[Voyage-linux] S99voyage-util: line 34: /sys/class/leds/wrap:error/trigger: No such file or directory

Wed Apr 16 03:27:10 HKT 2008

I'm trying to work with my new ALIX2C3, running Voyage 0.5.  I was told 
that this is specially developed for ALIX and Soekris boards, so I'm 
hopeful...

Anyway, I've installed and gotten things to boot, getting past the 
serial console vs VGA problem and making sure I was booting off the 
right device.  Now I'm getting hung up on the startup scripts - in 
particular, the error in the subject line.

It's true - that file doesn't exist.  Indeed, there is NOTHING in the 
/sys directory, as far as I can tell.  I realise this may be populated 
dynamically at runtime and I may not see it when taking the CF card over 
to another machine.

Any thoughts on how to address this?  For what it's worth, the full 
boot-up dump is below.  Thanks in advance!

  -Don

p.s. the ethernet ports aren't hooked up yet.

PC Engines ALIX.2 v0.99
640 KB Base Memory
261120 KB Extended Memory

01F0 Master 848A SanDisk SDCFJ-1024
Phys C/H/S 1986/16/63 Log C/H/S 993/32/63

EXTLINUX 3.11 2005-09-02 CBIOS Copyright (C) 1994-2005 H. Peter Anvin
boot:
Loading /boot/vmlinuz-2.6.23-486-voyage.........................
Loading /boot/initrd.img-2.6.23-486-voyage..................................
Ready.
Linux version 2.6.23-486-voyage (2.6.23-2) (root at punknix-uml) (gcc 
version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Thu 
Feb 28 17:11:14 GMT 2008
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
256MB LOWMEM available.
Zone PFN ranges:
   DMA             0 ->     4096
   Normal       4096 ->    65536
   HighMem     65536 ->    65536
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
     0:        0 ->    65536
DMI not present or invalid.
Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
Built 1 zonelists in Zone order.  Total pages: 65024
Kernel command line: initrd=/boot/initrd.img-2.6.23-486-voyage 
root=/dev/hda1 ro console=ttyS0,38400n8 
BOOT_IMAGE=/boot/vmlinuz-2.6.23-486-voyage
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 498.048 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 254636k/262144k available (1761k kernel code, 7036k reserved, 
634k data, 164k init, 0k highmem)
virtual kernel memory layout:
     fixmap  : 0xfffac000 - 0xfffff000   ( 332 kB)
     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
     vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
       .init : 0xc035a000 - 0xc0383000   ( 164 kB)
       .data : 0xc02b87d1 - 0xc035719c   ( 634 kB)
       .text : 0xc0100000 - 0xc02b87d1   (1761 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 997.07 BogoMIPS 
(lpj=498535)
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
geode:  8 MFGPT timers available.
PCI: PCI BIOS revision 2.10 entry at 0xfcd03, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
SCSI subsystem initialized
PCI: Probing PCI hardware
Time: tsc clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2001k freed
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD5536: IDE controller at PCI slot 0000:00:0f.2
AMD5536: chipset revision 1
AMD5536: not 100% native mode: will probe irqs later
AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
     ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
hda: SanDisk SDCFJ-1024, CFA DISK drive
Clocksource tsc unstable (delta = 130886753 ns)
Time: pit clocksource has been installed.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63, DMA
  hda: hda1
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
padlock: VIA PadLock not detected.
padlock: VIA PadLock Hash Engine not detected.
geode-aes: GEODE AES engine enabled.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 164k freed
Loading, please wait...
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
eth0: VIA Rhine III (Management Adapter) at 0xe0000000, 
00:0d:b9:14:1c:58, IRQ 10.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth1: VIA Rhine III (Management Adapter) at 0xe0040000, 
00:0d:b9:14:1c:59, IRQ 11.
eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth2: VIA Rhine III (Management Adapter) at 0xe0080000, 
00:0d:b9:14:1c:5a, IRQ 12.
eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:00:0f.5: EHCI Host Controller
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local-premount ...
Done.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...done.
Activating swap...done.
/etc/rcS.d/S11hwclock.sh: line 51: /etc/adjtime: No such file or directory
Setting the system clock..
Cleaning up ifupdown....
Loading kernel modules...natsemi dp8381x driver, version 2.1, Sept 11, 2006
   originally by Donald Becker <becker at scyld.com>
   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
done.
Loading device-mapper supportdevice-mapper: ioctl: 4.11.0-ioctl 
(2006-10-12) initialised: dm-devel at redhat.com
.
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
done.
Setting kernel variables...done.
Mounting local filesystems...failed.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...Internet Software Consortium DHCP 
Client 2.0pl5
Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
All rights reserved.

Please contribute if you find this software useful.
For info, please visit http://www.isc.org/dhcp-contrib.html

eth0: link down
Listening on LPF/eth0/00:0d:b9:14:1c:58
Sending on   LPF/eth0/00:0d:b9:14:1c:58
Sending on   Socket/fallback/fallback-net
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
No DHCPOFFERS received.
No working leases in persistent database.

Exiting.

Failed to bring up eth0.
done.
Starting portmap daemon....
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting DNS forwarder and DHCP server: dnsmasqNET: Registered protocol 
family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
.
Starting portmap daemon...Already running..
Starting advanced IEEE 802.11 management: disabled via /etc/default/hostapd.
nocatsplash daemon disabled - read /etc/default/nocatsplash.
* Not starting internet superserver: no services enabled.
Starting PPTP Daemon: pptpd.
Starting OpenBSD Secure Shell server: sshd/var/run/sshd must be owned by 
root and not group or world-writable.
Starting periodic command scheduler: crond.
Starting watchdog daemon: watchdog.
Remounting / as read-write ... Done.
Removing /etc/nologin ... Done.
Remounting / as read-only ... Done.
/etc/rc2.d/S99voyage-util: line 34: /sys/class/leds/wrap:error/trigger: 
No such file or directory