[Voyage-linux] problem with alix2b
mbartolo
(spam-protected)
Tue Oct 9 17:40:13 HKT 2007
Hi,
Have try somebody boot kernel from voyage 0.4.1 on alix2b board with updated
BIOS to v0.92 ?
I try it but loading of kernel stops (maybe I'am wrong with some option which
I compiled to kernel). In the attachment is output from kernel which boot on
alix2b board and on alix1c board. When I compare it - it seem to be
geode-mfgpt problem - but how can i disable it in this kernel ?
And how can I verify which version of BIOS I have on alix2b board ?
I flash right one from PC engines site , but I want be sure.
Thanks for any advise
Mike
-------------- next part --------------
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/2620m_tproxy root=/dev/hda2 console=ttyS0,38400n8
[Linux-bzImage, setup=0x1400, size=0xfbe30]
Linux version 2.6.20.3-ubuntu1 (root at dev1.scomd.net) (gcc version 3.4.6 (Debian 3.4.6-5)) #11 Mon Oct 8 14:20:06 GMT 2007 ()
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009e800 end: 000000000009e800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009e800 size: 0000000000001800 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000000f6b0000 end: 000000000f7b0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000f7b0000 size: 0000000000003000 end: 000000000f7b3000 type: 4
copy_e820_map() start: 000000000f7b3000 size: 000000000000d000 end: 000000000f7c0000 type: 3
copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7b0000 (usable)
BIOS-e820: 000000000f7b0000 - 000000000f7b3000 (ACPI NVS)
BIOS-e820: 000000000f7b3000 - 000000000f7c0000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
247MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 63408
early_node_map[1] active PFN ranges
0: 0 -> 63408
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 0f7c0000:f0830000)
Detected 498.075 MHz processor.
Built 1 zonelists. Total pages: 62913
Kernel command line: root=/dev/hda2 console=ttyS0,38400n8
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 248760k/253632k available (1312k kernel code, 4312k reserved, 507k data, 148k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffbb000 - 0xfffff000 ( 272 kB)
vmalloc : 0xd0000000 - 0xfffb9000 ( 767 MB)
lowmem : 0xc0000000 - 0xcf7b0000 ( 247 MB)
.init : 0xc02ca000 - 0xc02ef000 ( 148 kB)
.data : 0xc024823e - 0xc02c7174 ( 507 kB)
.text : 0xc0100000 - 0xc024823e (1312 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 996.92 BogoMIPS (lpj=498464)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
Remapping vsyscall page to ffffe000
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfaaf0, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.1
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
geode-mfgpt: 6 timers available.
io scheduler noop registered
io scheduler anticipatory registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
eth0: VIA Rhine III (Management Adapter) at 0xeffff000, 00:0d:b9:0c:d2:b4, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0081.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
hda: KINGSTON, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 1014048 sectors (519 MB) w/1KiB Cache, CHS=1006/16/63, DMA
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 148k freed
input: AT Translated Set 2 keyboard as /class/input/input0
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevdudevd[784]: main: the kernel does not support inotify, udevd can't monitor configuration file changes
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.5: irq 5, io mem 0xefffe000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
done.
Activating swap...done.
EXT3 FS on hda2, internal journal
/etc/rcS.d/S11hwclock.sh: line 51: /etc/adjtime: No such file or directory
Setting the system clock..
Cleaning up ifupdown....
Loading kernel modules...done.
Loading device-mapper supportdevice-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel at redhat.com
.
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
done.
Setting kernel variables...done.
Mounting local filesystems...EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
/etc/rcS.d/S55bootmisc.sh: line 49: savelog: command not found
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
* Not starting internet superserver: no services enabled.
Starting OpenBSD Secure Shell server: sshd.
Starting /usr/sbin/led_d-wrap: done
Starting periodic command scheduler: crond.
Starting watchdog daemon: watchdog.
eth0: link up, 100Mbps, half-duplex, lpa 0x0081
.
Remounting / as read-write ... Done.
Removing /etc/nologin ... Done.
Remounting / as read-only ... Done.
Starting watchdog daemon:
Debian GNU/Linux 4.0 sc ttyS0
sc login: bridge0: topology change detected, propagating
bridge0: port 1(eth0) entering forwarding state
Debian GNU/Linux 4.0 sc ttyS0
sc login:
Debian GNU/Linux 4.0 sc ttyS0
sc login:
-------------- next part --------------
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/2620m_tproxy root=/dev/hda2 console=ttyS0,38400n8
[Linux-bzImage, setup=0x1400, size=0xfb730]
Linux version 2.6.20.3-ubuntu1 (root at dev1.scomd.net) (gcc version 3.4.6 (Debian 3.4.6-5)) #10 Mon Oct 8 12:52:11 GMT 2007 ()
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000000ff00000 end: 0000000010000000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
256MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 65536
early_node_map[1] active PFN ranges
0: 0 -> 65536
DMI not present or invalid.
Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
Detected 498.056 MHz processor.
Built 1 zonelists. Total pages: 65024
Kernel command line: root=/dev/hda2 console=ttyS0,38400n8
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 257344k/262144k available (1307k kernel code, 4376k reserved, 508k data, 148k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffbb000 - 0xfffff000 ( 272 kB)
vmalloc : 0xd0800000 - 0xfffb9000 ( 759 MB)
lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
.init : 0xc02ca000 - 0xc02ef000 ( 148 kB)
.data : 0xc0246dd8 - 0xc02c6174 ( 508 kB)
.text : 0xc0100000 - 0xc0246dd8 (1307 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 996.94 BogoMIPS (lpj=498470)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
Remapping vsyscall page to ffffe000
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfcbad, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Device 0000:00:01.2 not found by BIOS
PCI: Device 0000:00:0f.2 not found by BIOS
PCI: Device 0000:00:0f.3 not found by BIOS
PCI: Device 0000:00:0f.4 not found by BIOS
PCI: Device 0000:00:0f.5 not found by BIOS
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
More information about the Voyage-linux
mailing list