[Voyage-linux] WPA support on Prism

[Keith Cheung]

Hi Punky,
   
  I have encountered problem when running hostapd on Prism wireless card, but it is ok for Atheros. Same client access the WRAP (voyage-0.2) with prism and atheros. The hostapd.conf file is as follows:
   
  interface=ath0
driver=madwifi
  # interface=wlan0
  # driver=hostap
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=3
debug=0
dump_file=/tmp/hostapd-ath2.dump
ssid=IT-GUESTS
macaddr_acl=0
auth_algs=3
wpa=1
wpa_passphrase=foobarrr
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
wpa_group_rekey=600
wpa_gmk_rekey=86400

  The hostap info found in "dmesg"
  hostap_pci: 0.4.4-kernel (Jouni Malinen <jkmaline at cc.hut.fi>)
hostap_pci: Registered netdevice wifi0

  And the latest stable release of hostap driver in http://hostap.epitest.fi/ is 0.4.7. Is this the problem cause ? If yes, any idea how to fix. Thanks in advance.
   
  Regards,
  Keith

_______________________________________
 YM - 離線訊息
 就算你沒有上網，你的朋友仍可以留下訊息給你，當你上網時就能立即看到，任何說話都冇走失。
 http://messenger.yahoo.com.hk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20060426/1916d701/attachment-0001.html>