[Voyage-linux] eth0 does not exist

[Mike R]

I too have been having this issue.

Since it wasn't stated I'm going to assume the people with this issue are
also using WRAP boards or at very least boards with the National
Semiconductor DP8381x ethernet on.

I have an old image of meshnode I've tested on the boards, no problems
besides everything being ancient.  The latest voyage eth0 works on one and
doesn't on the other.  Looking at lsmod it loads the module and I can see
load it on the console at the boot time.  However it doesn't see by the time
it gets around to the network setup.

Looking at the networking chip on the 2 boards themselves gives a little
information:
Both chips are labeled: DP83816AVNG
The working chip has an additional label of: VM552RR
The non-working chip has an additional label of: VM612RD

I'm guessing something changed in the DP8381x driver which may have broken
something for the newer chips.


-----Original Message-----
From: voyage-linux-bounces+miker=rockisland.com at list.voyage.hk
[mailto:voyage-linux-bounces+miker=rockisland.com at list.voyage.hk] On Behalf
Of Roberto Riggio
Sent: Wednesday, April 18, 2007 7:25 AM
To: jeffery at martcoinc.com
Cc: voyage-linux at voyage.hk
Subject: Re: [Voyage-linux] eth0 does not exist


Hi, 

I'm having the same issue. The strange thing is that I have four 
node and eth0 works only in one node (using the same CF).

Roberto

----- Original Message -----
From: jeffery at martcoinc.com
To: voyage-linux at voyage.hk
Sent: Wednesday, April 18, 2007 3:49:09 PM GMT+0100 Europe/Berlin
Subject: [Voyage-linux] eth0 does not exist


Hi all,


    I all of a sudden got this message on boot up and now I can not ping
through the br0 which is ath0 and eth0. It says that eth0 does not exist.
Any help would be appreciated.




Thanks,
Jeff Rager
******************************************************************
Jeffery Rager - Martco, Inc.
Phone 502-635-1600 x 153, Fax 502-635-8058
Email jeffery at martcoinc.com
Quality CCTV Products and Services!
******************************************************************


-- 
--------------------------------------------------------
Roberto Riggio
CREATE-NET
PhD Student

Via Solteri, 38 - 38100 Trento - Italy
e-mail: roberto.riggio at create-net.org

Tel: (+39) 0461 408400 - interno/extension 708
Fax: (+39) 0461 421157

 http://www.create-net.org/
--------------------------------------------------------

The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited according to the
Italian Law 196/2003 of the Legislature.  If you received this in error,
please contact the sender and delete the material from any computer.


_______________________________________________
Voyage-linux mailing list
Voyage-linux at list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux