[Voyage-linux] Garbled HyperTerm

[Joe Nelson]

Wow.  That was simple.  Must be something funny with that higher baud
rate.  Changing it to 9600 did the trick.  Thanks.

On Apr 8, 2005 1:00 PM, Robert Haskins <rhaskins at cnetwork.com> wrote:
> I'd suggest setting your Hyperterm console to 9600 8n1. Also, verify
> that your net4501 BIOS is set to 9600 as well. vt100 terminal emulation
> should work fine. My net4501 with voyage-0.1 works just fine with these
> settings.
> 
> Joe Nelson wrote:
> > I have a Soekris net4501 that has been running LEAF for quite a while
> > and I'm looking to upgrade it to a full blown Debian.  So far Voyage
> > looks like it fits the bill.  I have loaded it on a 256 MB CF card and
> > it seems like it loaded up without any problems.  The issue is when I
> > try to boot it up and watch the boot up process using HyperTerminal on
> > a Windows machine.  The text appears all garbled.  I would guess that
> > I need to use a different terminal emulation or something.  I've tried
> > a few but they all seem to leave the text messed up.  Am I looking at
> > the right thing?  Do I need to look elsewhere for my solution?
> >
> > Thank you
> >
> 


-- 
Joe Nelson
Air Wired
http://www.airwired.net