[Voyage-linux] help

[Kim-man "Punky" TSE]

Hi Jeffery:

pre-up line should be removed.

Regards,
Punky

jeffery at martcoinc.com wrote:
> Voyage team,
>  
>  
>    My name is Jeff Rager. I am trying to bring up a dual radio AP 
> using Voyage .3pre1. I have not gotten any errors while configuring 
> ath0 for master mode but, there's nothing there when I try look for it 
> with my laptop. Here is my config.
>  
>  
> auto ath0
>     iface ath0 inet static
>         address 192.168.1.15
>         netmask 255.255.255.0
>         broadcast 10.1.10.255
>         gateway 192.168.1.254
>         pre-up wlanconfig ath0 create wlandev wifi0 wlanmode ap
>         madwifi-base wifi0
>         wireless-mode Master
>         up iwpriv ath0 mode 3
>         up iwconfig ath0 mode master
>         up iwconfig ath0 essid voyage
>         up iwconfig ath0 txpower auto
>         up iwconfig ath0 enc off
>         up iwconfig ath0 rate auto
>         up nat.sh ath0 eth0 "192.168.1.14/24"
>  
> I don't know why the pre-up line is in there but, it was there by default.
>  
>  
> Thanks in advance
> Jeff
> ------------------------------------------------------------------------
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
>   


-- 
 

P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - New stock for Senao NMP8601 and NMP8602 (100mW)!
      - New low price for Senao NMP-8602 Plus (400mW)!