[Voyage-linux] S99voyage-util: line 34: /sys/class/leds/wrap:error/trigger: No such file or directory
Kim-man 'Punky' TSE
(spam-protected)
Thu Apr 17 19:39:04 HKT 2008
Don,
What config of ALIX board (VGA and serial) do you have? And what
configuration you choose when you run voyage.update?
Regards,
Punky
Don Levey wrote:
> I'm trying to work with my new ALIX2C3, running Voyage 0.5. I was
> told that this is specially developed for ALIX and Soekris boards, so
> I'm hopeful...
>
> Anyway, I've installed and gotten things to boot, getting past the
> serial console vs VGA problem and making sure I was booting off the
> right device. Now I'm getting hung up on the startup scripts - in
> particular, the error in the subject line.
>
> It's true - that file doesn't exist. Indeed, there is NOTHING in the
> /sys directory, as far as I can tell. I realise this may be populated
> dynamically at runtime and I may not see it when taking the CF card
> over to another machine.
>
> Any thoughts on how to address this? For what it's worth, the full
> boot-up dump is below. Thanks in advance!
>
> -Don
>
> p.s. the ethernet ports aren't hooked up yet.
>
>
> PC Engines ALIX.2 v0.99
> 640 KB Base Memory
> 261120 KB Extended Memory
>
> 01F0 Master 848A SanDisk SDCFJ-1024
> Phys C/H/S 1986/16/63 Log C/H/S 993/32/63
>
> EXTLINUX 3.11 2005-09-02 CBIOS Copyright (C) 1994-2005 H. Peter Anvin
> boot:
> Loading /boot/vmlinuz-2.6.23-486-voyage.........................
> Loading
> /boot/initrd.img-2.6.23-486-voyage..................................
> Ready.
> Linux version 2.6.23-486-voyage (2.6.23-2) (root at punknix-uml) (gcc
> version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 PREEMPT Thu
> Feb 28 17:11:14 GMT 2008
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 256MB LOWMEM available.
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 65536
> HighMem 65536 -> 65536
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 65536
> DMI not present or invalid.
> Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
> Built 1 zonelists in Zone order. Total pages: 65024
> Kernel command line: initrd=/boot/initrd.img-2.6.23-486-voyage
> root=/dev/hda1 ro console=ttyS0,38400n8
> BOOT_IMAGE=/boot/vmlinuz-2.6.23-486-voyage
> No local APIC present or hardware disabled
> Initializing CPU#0
> PID hash table entries: 1024 (order: 10, 4096 bytes)
> Detected 498.048 MHz processor.
> Console: colour dummy device 80x25
> console [ttyS0] enabled
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 254636k/262144k available (1761k kernel code, 7036k reserved,
> 634k data, 164k init, 0k highmem)
> virtual kernel memory layout:
> fixmap : 0xfffac000 - 0xfffff000 ( 332 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
> lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
> .init : 0xc035a000 - 0xc0383000 ( 164 kB)
> .data : 0xc02b87d1 - 0xc035719c ( 634 kB)
> .text : 0xc0100000 - 0xc02b87d1 (1761 kB)
> Checking if this processor honours the WP bit even in supervisor
> mode... Ok.
> Calibrating delay using timer specific routine.. 997.07 BogoMIPS
> (lpj=498535)
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
> CPU: L2 Cache: 128K (32 bytes/line)
> Compat vDSO mapped to ffffe000.
> CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
> Checking 'hlt' instruction... OK.
> NET: Registered protocol family 16
> geode: 8 MFGPT timers available.
> PCI: PCI BIOS revision 2.10 entry at 0xfcd03, last bus=0
> PCI: Using configuration type 1
> Setting up standard PCI resources
> SCSI subsystem initialized
> PCI: Probing PCI hardware
> Time: tsc clocksource has been installed.
> NET: Registered protocol family 2
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 4, 65536 bytes)
> TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
> TCP: Hash tables configured (established 8192 bind 8192)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 2001k freed
> io scheduler noop registered
> io scheduler cfq registered (default)
> Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
> ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> AMD5536: IDE controller at PCI slot 0000:00:0f.2
> AMD5536: chipset revision 1
> AMD5536: not 100% native mode: will probe irqs later
> AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
> hda: SanDisk SDCFJ-1024, CFA DISK drive
> Clocksource tsc unstable (delta = 130886753 ns)
> Time: pit clocksource has been installed.
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: max request size: 128KiB
> hda: 2001888 sectors (1024 MB) w/1KiB Cache, CHS=1986/16/63, DMA
> hda: hda1
> i8042.c: No controller found.
> mice: PS/2 mouse device common for all mice
> padlock: VIA PadLock not detected.
> padlock: VIA PadLock Hash Engine not detected.
> geode-aes: GEODE AES engine enabled.
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI Shortcut mode
> Freeing unused kernel memory: 164k freed
> Loading, please wait...
> Begin: Loading essential drivers... ...
> Done.
> Begin: Running /scripts/init-premount ...
> via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
> eth0: VIA Rhine III (Management Adapter) at 0xe0000000,
> 00:0d:b9:14:1c:58, IRQ 10.
> eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link
> 0000.
> eth1: VIA Rhine III (Management Adapter) at 0xe0040000,
> 00:0d:b9:14:1c:59, IRQ 11.
> eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link
> 0000.
> eth2: VIA Rhine III (Management Adapter) at 0xe0080000,
> 00:0d:b9:14:1c:5a, IRQ 12.
> eth2: MII PHY found at address 1, status 0x7849 advertising 05e1 Link
> 0000.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> ehci_hcd 0000:00:0f.5: EHCI Host Controller
> ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:0f.5: irq 15, io mem 0xefffd000
> ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 4 ports detected
> ohci_hcd 0000:00:0f.4: OHCI Host Controller
> ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:0f.4: irq 15, io mem 0xefffe000
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 4 ports detected
> Done.
> Begin: Mounting root file system... ...
> Begin: Running /scripts/local-top ...
> Done.
> Begin: Running /scripts/local-premount ...
> Done.
> Begin: Running /scripts/local-bottom ...
> Done.
> Done.
> Begin: Running /scripts/init-bottom ...
> Done.
> INIT: version 2.86 booting
> Starting the hotplug events dispatcher: udevd.
> Synthesizing the initial hotplug events...done.
> Waiting for /dev to be fully populated...done.
> Activating swap...done.
> /etc/rcS.d/S11hwclock.sh: line 51: /etc/adjtime: No such file or
> directory
> Setting the system clock..
> Cleaning up ifupdown....
> Loading kernel modules...natsemi dp8381x driver, version 2.1, Sept 11,
> 2006
> originally by Donald Becker <becker at scyld.com>
> 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
> done.
> Loading device-mapper supportdevice-mapper: ioctl: 4.11.0-ioctl
> (2006-10-12) initialised: dm-devel at redhat.com
> .
> Checking file systems...fsck 1.40-WIP (14-Nov-2006)
> done.
> Setting kernel variables...done.
> Mounting local filesystems...failed.
> Activating swapfile swap...done.
> Setting up networking....
> Configuring network interfaces...Internet Software Consortium DHCP
> Client 2.0pl5
> Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium.
> All rights reserved.
>
> Please contribute if you find this software useful.
> For info, please visit http://www.isc.org/dhcp-contrib.html
>
> eth0: link down
> Listening on LPF/eth0/00:0d:b9:14:1c:58
> Sending on LPF/eth0/00:0d:b9:14:1c:58
> Sending on Socket/fallback/fallback-net
> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
> No DHCPOFFERS received.
> No working leases in persistent database.
>
> Exiting.
>
> Failed to bring up eth0.
> done.
> Starting portmap daemon....
> INIT: Entering runlevel: 2
> Starting system log daemon: syslogd.
> Starting kernel log daemon: klogd.
> Starting DNS forwarder and DHCP server: dnsmasqNET: Registered
> protocol family 10
> lo: Disabled Privacy Extensions
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> .
> Starting portmap daemon...Already running..
> Starting advanced IEEE 802.11 management: disabled via
> /etc/default/hostapd.
> nocatsplash daemon disabled - read /etc/default/nocatsplash.
> * Not starting internet superserver: no services enabled.
> Starting PPTP Daemon: pptpd.
> Starting OpenBSD Secure Shell server: sshd/var/run/sshd must be owned
> by root and not group or world-writable.
> Starting periodic command scheduler: crond.
> Starting watchdog daemon: watchdog.
> Remounting / as read-write ... Done.
> Removing /etc/nologin ... Done.
> Remounting / as read-only ... Done.
> /etc/rc2.d/S99voyage-util: line 34:
> /sys/class/leds/wrap:error/trigger: No such file or directory
>
> _______________________________________________
> Voyage-linux mailing list
> Voyage-linux at list.voyage.hk
> http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Punky
Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
- Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
- Network Engineering, Development Platform and Consultation
More information about the Voyage-linux
mailing list