br>
<br>
just to provide you potentially helpful information - here is what I got using the serial console:<br>
<br>
<br>
PC Engines ALIX.2 v0.99h<br>
640 KB Base Memory<br>
261120 KB Extended Memory<br>
Waiting for HDD ...<br>
<br>
01F0 Master 044A CF 4GB<br>
Phys C/H/S 7769/16/63 Log C/H/S 971/128/63<br>
<br>
Intel UNDI, PXE-2.0 (build 082)<br>
Copyright (C) 1997,1998,1999 Intel Corporation<br>
VIA Rhine III Management Adapter v2.43 (2005/12/15)<br>
<br>
CLIENT MAC ADDR: 00 0D B9 18 AF 90<br>
CLIENT IP: 192.168.1.10 MASK: 255.255.255.0 DHCP IP: 192.168.1.200<br>
GATEWAY IP: 192.168.1.1<br>
<br>
PXELINUX 4.05 20120630 Copyright (C) 1994-2011 H. Peter Anvin et al<br>
==============================================================================<br>
__ __<br>
\ \/ /___ __ __ ___ ___ ___<br>
\ // _ \\ \/ /,-_ |/ _ |/ -_)<br>
\/ \___/ \ / \___,\_ |\___|<br>
_/_/ _'_|<br>
{ V o y a g e } - L i n u x<br>
< <a href="http://linux.voyage.hk" target="_blank">http://linux.voyage.hk</a> ><br>
<br>
1. PXE Boot Voyage Linux with a login shell<br>
2. Start automated install for WRAP (/dev/hda and 38400 serial console)<br>
3. Start automated install for ALIX (/dev/hda and 38400 serial console)<br>
4. Start automated install for 45/48xx (/dev/hda and 19200 serial console)<br>
5. Start automated install for 55xx (/dev/hda and 19200 serial console)<br>
6. Start automated install for gerenic PC (/dev/hda and no serial console)<br>
<br>
==============================================================================<br>
boot: 3<br>
Loading linux....<br>
Loading initrd.img........ready.<br>
[ 0.000000] Linux version 3.4.4-voyage (unknown) (root@punknix-pluto) (gcc ve rsion 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Sun Aug 12 12:01:41 HKT 2012<br>
[ 0.000000] KERNEL supported cpus:<br>
[ 0.000000] Intel GenuineIntel<br>
[ 0.000000] AMD AuthenticAMD<br>
[ 0.000000] NSC Geode by NSC<br>
[ 0.000000] Cyrix CyrixInstead<br>
[ 0.000000] Centaur CentaurHauls<br>
[ 0.000000] Transmeta GenuineTMx86<br>
[ 0.000000] Transmeta TransmetaCPU<br>
[ 0.000000] UMC UMC UMC UMC<br>
[ 0.000000] BIOS-provided physical RAM map:<br>
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)<br>
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)<br>
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable)<br>
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)<br>
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!<br>
[ 0.000000] DMI not present or invalid.<br>
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x100000<br>
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000<br>
[ 0.000000] RAMDISK: 0fa3b000 - 0ffdf000<br>
[ 0.000000] ACPI Error: A valid RSDP was not found (20120320/tbxfroot-219)<br>
[ 0.000000] 0MB HIGHMEM available.<br>
[ 0.000000] 256MB LOWMEM available.<br>
[ 0.000000] mapped low ram: 0 - 10000000<br>
[ 0.000000] low ram: 0 - 10000000<br>
[ 0.000000] Zone PFN ranges:<br>
[ 0.000000] DMA 0x00000010 -> 0x00001000<br>
[ 0.000000] Normal 0x00001000 -> 0x00010000<br>
[ 0.000000] HighMem empty<br>
[ 0.000000] Movable zone start PFN for each node<br>
[ 0.000000] Early memory PFN ranges<br>
[ 0.000000] 0: 0x00000010 -> 0x000000a0<br>
[ 0.000000] 0: 0x00000100 -> 0x00010000<br>
[ 0.000000] Using APIC driver default<br>
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs<br>
[ 0.000000] No local APIC present or hardware disabled<br>
[ 0.000000] APIC: disable apic facility<br>
[ 0.000000] APIC: switched to apic NOOP<br>
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000<br>
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000<br>
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff0 0000)<br>
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_id s:1<br>
[ 0.000000] PERCPU: Embedded 11 pages/cpu @cfff0000 s24256 r0 d20800 u45056<br>
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 64912<br>
[ 0.000000] Kernel command line: initrd=initrd.img autoinstall=alix boot=live netboot=nfs nfsroot=192.168.1.200:/live/image live-getty noautologin all_generi c_ide console=ttyS0,38400n8 BOOT_IMAGE=linux<br>
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)<br>
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)<br>
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)<br>
[ 0.000000] Initializing CPU#0<br>
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)<br>
[ 0.000000] Memory: 249148k/262144k available (2812k kernel code, 12548k rese rved, 1095k data, 344k init, 0k highmem)<br>
[ 0.000000] virtual kernel memory layout:<br>
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)<br>
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)<br>
[ 0.000000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)<br>
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)<br>
[ 0.000000] .init : 0xc13d1000 - 0xc1427000 ( 344 kB)<br>
[ 0.000000] .data : 0xc12bf0a7 - 0xc13d1000 (1095 kB)<br>
[ 0.000000] .text : 0xc1000000 - 0xc12bf0a7 (2812 kB)<br>
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.<br>
[ 0.000000] Preemptible hierarchical RCU implementation.<br>
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16<br>
[ 0.000000] Console: colour dummy device 80x25<br>
[ 0.000000] console [ttyS0] enabled<br>
[ 0.000000] Fast TSC calibration using PIT<br>
[ 0.000000] Detected 498.072 MHz processor.<br>
[ 0.003007] Calibrating delay loop (skipped), value calculated using timer fr equency.. 996.14 BogoMIPS (lpj=498072)<br>
[ 0.005015] pid_max: default: 32768 minimum: 301<br>
[ 0.007338] Mount-cache hash table entries: 512<br>
[ 0.010072] SMP alternatives: switching to UP code<br>
[ 0.020088] Freeing SMP alternatives: 16k freed<br>
[ 0.021185] weird, boot CPU (#0) not listed by the BIOS.<br>
[ 0.022013] SMP motherboard not detected.<br>
[ 0.023012] Local APIC not detected. Using dummy APIC emulation.<br>
[ 0.024010] SMP disabled<br>
[ 0.025012] Performance Events: no PMU driver, software events only.<br>
[ 0.033035] Brought up 1 CPUs<br>
[ 0.034017] Total of 1 processors activated (996.14 BogoMIPS).<br>
[ 0.036259] devtmpfs: initialized<br>
[ 0.039236] NET: Registered protocol family 16<br>
[ 0.047076] PCI: PCI BIOS revision 2.10 entry at 0xfced9, last bus=0<br>
[ 0.048017] PCI: Using configuration type 1 for base access<br>
[ 0.071673] bio: create slab <bio-0> at 0<br>
[ 0.073562] ACPI: Interpreter disabled.<br>
[ 0.074708] vgaarb: loaded<br>
[ 0.077218] SCSI subsystem initialized<br>
[ 0.079467] PCI: Probing PCI hardware<br>
[ 0.080350] PCI host bridge to bus 0000:00<br>
[ 0.081053] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]<br>
[ 0.082034] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]<br>
[ 0.093300] Switching to clocksource pit<br>
[ 0.094533] pnp: PnP ACPI: disabled<br>
[ 0.120648] NET: Registered protocol family 2<br>
[ 0.122244] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)<br>
[ 0.123933] TCP established hash table entries: 8192 (order: 4, 65536 bytes)<br>
[ 0.125303] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)<br>
[ 0.126894] TCP: Hash tables configured (established 8192 bind 8192)<br>
[ 0.127973] TCP: reno registered<br>
[ 0.129702] UDP hash table entries: 128 (order: 0, 4096 bytes)<br>
[ 0.130254] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)<br>
[ 0.131499] NET: Registered protocol family 1<br>
[ 0.133170] RPC: Registered named UNIX socket transport module.<br>
[ 0.133972] RPC: Registered udp transport module.<br>
[ 0.135133] RPC: Registered tcp transport module.<br>
[ 0.136280] RPC: Registered tcp NFSv4.1 backchannel transport module.<br>
[ 0.138294] Trying to unpack rootfs image as initramfs...<br>
[ 1.532559] Freeing initrd memory: 5776k freed<br>
[ 1.539788] platform rtc_cmos: registered platform RTC device (no PNP device found)<br>
[ 1.542358] microcode: AMD CPU family 0x5 not supported<br>
[ 1.545789] alix: system is recognized as "PC Engines ALIX.2 v0.99h"<br>
[ 1.552732] NFS: Registering the id_resolver key type<br>
[ 1.554666] msgmni has been set to 497<br>
[ 1.557569] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)<br>
[ 1.557817] io scheduler noop registered<br>
[ 1.559689] io scheduler deadline registered<br>
[ 1.561770] io scheduler cfq registered (default)<br>
[ 1.726777] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled<br>
[ 1.729059] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A<br>
[ 1.731121] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A<br>
[ 1.734011] Linux agpgart interface v0.103<br>
[ 1.750526] brd: module loaded<br>
[ 1.750848] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could not acquire Mutex [0x1] (20120320/utmutex-276)<br>
[ 1.753924] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could not acquire Mutex [0x1] (20120320/utmutex-276)<br>
[ 1.756974] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff]<br>
[ 1.758784] gpiochip_add: registered GPIOs 0 to 31 on device: cs5535-gpio<br>
[ 1.760211] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could not acquire Mutex [0x1] (20120320/utmutex-276)<br>
[ 1.763232] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could not acquire Mutex [0x1] (20120320/utmutex-276)<br>
[ 1.766285] ACPI Exception: AE_BAD_PARAMETER, Thread 3477265344 could not acquire Mutex [0x1] (20120320/utmutex-276)<br>
[ 1.769360] cs5535-mfd 0000:00:0f.0: 5 devices registered.<br>
[ 1.770083] Uniform Multi-Platform E-IDE driver<br>
[ 1.771220] ide-gd driver 1.18<br>
[ 1.774113] i8042: PNP: No PS/2 controller found. Probing ports directly.<br>
[ 1.776520] i8042: No controller found<br>
[ 1.777456] mousedev: PS/2 mouse device common for all mice<br>
[ 1.778902] cpuidle: using governor ladder<br>
[ 1.780261] cpuidle: using governor menu<br>
[ 1.783528] TCP: cubic registered<br>
[ 1.784565] NET: Registered protocol family 17<br>
[ 1.785022] Registering the dns_resolver key type<br>
[ 1.786636] Using IPI No-Shortcut mode<br>
[ 1.790976] Freeing unused kernel memory: 344k freed<br>
[ 1.792948] Write protecting the kernel text: 2816k<br>
[ 1.793829] Write protecting the kernel read-only data: 908k<br>
Loading, please wait...<br>
[ 1.863483] scsi0 : ata_generic<br>
[ 1.864923] scsi1 : ata_generic<br>
[ 1.867024] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14<br>
[ 1.867954] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15<br>
[ 2.022972] ata1.00: CFA: CF 4GB, 20080820, max UDMA/66<br>
[ 2.023679] ata1.00: 7831152 sectors, multi 0: LBA<br>
[ 2.025346] ata1.00: configured for UDMA/66<br>
[ 2.037105] scsi 0:0:0:0: Direct-Access ATA CF 4GB 2008 PQ: 0 ANSI: 5<br>
[ 2.039821] sd 0:0:0:0: [sda] 7831152 512-byte logical blocks: (4.00 GB/3.73 GiB)<br>
[ 2.041674] sd 0:0:0:0: [sda] Write Protect is off<br>
[ 2.043290] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA<br>
[ 2.539550] Switching to clocksource tsc<br>
<br>
<br>
<br>
Best regards<br>
<div class="HOEnZb"><div class="h5">Christian<br>
_______________________________________________<br>
Voyage-linux mailing list<br>
<a href="mailto:Voyage-linux@list.voyage.hk">Voyage-linux@list.voyage.hk</a><br>
<a href="http://list.voyage.hk/mailman/listinfo/voyage-linux" target="_blank">http://list.voyage.hk/mailman/listinfo/voyage-linux</a><br>
</div></div></blockquote></div><br></div>