[Voyage-linux] Voyage Not Booting

Andrew Niemantsverdriet (spam-protected)
Wed Mar 9 12:03:36 HKT 2005


Hi Punky,

I selected module 1 for WRAP when I ran voyage update script. Using
minicom (9600 8N1 No Flow control) here is the output:

PC Engines WRAP.2B/2C v1.04
640 KB Base Memory
64512 KB Extended Memory
                                                                                                                             
01F0 Master 848A TOSHIBA THNCF128MMA
Phys C/H/S 978/8/32 Log C/H/S 978/8/32
                                                                                                                             
LI
LILLOO  --  KKeeyyttaabbllee  rreeaadd//cchheecckkssuumm  eerrrroorr


No dchp lease is obtained so ssh is not an option. So judging from that
it looks like a bad flash write. Any ideas on how to get it working?

Thanks,

--
 _
/-\ ndrew

On Tue, 2005-03-08 at 18:26, Punky Tse wrote:
> Andrew,
> 
> What module did you select when you run voyage.update?  I think you
> should have pressed "1" for wrap.  There are some options for you to
> verify what went wrong.
> 
> - Use minicom in Fedora 2 instead of hyper terminal, which I have no
> experience before
> - If the wrap is connected to eth0 and can obtain IP through DHCP from
> it.  After you boot wrap up one minute, you should be able to login
> the board with ssh.
> - send the hyper terminal output to this list may help identify what's wrong.
> 
> On Tue, 08 Mar 2005 11:07:14 -0700, Andrew Niemantsverdriet
> <andrew at pure-wireless.net> wrote:
> > Now I can not get Voyage to boot. I have a wrap 2.c hooked up to a
> > windows xp machine via a null modem cable. I have hyper terminal setup
> > like 9600 8-N-1 Flow Control = none. I have changed the wrap boards bios
> > to be 9600 as well.
> > 
> > When I initally plug the board in I see the bios messages come across
> > the screen then the messages stop after printing a capital L . I can not
> > type any commands or anything.
> > 
> > Was it a bad write? Do I have settings wrong? How can I get this to
> > work?
> > 
> > --
> >  _
> > /-\ ndrew
> > andrew at pure-wireless.net
> > http://www.pure-wireless.net
> > 
> > _______________________________________________
> > Voyage-linux mailing list
> > Voyage-linux at list.voyage.hk
> > http://list.voyage.hk/mailman/listinfo/voyage-linux
> > 
> 
> 
> -- 





More information about the Voyage-linux mailing list