Re-2: [Voyage-linux] help

[Kim-man "Punky" TSE]

Default is channel 1.  add

    up iwconfig ath0 channel 5

in-between one of the "up" lines should do.

Cool/Explosion wrote:
> Hi Punky,
> in your config i don't see parametr for channel, how do you setting 
> channels?
>
> I try:
> up iwconfig ath0 channel 5
> and
> re-up wlanconfig ath0 create wlandev wifi0 wlanmode ap channel 5
>
> bud it doesn't work, than i must give parametr to CRON, but it isn't 
> the best way...
>
>
>
> Kim-man "Punky" TSE napsal(a):
>> Hi  Jeffery,
>>
>> I just got a 0.3pre1 running on WRAP board.  I just remove some of 
>> the # in the lines.  and here is my config.
>>
>> auto ath0
>> iface ath0 inet static
>>        address 10.1.20.1
>>        netmask 255.255.255.0
>>        broadcast 10.1.20.255
>> #        #pre-up wlanconfig ath create wlandev wifi1 wlanmode ap
>>         madwifi-base wifi0
>>         wireless-mode Master
>> #         wireless-mode Adhoc
>> #         wireless-mode Managed
>>        up iwpriv ath0 mode 3
>>        up iwconfig ath0 mode master
>>        up iwconfig ath0 essid voyage
>>        up iwconfig ath0 txpower auto
>>        up iwconfig ath0 enc off
>>        up iwconfig ath0 rate auto
>>        up nat.sh ath0 eth0 "10.1.20.0/24"
>>
>>
>> jeffery at martcoinc.com wrote:
>>> Punky,
>>>
>>>
>>>     Thanks for your quick response but, I have already tried 
>>> commenting that line out and now removed it. No success.
>>> Let me give some more details of what I have running.
>>>
>>> 1.Flex ATX M/B
>>> 2.Routerboard 14 mini-pci to pci adapter
>>> 3.Two Wistron Neweb CM9 (5213 chipset)
>>> 4.Voyage .3pre1.
>>> 4.ath0 in master mode.
>>>
>>>
>>> I have not set up ath1 yet, trying to get ath0 as an ap first. I 
>>> have tried everything that I can find in any all and  forums 
>>> relating to iwconfig, iwpriv, wlanconfig so on and so forth. If you 
>>> could give any direction to get the card working in master mode so 
>>> that I can connect to it that would be great. I don't know what 
>>> other info I could give you to help you help me. If any, let me know.
>>>
>>> Thanks again,
>>> Jeff
>>>
>>> -------- Original Message --------
>>> Subject: Re: [Voyage-linux] help (30-Nov-2006 22:21)
>>> From:    punkytse at punknix.com
>>> To:      jeffery at martcoinc.com
>>>
>>>  
>>>> Hi Jeffery:
>>>>
>>>> pre-up line should be removed.
>>>>
>>>> Regards,
>>>> Punky
>>>>
>>>> jeffery at martcoinc.com wrote:
>>>>   
>>>>> Voyage team,
>>>>>  
>>>>>  
>>>>>    My name is Jeff Rager. I am trying to bring up a dual radio AP 
>>>>> using Voyage .3pre1. I have not gotten any errors while 
>>>>> configuring ath0 for master mode but, there's nothing there when I 
>>>>> try look for it with my laptop. Here is my config.
>>>>>  
>>>>>  
>>>>> auto ath0
>>>>>     iface ath0 inet static
>>>>>         address 192.168.1.15
>>>>>         netmask 255.255.255.0
>>>>>         broadcast 10.1.10.255
>>>>>         gateway 192.168.1.254
>>>>>         pre-up wlanconfig ath0 create wlandev wifi0 wlanmode ap
>>>>>         madwifi-base wifi0
>>>>>         wireless-mode Master
>>>>>         up iwpriv ath0 mode 3
>>>>>         up iwconfig ath0 mode master
>>>>>         up iwconfig ath0 essid voyage
>>>>>         up iwconfig ath0 txpower auto
>>>>>         up iwconfig ath0 enc off
>>>>>         up iwconfig ath0 rate auto
>>>>>         up nat.sh ath0 eth0 "192.168.1.14/24"
>>>>>  
>>>>> I don't know why the pre-up line is in there but, it was there by 
>>>>> default.
>>>>>  
>>>>>  
>>>>> Thanks in advance
>>>>> Jeff
>>>>> ------------------------------------------------------------------------ 
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Voyage-linux mailing list
>>>>> Voyage-linux at list.voyage.hk
>>>>> http://list.voyage.hk/mailman/listinfo/voyage-linux
>>>>>         
>>>> -- 
>>>>  
>>>>
>>>> P U N K N ! X  . c o m
>>>> Technology + Lifestyle
>>>> (http://www.punknix.com)
>>>>
>>>> V O Y A G E . H K - http://www.voyage.hk
>>>> Linux - voyage-0.2 is released!
>>>> Store - New stock for Senao NMP8601 and NMP8602 (100mW)!
>>>>       - New low price for Senao NMP-8602 Plus (400mW)!
>>>>
>>>>
>>>> To: jeffery at martcoinc.com
>>>> Cc: voyage-linux at voyage.hk
>>>>     
>>> ******************************************************************
>>> Jeffery Rager - Martco, Inc.
>>> Phone 502-635-1600 x 153, Fax 502-635-8058
>>> Email jeffery at martcoinc.com
>>> Quality CCTV Products and Services!
>>> ******************************************************************
>>>
>>>   
>>
>>


-- 
 

P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.2 is released!
Store - New stock for Senao NMP8601 and NMP8602 (100mW)!
      - New low price for Senao NMP-8602 Plus (400mW)!