[Voyage-linux] Garbled HyperTerm

[Kelly Hogan]

Actually it is configured into lilo, inittab, and your gettys

We will have a version this week with all patched to use the standard
19200 that the WRAP boards default to in the BIOS.  
On Fri, 2005-04-08 at 12:08, Joe Nelson wrote:

> Wow.  That was simple.  Must be something funny with that higher baud
> rate.  Changing it to 9600 did the trick.  Thanks.
> 
> On Apr 8, 2005 1:00 PM, Robert Haskins <rhaskins at cnetwork.com> wrote:
> > I'd suggest setting your Hyperterm console to 9600 8n1. Also, verify
> > that your net4501 BIOS is set to 9600 as well. vt100 terminal emulation
> > should work fine. My net4501 with voyage-0.1 works just fine with these
> > settings.
> > 
> > Joe Nelson wrote:
> > > I have a Soekris net4501 that has been running LEAF for quite a while
> > > and I'm looking to upgrade it to a full blown Debian.  So far Voyage
> > > looks like it fits the bill.  I have loaded it on a 256 MB CF card and
> > > it seems like it loaded up without any problems.  The issue is when I
> > > try to boot it up and watch the boot up process using HyperTerminal on
> > > a Windows machine.  The text appears all garbled.  I would guess that
> > > I need to use a different terminal emulation or something.  I've tried
> > > a few but they all seem to leave the text messed up.  Am I looking at
> > > the right thing?  Do I need to look elsewhere for my solution?
> > >
> > > Thank you
> > >
> > 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20050408/12aecc94/attachment-0002.html>