[Voyage-linux] WPA support on Prism

[Kim-man "Punky" TSE]

Hi,

One Prism 2.5 and one Atheros interface, both runs in master mode and
need WPA support? You need to run two hostapd instances by supplying
different hostapd.conf for each interface.

Punky

Keith Cheung wrote:
> Hi Punky,
> I have encountered problem when running hostapd on Prism wireless
> card, but it is ok for Atheros. Same client access the WRAP
> (voyage-0.2) with prism and atheros. The hostapd.conf file is as follows:
> interface=ath0
> driver=madwifi
> # interface=wlan0
> # driver=hostap
> logger_syslog=-1
> logger_syslog_level=2
> logger_stdout=-1
> logger_stdout_level=3
> debug=0
> dump_file=/tmp/hostapd-ath2.dump
> ssid=IT-GUESTS
> macaddr_acl=0
> auth_algs=3
> wpa=1
> wpa_passphrase=foobarrr
> wpa_key_mgmt=WPA-PSK
> wpa_pairwise=TKIP
> wpa_group_rekey=600
> wpa_gmk_rekey=86400
> The hostap info found in "dmesg"
> hostap_pci: 0.4.4-kernel (Jouni Malinen <jkmaline at cc.hut.fi
> <mailto:jkmaline at cc.hut.fi>>)
> hostap_pci: Registered netdevice wifi0
> And the latest stable release of hostap driver in
> http://hostap.epitest.fi/ is 0.4.7. Is this the problem cause ? If
> yes, any idea how to fix. Thanks in advance.
> Regards,
> Keith
>
> _______________________________________
> YM - 離線訊息
> 就算你沒有上網，你的朋友仍可以留下訊息給你，當你上網時就能立即看到，任
> 何說話都冇走失。
> http://messenger.yahoo.com.hk
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>   


-- 
Regards,
Punky
P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

Voyage Linux
(http://www.voyage.hk/software/voyage.html)