[Voyage-linux] R6040 Support in Voyage 6.1

[Kim-man 'Punky' TSE]

Hi Max,

 From ifconfig, eth0 should be the network interface.  It is just that 
eth0 is not started or failed in getting DHCP lease?

Something a bit strange is that eth0 should use IRQ15 but I can't find 
it in /proc/interrupts.

Regards,
Punky

Max Bridgewater wrote:
> Hi Punky,
>
> Attached are three documents with the result of each of these commands.
>
> Ad Sean: curious to know which version of Voyage are you running? I've 
> never tried the CF because my notebook doesn't support one.
>
> Thanks again,
> Max.
>
> On Wed, Jun 24, 2009 at 2:10 AM, Kim-man 'Punky' TSE 
> <punkytse at punknix.com <mailto:punkytse at punknix.com>> wrote:
>
>     Hi Max,
>
>     I see r6040 driver is loaded via udev.  Please show me the output
>     of the following:
>     1. lspci -v
>     2. ifconfig -a
>     3. cat /proc/interrupts
>
>     - Punky
>


-- 
Regards,
Punky

Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
  - Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
  - Network Engineering, Development Platform and Consultation