[Voyage-linux] ifdown/ifup on ath0 causes WRAP to reboot

[Edwin Whitelaw]

Punky,

Thanks for the reply.

Kim-man "Punky" TSE wrote:
> Hi Edwin,
>
> Tried you config and does exhibit your reboot problem.  Do you see 
> kernel panic message in the serial console?  If not, I think it is 
> probably relates to power issues.  Check your PSU unit, or check your 
> WRAP board if it has 8 capacitors?
The system was ethernet only connected at the time so I couldn't see the 
kernel messages.  Will connect a console and see.  This is a new WRAP 
with 8 elcos, an 18v power supply directly connected and only 1 SR5 in 
it.  I would be surprised if this were power related.  It's my 
understanding the maximum load really only occurs when the radio is 
actually txmitting.?
>
> See this: http://madwifi.org/wiki/UserDocs/WRAP
I am familiar with the ECN.  Thx.
>
> - Punky
>
> Edwin Whitelaw wrote:
>> WRAP2C with 0.2 voyage + apt-get upgrade using default sources.list 
>> file.  Tried SR5, CM9 and EMP8602 radios with identical results.  
>> Also switched WRAP boards with no change.
>>
>> If I run ifdown ath0 followed by ifup ath0 the system always reboots.
>>
>> Anyone have any thoughts on why this is happening?  I have other 
>> boards that dont' exhibit this behavior.
>>
>> Thx,
>>
>> Edwin
>>
>> -----------
>> voyage:~# cat /etc/network/interfaces
>> # Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
>> # /usr/share/doc/ifupdown/examples for more information.
>> auto lo
>> iface lo inet loopback
>>
>> auto eth0
>> iface eth0 inet dhcp
>> #iface eth0 inet static
>> #       address 10.220.204.1
>> #       netmask 255.255.255.0
>> #       broadcast 10.220.204.255
>>
>> auto ath0
>> iface ath0 inet static
>>        address 10.220.4.1
>>        netmask 255.255.255.0
>>        broadcast 10.220.4.255
>>        #pre-up wlanconfig ath create wlandev wifi0 wlanmode ap
>>         madwifi-base wifi0
>>         wireless-mode Master
>>         wireless-essid crc-peak
>>         wireless-channel 149
>>         wireless-rate 24M
>>        up iwconfig ath0 txpower 26db
>>        down wlanconfig ath0 destroy
>> -----
>> Comment:  using "wireless-txpower 26db" does *not* work while "up 
>> iwconfig ath0 txpower 26db" does.  ???
>>
>> ----------
>> voyage:~# ifdown ath0
>> run-parts: /etc/network/if-down.d/0_wpasupplicant exited with return 
>> code 1
>> ath0: ERROR while getting interface flags: No such device
>> voyage:~# ifup ath0
>> run-parts: /etc/network/if-pre-up.d/0_wpasupplicant exited with 
>> return code 1
>> .
>> .
>> system is rebooting at this point
>> .
>> .
>> login as: root
>>
>> everything is back to normal.
>>
>
>

-- 
<=+=+=+==+=+=+==+=+=+=+=+=+=+=+=>
Edwin Whitelaw, P.E.
New River Valley Unwired, LLC
2200 Lonesome Dove Dr
Christiansburg, VA 24073
540-239-0318