[Voyage-linux] Entry for ath_pci is missing in modules.pcimap after kernel upgrade

[Nicklas Blidmo]

After upgrading to a new kernel I'm not able to do a modprobe ath_pci
anymore, even though this driver is successfully loaded at boot time. I have
understood that this is because ath_pci is missing in
/lib/modules/2.6.14_my_kernel/modules.pcimap. it is present in
2.6.8-486-voyage/modules.pcimap.

Have I missed something when upgrading the kernel?
I need to fix this to be able to change country code.

Thanks in advance

Nicklas Blidmo

****** boot messages below ****

ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413)
ath_rate_sample: 1.2
ath_pci: 0.9.6.0 (EXPERIMENTAL)
Build date: Dec
Debugging version (IEEE80211)
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36M

bps 48Mbps 54Mbps
ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
54Mbps

ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps
54Mbps

ath0: H/W encryption support: WEP AES AES_CCM
TKIP
ath0: mac 5.9 phy 4.3 radio 3.6
ath0: Use hw queue 1 for WME_AC_BE
traffic
ath0: Use hw queue 0 for WME_AC_BK
traffic
ath0: Use hw queue 2 for WME_AC_VI
traffic
ath0: Use hw queue 3 for WME_AC_VO
traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
Debugging version (ATH)
ath0: Atheros 5212: mem=0x80080000,
irq=9
wlan: 0.8.6.0 (EXPERIMENTAL)
wlan: mac acl policy registered
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.voyage.hk/pipermail/voyage-linux/attachments/20060111/d3156542/attachment-0001.html>