[Voyage-linux] Entry for ath_pci is missing in modules.pcimap after kernel upgrade

[Punky Tse]

Nicklas,

Do you build your own kernel or using the standard voyage kernel?  Looks 
like you are building the kernel.

Doesn't the following instruction work for you?
http://wiki.voyage.hk/dokuwiki/doku.php?id=how_to_set_country_code_for_madwifi_device

If you need some kernel features that is yet in standard voyage kernel, 
please send your request to this list.  If it is not too hard, I will 
probably include it in later release.

Punky

Nicklas Blidmo wrote:

> After upgrading to a new kernel I'm not able to do a modprobe ath_pci 
> anymore, even though this driver is successfully loaded at boot time. 
> I have understood that this is because ath_pci is missing in 
> /lib/modules/2.6.14_my_kernel/modules.pcimap. it is present in 
> 2.6.8-486-voyage/modules.pcimap.
>
> Have I missed something when upgrading the kernel?
> I need to fix this to be able to change country code.
>
> Thanks in advance
>
> Nicklas Blidmo
>
> ****** boot messages below ****
>
> ath_hal: 0.9.14.9 <http://0.9.14.9> (AR5210, AR5211, AR5212, RF5111, 
> RF5112, 
> RF2413)                                                                 
> ath_rate_sample: 1.2                   
> ath_pci: 0.9.6.0 <http://0.9.6.0> 
> (EXPERIMENTAL)                              
> Build date: Dec              
> Debugging version (IEEE80211)                            
> ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 
> 54Mbps                                                                      
>
> ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 
> 11Mbps                                          
> ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 
> 24Mbps 
> 36M                                                                                
>
> bps 48Mbps 54Mbps                
> ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 
> 54Mbps                                                                         
>
> ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 
> 54Mbps                                                                         
>
> ath0: H/W encryption support: WEP AES AES_CCM 
> TKIP                                                 
> ath0: mac 5.9 phy 4.3 radio 3.6                              
> ath0: Use hw queue 1 for WME_AC_BE 
> traffic                                       
> ath0: Use hw queue 0 for WME_AC_BK 
> traffic                                         
> ath0: Use hw queue 2 for WME_AC_VI 
> traffic                                         
> ath0: Use hw queue 3 for WME_AC_VO 
> traffic                                         
> ath0: Use hw queue 8 for CAB traffic                                   
> ath0: Use hw queue 9 for beacons                               
> Debugging version (ATH)                      
> ath0: Atheros 5212: mem=0x80080000, 
> irq=9                                        
> wlan: 0.8.6.0 <http://0.8.6.0> (EXPERIMENTAL)                           
> wlan: mac acl policy registered  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Voyage-linux mailing list
>Voyage-linux at list.voyage.hk
>http://list.voyage.hk/mailman/listinfo/voyage-linux
>  
>


-- 
Regards,
Punky
P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

Voyage Linux
(http://www.voyage.hk/software/voyage.html)