AW: [Voyage-linux] eth0 does not exist

[Hofer, Hermann]

Hi Punky,

I believe this is the best solution. At the moment I delete the file 'z25_persistent-net.rules' every time a cf-card is copyied.

If a MAC-to-ifname solution is really needed I think this can be relized with mappings in the interfaces file.

Regards,
 Hermann

-----Ursprüngliche Nachricht-----
Von: voyage-linux-bounces+h.hofer=ahsnet.de at list.voyage.hk [mailto:voyage-linux-bounces+h.hofer=ahsnet.de at list.voyage.hk] Im Auftrag von Kim-man 'Punky' TSE
Gesendet: Montag, 23. April 2007 11:43
An: William M. Brack
Cc: voyage-linux at voyage.hk
Betreff: Re: [Voyage-linux] eth0 does not exist

Hi Bill and all,

I seems that the udev problem affect many of the users, especially they 
tested in one box and transfer the CF to another.  I didn't experience 
this problem before as these days tested voyage using PXE install and 
configure the box without transferring the CF cards.

So anyone has discovered a reasonable solution for it?  I am now 
thinking about regenerating 25_persistent-net.rules everytime it boots.

Regards,
Punky

William M. Brack wrote:
> I had a similar problem on my WRAP board, and chased it down to udev,
> with a file at /etc/udev/rules.d/z25_persistent-net.rules which was
> changing the name of the interface from eth0 to eth3.  I haven't yet
> figured out when that file got created (it apparently wasn't on the
> original distribution), but editing the file fixed the problem for me.
>
> Bill
>
>   
>


-- 
Regards,
Punky

P U N K N ! X  . c o m
Technology + Lifestyle
(http://www.punknix.com)

V O Y A G E . H K - http://www.voyage.hk
Linux - voyage-0.3 is released!
Store - New Senao NMP-8601 and NMP-8602 (100mW) in stock!
      - New low price for Senao NMP-8602 Plus (400mW)! 


_______________________________________________
Voyage-linux mailing list
Voyage-linux at list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux