[Voyage-products] Wrap board with bonding module and VLAN

[Punky Tse]

Michael,

You hit the kernel bug, are you able to update your current kernel from 
2.6.8 to 2.6.11 and test if it is fixed in the later kernel?

- Punky

Michael Theurl wrote:

>Hello list,
>
>I run a Wrap box from pcengines.ch with the latest packages from
>voayage.hk 
>And have now some real trouble with the kernel 
>(Linux voyage 2.6.8-486-voyage #1 Mon Feb 14 18:38:42 GMT 2005 i586
>GNU/Linux)
>
>i use the natsemi interface with the bonding module. On the bonding
>interface i run some vlan's.
>
>
>Loading the bonding module and config:
>--------------------------------------
>modprobe bonding mode=2 miimon=100
>
>ifconfig eth1 down
>ifconfig eth2 down
>
>ifconfig bond0 hw ether 00:0c:29:0c:22:1e
>ifconfig bond0 up
>
>ifenslave bond0 eth1
>ifenslave bond0 eth2
>
>vconfig bond0 add 5
>
>i write the ip to the vlan interface at bond0 
>
>and start a ping and after one or two packets i got this:
>
>oyage:~# ping 172.16.60.1
>PING 172.16.60.1bad: scheduling while atomic!
> (172.16.60.1) 5 [<c0226000>]6(84) bytes of data.
> schedule+0x3c/0x3e6
> [<c0101c5c>] default_idle+0x0/0x26
> [<c02e007b>] rand_initialize+0x3f/0xbf
> [<c0101ce1>] cpu_idle+0x30/0x32
> [<c02d45e9>] start_kernel+0x14f/0x154
>64 bytes from 172.16.60.1: icmp_seq=1 ttl=64 time=0.783 ms
>bad: scheduling while atomic!
> [<c0226000>] schedule+0x3c/0x3e6
> [<c0101c5c>] default_idle+0x0/0x26
> [<c0101ce1>] cpu_idle+0x30/0x32
> [<c02d45e9>] start_kernel+0x14f/0x154
>bad: scheduling while atomic!
> [<c0226000>] schedule+0x3c/0x3e6
> [<c0101c5c>] default_idle+0x0/0x26
> [<c0101ce1>] cpu_idle+0x30/0x32
> [<c02d45e9>] start_kernel+0x14
>
>
>is this a known problem ?
>
>cu
>Mike
>  
>


-- 
Regards,
Punky
P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

Voyage Linux
(http://www.voyage.hk/software/voyage.html)