Re-2: [Voyage-linux] help

[Kim-man "Punky" TSE]

Hi  Jeffery,

I just got a 0.3pre1 running on WRAP board.  I just remove some of the # 
in the lines.  and here is my config.

auto ath0
iface ath0 inet static
        address 10.1.20.1
        netmask 255.255.255.0
        broadcast 10.1.20.255
#        #pre-up wlanconfig ath create wlandev wifi1 wlanmode ap
         madwifi-base wifi0
         wireless-mode Master
#         wireless-mode Adhoc
#         wireless-mode Managed
        up iwpriv ath0 mode 3
        up iwconfig ath0 mode master
        up iwconfig ath0 essid voyage
        up iwconfig ath0 txpower auto
        up iwconfig ath0 enc off
        up iwconfig ath0 rate auto
        up nat.sh ath0 eth0 "10.1.20.0/24"


jeffery at martcoinc.com wrote:
> Punky,
>
>
>     Thanks for your quick response but, I have already tried commenting that line out and now removed it. No success.
> Let me give some more details of what I have running.
>
> 1.Flex ATX M/B
> 2.Routerboard 14 mini-pci to pci adapter
> 3.Two Wistron Neweb CM9 (5213 chipset)
> 4.Voyage .3pre1.
> 4.ath0 in master mode.
>
>
> I have not set up ath1 yet, trying to get ath0 as an ap first. I have tried everything that I can find in any all and  forums relating to iwconfig, iwpriv, wlanconfig so on and so forth. If you could give any direction to get the card working in master mode so that I can connect to it that would be great. I don't know what other info I could give you to help you help me. If any, let me know.
>
> Thanks again,
> Jeff
>
> -------- Original Message --------
> Subject: Re: [Voyage-linux] help (30-Nov-2006 22:21)
> From:    punkytse at punknix.com
> To:      jeffery at martcoinc.com
>
>   
>> Hi Jeffery:
>>
>> pre-up line should be removed.
>>
>> Regards,
>> Punky
>>
>> jeffery at martcoinc.com wrote:
>>     
>>> Voyage team,
>>>  
>>>  
>>>    My name is Jeff Rager. I am trying to bring up a dual radio AP 
>>> using Voyage .3pre1. I have not gotten any errors while configuring 
>>> ath0 for master mode but, there's nothing there when I try look for it 
>>> with my laptop. Here is my config.
>>>  
>>>  
>>> auto ath0
>>>     iface ath0 inet static
>>>         address 192.168.1.15
>>>         netmask 255.255.255.0
>>>         broadcast 10.1.10.255
>>>         gateway 192.168.1.254
>>>         pre-up wlanconfig ath0 create wlandev wifi0 wlanmode ap
>>>         madwifi-base wifi0
>>>         wireless-mode Master
>>>         up iwpriv ath0 mode 3
>>>         up iwconfig ath0 mode master
>>>         up iwconfig ath0 essid voyage
>>>         up iwconfig ath0 txpower auto
>>>         up iwconfig ath0 enc off
>>>         up iwconfig ath0 rate auto
>>>         up nat.sh ath0 eth0 "192.168.1.14/24"
>>>  
>>> I don't know why the pre-up line is in there but, it was there by default.
>>>  
>>>  
>>> Thanks in advance
>>> Jeff
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Voyage-linux mailing list
>>> Voyage-linux at list.voyage.hk
>>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>>   
>>>       
>> -- 
>>  
>>
>> P U N K N ! X  . c o m
>> Technology + Lifestyle
>> (http://www.punknix.com)
>>
>> V O Y A G E . H K - http://www.voyage.hk
>> Linux - voyage-0.2 is released!
>> Store - New stock for Senao NMP8601 and NMP8602 (100mW)!
>>       - New low price for Senao NMP-8602 Plus (400mW)!
>>
>>
>> To: jeffery at martcoinc.com
>> Cc: voyage-linux at voyage.hk
>>     
> ******************************************************************
> Jeffery Rager - Martco, Inc.
> Phone 502-635-1600 x 153, Fax 502-635-8058
> Email jeffery at martcoinc.com
> Quality CCTV Products and Services!
> ******************************************************************
>
>   


-- 
 

P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - New stock for Senao NMP8601 and NMP8602 (100mW)!
      - New low price for Senao NMP-8602 Plus (400mW)!