[Voyage-linux] Voyage Not Booting

[Punky Tse]

Andrew,

What module did you select when you run voyage.update?  I think you
should have pressed "1" for wrap.  There are some options for you to
verify what went wrong.

- Use minicom in Fedora 2 instead of hyper terminal, which I have no
experience before
- If the wrap is connected to eth0 and can obtain IP through DHCP from
it.  After you boot wrap up one minute, you should be able to login
the board with ssh.
- send the hyper terminal output to this list may help identify what's wrong.

On Tue, 08 Mar 2005 11:07:14 -0700, Andrew Niemantsverdriet
<andrew at pure-wireless.net> wrote:
> Now I can not get Voyage to boot. I have a wrap 2.c hooked up to a
> windows xp machine via a null modem cable. I have hyper terminal setup
> like 9600 8-N-1 Flow Control = none. I have changed the wrap boards bios
> to be 9600 as well.
> 
> When I initally plug the board in I see the bios messages come across
> the screen then the messages stop after printing a capital L . I can not
> type any commands or anything.
> 
> Was it a bad write? Do I have settings wrong? How can I get this to
> work?
> 
> --
>  _
> /-\ ndrew
> andrew at pure-wireless.net
> http://www.pure-wireless.net
> 
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
> 


-- 
-- 
Regards,
Punky
P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com) 

Voyage Linux
(http://www.voyage.hk/software/voyage.html)